Most Popular CURT for 2005 Ford F-350 Super Duty

Shawnee, took my order and answered my questions. the package arrived quickly with everything enclosed in great shape. Thank you etrailer.com I will continue to be a customer due to your great service.

Everything fit just right. Only problem I had was getting to the installation instructions with the QR code that sent me to purchasing a new hitch.

The hitch came in two boxes, one for the head and one for the side legs. The head box (coroplast) was perfect but the legs box (cardboard) was all but destroyed. The legs were not well packed and have several scuffs / scratches in the paint. Some right down to the steel needing repaint. Overall the hitch is a heavy, high quality unit and fit the truck perfectly.

I haven't used the hitch yet, but while installing it I noticed: 1) the 4 bolts which connect the hitch head to its legs, or base boxes, are a smaller diameter than the 8 bolts that hold the pin box onto my 40' 5th wheel trailer, and 2) when mounting the legs into the 5th wheel prep package on my 2019 F350, I found that a snug adjustment is not possible, because of one or both of these design choices: a) coarse thread bolts are used here (vs. fine thread), and/or b) there is only one hole through each of the 4 base mounting bolts for the cotter pin to go through, so the castle nuts can only be made tighter or looser by turning the nut 1/6th of a revolution. This means that when you lock the hitch down by rotating the handles 90 degrees, that the locked-in position either feels too loose or too tight because 1/6th of a revolution of the nut is too much. If these bolts had a 2nd hole in them (or were fine thread) that would allow a 1/12th of a nut rotation adjustment. Smaller nut height adjustment would also mean a much greater potential of being able to adjust the locking levers to a firm pressure setting.

Great experience. Called etrailer to ensure I had selected the proper 5th wheel hitch for my F-250 with OEM goose neck puck system. Hitch arrived earlier than expected in perfect condition. Installation was very simple (you will need a torque wrench at least 100 ft pounds). Coupling / uncoupling very smooth and positive color indicator very helpful.

RECEIVED QUICK. NICE UNIT. FIT RIGHT INTO MY FORD F250 PUCK SYSTEM -Surplus Process Equipment LLC

Good thing that etrailer.com put the Curt A16 box in a larger box for shipping. The outer box took a beating, but the inner box was barely harmed. Curt should have put padding between the two Ford OIM legs, they scratched each other a bit. The unit installed as per directions, and it looks great. Can't wait for our custom ordered RV to arrive. Thanks to etrailer.com for excellent review videos, and reading the FAQs helped me make my final decision as to which hitch to go with.

Installation Instructions and Hardware provided -vs- exploded Views do not agree. 14mm Bolts and Nuts with Nylon Inserts we’re only provided NO Flat or Lock Washers were provided as shown in the exploded views.

I received my #20000 curt hitch with slider rail a couple of days ago. The problem is I received two slider rails and no top hitch. I called etrailer to inquire about the shipment. The folks on the line were very helpful. They reordered the hitch head and made arrangements to have the extra slider rail picked up at my house which will happen in a couple of days if all goes well. Mistakes happen and I will see how it is corrected. I will wright another review when the hitch head arrives.

A great price shipped fast via freight. No issues with broken boxes as many others have mentioned. First fifth wheel for me, assembly and install into the factory Ford pucks was amazingly easy. Do not know for certain if the slider will be necessary for our new Arctic Wolf camper. We may swap out for stationary legs if we can get away with it. I love etrailer!

Truly happy with this product and can't wait to go to work! etrailer sent me everything I requested and the installer had no problems. Everything was packed well in shipping with no problems.

I’m very happy with the ease of ordering and the information videos that Curt had available before I made my purchase. When I received myQ24 hitch it was great quality and very easy to assemble it also works better than expected. Thank you etrailer

I have ran a cheap competitor hitch for several years. A manufacturing defect (welded pivot pin) caused the hitch to fail and resulted in 18000$ damage to my truck and trailer. I chose the Curt 25000# hitch after much research and found it to be very well made and clearly shows when it is properly coupled. It is quiet and operates with minimal klunking and chunking going down the road. Overall I am very pleased.

Mounted this hitch on my flatbed 3500 Ram and the hitch works flawlessly. Pull 44' tri-axle weighing in at 23,000# with ease. Very easy to use and understand, very easy to maintain.

I received excellent professional service and experience Thank you for your time.

Poor, and disappointing. Hitch is not even close to tall enough for most any camper. Can’t even get a finger between the bed and camper. Description is not accurate. Be weary. etrailer is also charging me to return for a taller hitch. Looks like I’ll be purchasing somewhere else unless they can make it right somehow.

Very good quality and well made fifth wheel hitch...No problems

I bought a new trailer recently that weighs 16k and I just didn't feel secure using my Reese pro series 16k to Haul with. So I started looking at various hitches. I've had 3 other fifth wheel hitches in the past. All of them have been 15 and 16k models. What I never liked was the latching system. I've even had a trailer come out of the hitch due to a poor latching hook up. There wasn't an good way to lock the hitch. Some of it was my fault and some was a poor design. When I saw the Curt Q20 had a latch on the handle and also was color coded I was hooked. This hitch satisfied my want list. It arrived 4 days after I ordered it and like other comments I've read it was full of heavy duty staples. It was double packaged. There had to be over 50 staples. It was defiantly packaged securely. After dimantaling the packing I finally got to the hitch. There were a few scratches on the hitch from all the staples but a bit of black touch up paint took care of that. After all the hitch is going to be used and get scrached by me anyways. Four bolts and it was together. It fit perfictly it my existing rails. By the way it's heavier than my other hitches. I wound be apprehensive to pull my new trailer. If your looking for a great hitch at a great price you can't go wrong.

