# 1
Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black
Very solid and heavy duty jack, with bright LED lighting, manufactured by Ram. Adjustable foot piece for quicker adjusting... Jack pretty easy to install, with single wire electrical connection and 3 bolts. Jack has low gear ratio and foot shaft moves slowly, but has plenty of power to lift front of trailer. Plenty of clearance behind jack for propane tank cover on our Airstream. Replaced more expensive model that was bent at mounting flange being winched onto transport trailer.
Installed the new RAM electric tounge jack on my enclosed car hauler trailer. Very happy with this unit. Quick install, like the adjustable foot pad, and operated smoothly. etrailer packages well and deliveries quick.
# 2
Landing Gear Set - 36-1/2" Lift - 8,000 lbs
The gear box is the higher quality metal (aluminum) kind. If you have plastic it will be a big upgrade. The telescoping square connecting shaft that goes between the legs is a noticeably much thicker steel than the OEM one, though it is not painted and does not seem to be galvanized. I wiped it down with a thin coating of WD-40 to prevent rusting. The legs themselves are much the same as the OEM lippart legs that I had but with a few added features. These legs have an easy to remove top plate that is secured with screws (OEM had roll pins that had to be punched out). They also have grease zerks for the gears and the lead screw. There are tapped holes on either side of the leg so that you can orient the zerks for easy access no matter what orientation your rig calls for on installation. There are plugs that go in the unused holes to keep grease from squirting out. This is a huge plus. The main reason that people have problems with landing gear legs is because the lube dries up and the legs seize or become difficult to actuate or the gears get stripped. The only negative thing that I have to say about the legs is, they have a little more play than the OEM ones (inner leg that sleeves into outer leg has a little play). This is not a problem for me because I have stabilizer bars connected to them. But it could bug some people because it would add slightly more shake to a rig with no stabilization. If you want to replace some aging legs that don't work well this is a very good high value way to do it. Knowing what I know now, because etrailer has such great high value parts, I would buy two gear boxes Item # RVLG-RDBOX, two lead legs Item # RVLG-LEGL, two motors Item # M1230 and a second switch # LC138415. This setup would require proper wiring and fusing for the second switch/motor but would give you dual drive and front leveling capabilities.
These worked great and were a good price.
# 3
Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 1
Perfect fit for my Pull behind Motorcycle trailer project. Looks solid and fast shipping! Thanks etrailer!
Excellent product, I can't wait to install it and try it out. So far it seems very strong and capable on Do it what it was design to do.
# 4
Electric Jack w/ Footplate - Drop Leg - A-Frame - 25-1/8" Lift - 3,500 lbs - White
Ok.... the customer service from ETRAILER totally saved the review! These guys are incredibly awesome. I ordered 2 of the jacks. The first came with a broken housing cover , the light had beed disloged, and the up down switch was wired backwards. (Up would put the jack down and down would put the jack up) Solution? Glad you asked! I contacted ram about the cover.... waiting! The light was easy to correct, just had to slide it back into the slit that holds it. Switch, well.... if-your2 not comfortable with wiring, I recommend not even attempt to rewire. I just popped it out of the cover, twisted 1/2 turn, popped it back in. Total time to correct.... 8-10 minutes. Total time to install, 15 minutes. Total job less than 30 minutes. Would I recommend this jack... YES. Despite a shipping issue to crack the housing ... its easy to install, price right, powerful. I dont have to hand crank. Simple correction to the switch. And they could use some r&d improvment on the light... but excellent jack! It does what i meeded it to at an affordable price!
We recently replaced our Lippert Power tongue jack with a Ram from etrailer. The jack works well raising and lowering the trailer but the motor sounds very labored. We are concerned how long this jack will last.
# 5
Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1
This was a perfect replacement for a damaged jack. This is a quality product for a very fair price. This is not my first order with etrailer.com and will not be the last. Every product I have ordered is high quality and shipped quickly. I am never disappointed.
Cathy T was most helpful with all my questions. I ordered the RAM 2,500 lbs. jacks to replace my OE jacks on my 2018 Sonic 200VML TT. My OE jacks BAL were poorly designed ,and cheaply manufactured using very thin materials (flimsy) , The RAM jacks use thicker materials ,and bolts in manufacture. RV does not wobble now.
# 6
Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
Seems to be good quality, perfect replacement for the 30+ year old Attwood landing gear that wore out. Installation was fairly quick and easy, with two small issues. First, had to sand down a plastic spacer between gear box and drive bar for bolt to fit. Second, I have to replace the screws that hold motor to gear box, threads on new gear box start 1/4 in back making old screws too short. I was impressed that the jacks have two grease zerks and came well greased.
After one side of my landing gear failed I looked a lot of places for a replacement. etrailer had the full set at a lower price than others had for just the one leg. Reasonable shipping times, everything arrived safely. Best price at least for this item.
What our customers are saying:
"The phone operator was very helpful and made my purchase easy. I will keep this website handy."