Yes the Aries ActionTrac bracket kit part # AA3025170 is the correct fit for your 2015 Jeep Wrangler Unlimited as the correct kit that includes the steps is part # AA3036570. view full answer...
My contact at Thule advised that for the crossbars on your 2014 Jeep Grand Cherokee that have lock core 163 you can use their Replacement Key # THKEYN163. This is sold as a single key so you might want order a few to keep spares on hand. view full answer...
You may purchase replacement drawbars for the Roadmaster EZ kits. Each base plate has its own specific draw bars that you must use. They are of a specific shape and design to be used on a specific vehicle so you cannot interchange them. For replacements for base plates you will need # RM-ARMS. Use the instructions, linked to the right, which is actually a form that needs to be filled out to ensure the new replacement arms will fit. If you need replacements for the 2005 Jeep Liberty, the... view full answer...
The base plate kit we carry to fit your 2017 Jeep Wrangler Winter Edition is Blue Ox # BX1133. It's the only kit we offer that fits the Winter Edition.
In addition to the base plate kit you'll also need a tow bar, wiring, a supplemental braking system, and likely a high-low adapter.
To pair with the Blue Ox base plate kit I recommend the Avail # BX7420 for a tow bar. It has a higher weight capacity than most at 10,000 pounds. Also, the safety cables are included.
To power the Jeep's... view full answer...
The head design for the Draw-Tite (and now Reese) weight distribution system has changed over the years, so your existing round spring bars won't be compatible with the current style head (which would be the Reese part # RP58112). The original head to match what you currently have is no longer made.
This means your only option will be to upgrade to an entirely new weight distribution system. If you can tell me the capacity of your existing system, or the loaded weight of your trailer,... view full answer...
Yes, you can buy just the arms for the Roadmaster Direct-Connect Base Plate Kit part # 1419-8 on your 2003 Jeep Grand Cherokee and for that you will want to use the Roadmaster Replacement Arms for Base Plate Kits part # RM-ARMS. In order to use the above with a Blue Ox Tow Bar you will also need the Blue Ox Tow Bar to Roadmaster EZ5, MS, and MX Base Plates Adapter Brackets part # BX88185. view full answer...
I can give you some information to help you determine if the Lead # LC179013 and Follow # LC179014 legs will fit your 2004 Arctic Fox 29.5E 5th wheel, but we don't really have a database to pull from when it comes to OEM part numbers on trailers.
Both legs have an overall height of 32" with an outer tube width of 2-1/2" and an inner tube width of 2-1/4". The total travel distance is 21" with a 16" drop leg travel.
To determine if these will fit directly to the brackets that you currently... view full answer...
The Invisi Brake # RM-8700 and the Blue Ox Patriot II part # BRK2019 are both supplemental brake systems but they are pretty far apart in every other way. The # BRK2016 is a much simpler to install setup that works very well. But you have to install and remove it every time you want to flat tow/drive. For this style though it is the best setup.
The Invisibrake requires a one-time in-depth install that will take some time, but once installed it works great. If this is more like what you'd... view full answer...
I checked with Yakima and unfortunately they do not offer replacement hinges for their Space Booster line of cargo boxes anymore. This line has been discontinued and you may be able to find used parts on classified ads or personal listings, but they are no longer on the market as replacement parts.
I know this isn't ideal, but the best solution we can provide is a different cargo box entirely. Yakima's new cargo box line is called the SkyBox and they offer a 12 cu ft version, part # Y07334.... view full answer...
I was able to find that your 2005 Haulmark TS6X14DS2 trailer has a 3500 lb axle. What I was not able to find was if you have a torsion axle or leaf spring suspension. If you have leaf springs, I recommend the Dexter axle # 35545E-ST-89 which has spring locations that are 74 inches center to center and hub face to hub face measurement of 89 inches.
If you have a torsion axle, then I recommend replacing your axle with the Timbren Axle-Less Suspension System that uses rubber springs for... view full answer...
Unfortunately, I don't recognize the part you have attached. Can you please identify what system you have for me that way I can make sure you get the correct replacement? If you don't know which system you have send me a photo of the entire mounting foot and I will do my best to identify it for you. view full answer...
It sounds like you are needing the replacement rubber strips for the bottom channel of your Thule AeroBlade Load Bars. For this you will just need the Replacement Bottom Channel Cover # 852-4498-001. These are direct replacements for your crossbars and will definitely eliminate that whistling that you have been hearing since the pieces came out.
This includes 1 rubber cover strip, so you will need to order 4 to replace both strips on each of your crossbars. view full answer...
The Hopkins Replacement Break-Away Switch, Item # HM20014, will work for you. Break-away switches are pretty universal in their design and function. The lead wires measure 44 inches.
I have attached some additional information and a video to assist you with your replacement project. view full answer...
The replacement bolts you need are the Replacement 12 x 40 mm Hitch Bolt for Thule Hitch Bike Racks and Goalpost Hitch Mounted Load Bar, part # 908-1240-54. These are the bolts that connect your T2 Classic Add-On to the backbone of your T2 Classic.
I have included product description links below. view full answer...
The correct replacement lid/dome for a MaxxFan* 4751KS is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part # MA10A40009K for black or part # MA10A40002K for white. view full answer...
The only replacement part we have available for the original Blue Ox Patriot (BRK2012) is the Replacement Brake Claw # BRK2512. Unfortunately, this system was discontinued in 2017 and there are no other replacement parts available any longer. You may be able to find a replacement on the second hand market, but that will entail a lot of searching and patience.
The best option we have is to upgrade to the newest iteration of Patriot, the # BLU37TR. This is quite a bit more compact than the... view full answer...
The Yakima LockUp Hitch Lock and Cable Lock - Same Key System (SKS) # Y07238 is the cable lock and hitch lock you are seeking. This comes with same key lock cores and keys.
For your pin, you will want the Replacement Mounting Hardware for Yakima BigHorn, FlipSide, DoubleDown, and SwingDaddy Bike Carriers # Y8890176. view full answer...
You will need either the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles # 8-259-50UC1 for 8-12" wheels or the Assembly # 8-258-50UC1 for 13-15" wheels. Both these hubs use the 1-1//16" Bearing # L44649 for inner and outer bearings. And they use a Grease Seal # 10-9 (1.50" inner diameter). view full answer...
Without knowing what slide topper you have, I cannot say with 100% certainty what assembly you need. The odds are good that you have a Solera slide topper and the correct option for the right side would be the Replacement Right-Side Head and Roll Bar # LC34FR which fits all Solera RV slide-out awnings.
The # LC87FR you mentioned is for the left side and the # LC79WD is for the Lippert Solera 5000 Series slide topper specifically. view full answer...
Go To Results