Curt A16 with Slider base for Ford OEM Pucks I went through a good bit of anxiety after trading my 2013 F-250 for a 2018 F-250 due to the height of the 2018. I did not pay close enough attention to bedrail and rear height and I was beside myself sick over it so this review might be a bit long while I explain my journey. I replaced a 2013 F-250 4WD with a Reese Pro Series 16K square tube slider universal mount with a 2018 F-250 with OEM pucks. I pull a 2015 Prime Time Crusader 315RST. I measured, I had boards with levels, mock up on hitch height, I read every forum and article I could find and still I was worried I had made a big mistake. Finally, I called eTrailer and talked to Molly and she had, (or went and got) plenty of answers as I had narrowed it down to the B&W BWRVK3370 20K Companion Slider and the Curt A12. I decided to not go for the “the most expensive is better” and went with the Curt A12 saving me about $300. The 20K B&W was the smallest they had and with an F-250 I would never really come close to that weight before I passed the GCVW limit so it made no sense. The Slider base for the Curt says it is the same base used up to 24K so if I ever do I can just buy the new head I believe. Ordered on a Saturday it arrived on Thursday at noon. No issues with shipping at all, the hitch came in 2 boxes strapped to a pallet. No damage like others experienced. Assembly took me about an hour because it is heavy and awkward to line up the slider linkage but all in all nothing too difficult. I set the hitch head mount at the 2nd from the bottom (18 inch) hitch height because I had measured the truck and camper and was worried about having 6 inches of clearance camper to bed rail. Turns out on a 2018 F-250 4WD at the 18-inch level on the hitch I have 8 inches all around and 7 inches at the highest point on the tailgate. After I installed the hitch and put the camper on the truck and applied weight I got about 3-4 inches of squat, which made the already rear high truck sink to near level. I do have more nose high attitude on the trailer than I had before but it was not terrible. I moved the height adjustment down to the 17 inch (lowest) today to lessen the nose high attitude by another inch and I have 6+ inches clearance still. The hitch. Like I said before I had a Reese Pro Series 16K slider and it was noisy as hell. Kingpin clunk starting and stopping, creak at every bump and turn. I put the Curt A16 in and took the trailer for a drive with the rear slider window open and heard nothing. Absolutely nothing. No start/stop clunk, no creaking, nothing. Hook up was very easy and the interlaced kingpin jaws make visual check very easy. Operating the slide takes a bit more effort but it worked fine and locked securely. It did not latch back to maneuver and then back again to towing automatically like the video without jostling the handle a little but I am sure it will once broken in and I grease it a bit more. The puck system was easy to adjust and make a solid connection to the truck with no play. I could not be more pleased with the hitch. Cons- The hardware was packaged like one would expect and it was all there but the bolt for the center connection of the slider linkage was different than the handle and passenger side joints. It is too small and caused a lot of play. I used it anyway but it allows play in the handle and not firm for unlatching. I will replaced it today and now it works great. eTrailer is now my go to store for trailering supplies.

2017 F250 curt A16 slider Ford prep package

Easy to install, great quality

Doesn't operate as easily as I hoped. Sticks when trying to slide which means jumping in and out of cab many times. Also its heavy as it should be,but it doesn't come apart easily for removal in two pieces that can be lifted separately. You need a winch to remove it safely. Its a pain in the you know what. I like my old two piece hitch better. I could take it in and out in a few minutes, but it won't work in my new f350.

Ordering from etrailer was a great decision! I got a confirmation email for my order within minutes and an email it had shipped in just a few hours. I was given an expected delivery date and it actually showed up a day early. I’m super impressed with the customer service! I bought a fifth wheel hitch and found an [online] video for my truck and hitch that was extremely helpful, especially since all the RV dealers in the area were two months out to install it. All in all dealing with etrailer has been a great experience and I will definitely be going back for any of my other RV needs!

Ive been using this fifth wheel set up for about 5 months now and I don't have any complaints. I pull a 2022 Heartland Cyclone 4006 toyhauler fifth wheel. Loaded down its usually weighing between 18 to 20,000 lbs depending on what we are hauling.

This can be easily put together and installed by one person. I had to put the base into the universal rails loosely and then torque the bolts to spec. This hitch was an upgrade.from the autoslide hitch I originally purchased for my 5th wheel. The noise and banging has disappeared. This hitch was well worth the money. I also purchased the custom fit wedge for my pinbox. I don't believe I could be any happier with this hitch.

This hitch is has certainly served its purpose. Easy to use and reliable. My only complaint is that I can't seem to separate the hitch plate from the base. I thought it would be easier to separate the two components.

Install was easy and the hitch performs perfectly. I have ZERO complaints. Even a year later, it performs great.

Love it. Easy to take apart and move! The instructions were very clear on how to assemble. I pull a 43ft camper and have yet to have any problems! Well worth the $$

Of all the products I have purchased from E-Trailer, the CURT 5th wheel hitch has been the most disappointing. After installing the unit, I noticed workmanship items that are not consistent with a high quality unit. The legs and main body did not consistently align and there is excessive chucking (in my opinion) that occurs while traveling. When I addressed this with CURT, I received no response regarding the misalignment and was told the chucking was within industry standards! Two previous 5th wheel hitches did not "chuck" as this unit does. When I addressed these concerns with E-Trailer and requested a refund, I was informed since the unit had been installed no refund was allowable. I asked how I would hear/feel the chucking w/o installing and got no viable response then as well. I will eventually go with a GenY gooseneck adapter. Do not support CURT, they do not stand behind their products and customer service is pretty much nonexistent!!

Excellent on all levels. Fast shipping via right company.