# 1
Pro Series Gooseneck Coupler - Adjustable - Round - 2-5/16" Ball - 25,000 lbs
I am very satisfied with the gooseneck hitch I ordered from you. The delivery was very prompt also. Attached is a picture of the trailer in progress. I will send a picture of the completed trailer when it is finished. I am very glad to find you. Thank you. Roy Ellerbee
Glad to see etrailer.com carry some fabricating parts. Modified this coupler to convert a fifth wheel to goose neck. Excellent product!
# 2
Ram Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - Square - 2-5/16" Ball - 25K
Some of the welds looked a little rough and there was quite a bit of spatter on the tube, but with that said, there's no way you'll find a better value for the money. Since I had to weld the hitch on anyways, I cleaned the spatter off with a flap wheel and went over the welds I wasn't happy with. I wouldn't hesitate to purchase another one.
the picture on the internet for this item shows 2 jam bolts before you hit purchase. then after you hit purchase it shows a single bolt. im not sure what we received yet. but its confusing. other than that great service.
# 3
Ram Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - Round - 2-5/16" Ball - 25K
Receive my product replacement gooseneck lockdown system built heavy duty simple to install and the locking system is monster us I think it will very much suit my needs easy to unlock and lock I would definitely be proud to endorse a product like this and you can’t beat the price everyone I looked at that was like this [was almost double the price] or better shipping was great and quick thank you
Haven’t installed the coupler yet, have to clean up a couple welds that went too far into the area where the ball goes then paint. Test fit into existing tube on trailer showed it was a little loose, not a big deal as it is tighter in the tube it came with. Overall happy with the hitch and price point.
# 4
Bulldog BX1 Gooseneck Coupler - Adjustable Height - Round - 2-5/16" Ball - 25,000 lbs
Perfect fit in the old receiver tube and the lower profile will allow me to level the trailer.
All the reviews said this is good for higher vehicles, to level a load. The distance from bottom hole to gooseneck is 10.5 inches, exact same hight of the coupler that came standard on my trailer. The raw finish comes with a nice coat of rust on it, so be prepared to clean all that up as well.
# 5
Pro Series Gooseneck Coupler - Adjustable - Round - 2-5/16" Ball - 25,000 lbs
the service was great ,had one item that was going to be a couple months later shipping and the folks at etrailer called to make sure that was fine but they ended up finding, another item that would work and had my order to me by the end of the week ,great service team at etrailer will definitely use them again
Love this hitch! Holds well and looks great! They were so much help with finding us the perfect hitch and shipped it out quickly.
# 6
Bulldog Gooseneck Coupler - Adjustable - Round - 2-5/16" Ball - 25,000 lbs
everyone was very nice and helpful. well made piece. thanks walter
Once I submitted my order- I received a email within hours stating "My order has been shipped "!! This is un-heard of! I received the order in 2 days - Free Shipping!! Customer Service is Top Level. I am a repeat Customer and have been 100% Satisfied with each order- Always packaged Well and Products are as represented in add - Buy with Confidence. Special Thanks to George J and Carol C and all the Staff at etrailer.com
# 7
B&W Defender Locking Gooseneck Coupler Inner Tube - Round - 2-5/16" Ball - 25,000 lbs
Nice coupler but DO NOT USE this coupler in a recessed ball hitch on a flat bed! The handle did not clear the sides of hole and the first turn i made snapped her off.
This fit the bill perfectly / exactly what I needed Great people to work with and they speak real "English" ! something that you dont find anymore The freight was very fast Thank you from Northwest Wyoming Don
# 8
Gen-Y Spartan Shock Absorbing Gooseneck Coupler - 5" Offset - 2-5/16" Ball - 3.5K TW
This seems to be an excellent upgrade to the coupler on my Belmont trailer. Less than 100 miles on it so far but the trailer seems to jerk the truck around less on these fine Pennsylvania roads. It is helpful to have an extra pair of hands when installing. The powder coating made the tube on the coupler a little thicker than the original. I used a wire brush and some spray lithium grease on the inside of the trailer tube and was able to install the new coupler just by working it back and forth with minimal powder coating coming off. My trailer is registered at 9,999 lbs which is why I went with the 3.5k TW option. Haven’t had an opportunity to put a machine on the trailer yet to see if that was wise or not but a load of 18 - 6”x6”x12’ pressure treated beams barely moved the indicator. After my first trip I opted to change it to using the hole closest to the coupler as the trailer had a little too much angle back towards the last axle. Even in the bottom hole I still have 9” of clearance between the top of my tailgate on my Ram 2500 and the trailer.
The difference is substantial! I won’t say you can’t tell the trailer is back there but the ride comfort is outstanding!!!!
# 9
Gen-Y Spartan Shock Absorbing Gooseneck Coupler - 5" Offset - 2-5/16" Ball - 5.5K TW
I don't see how I lived without this. We often experienced a "bucking" when crossing bridges or even on certain roads with expansion joints. We were getting bounced around so much I can't imagine how our horses survived. This product has removed that completely. It also provides a slight offset if you have a shortbed. I have an 8' bed, but welcome the extra space between my tailgate and the trailer. Well worth the money! I will never tow a gooseneck trailer again without this.
What our customers are saying:
"Easy place to shop. Fast delivery and great products. Very happy with my purchase."