The transmission cooler part # D13504 would be exactly what you need. This is a large cooler that would work well for your 2007 GMC Yukon Denali. I attached an install video that shows it being installed in a very similar 2009 Yukon as yours.
Your engine temperature doesn't really seem that bad at all. But the transmission cooler will help slightly with that since it will allow the factory transmission cooler to run cooler as well which is connected to the radiator. Also the transmission... view full answer...
The weight distribution system I recommend for your trailer and Cadillac Escalade is the Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 10,000 lbs GTW, 600 lbs TW # RP66082. The vintage style of your trailer is more prone to crosswinds and passing vehicles so this system is the best for actively working to prevent sway. You will also need the hitch ball # A-6 for a 2-5/16 inch hitch ball or # A-90 for a 2 inch hitch ball.
The Husky # HT32217 is too big a system... view full answer...
I took a look at the online version of the owner's manual for your 2014 Cadillac Escalade and found that it features a towing capacity of either 8,300 pounds for the 2WD model or 8,100 pounds for the AWD model. I do still recommend verifying this by checking your copy of the manual but based on this information your Escalade can absolutely pull your Lund Pro Boat that weighs up to 4,362 pounds (as long as the weight of the trailer itself doesn't push the combined weight over the vehicle's... view full answer...
We currently have five bumper mounted 2" trailer hitch receivers that will work with the 4" x 4" bumper on your trailer. I have attached these options for you but I recommend using the Curt RV Bumper 2" Trailer Hitch Receiver part # E-100. This trailer hitch uses steel plates to surround the bumper as opposed to the u-bolts in the other options. The steel plates will provide more support and also look much better than the u-bolt options.
If you also need a cargo basket for your generator... view full answer...
On your GMC Yukon Denali XL, you can add a transmission cooler to your existing factory transmission cooler. I recommend Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV # D13504 which you were looking at due to its design.
This cooler will work well in-line of your current factory transmission cooler system which I recommend keeping. view full answer...
I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part # STL36RB and # STL37RB.
It looks like the spare tire mounts for your trailer are something you would have to get from Featherlite though as they aren't like anything we carry. view full answer...
Your 2008 Cadillac Escalade does have brake controller wiring under the dash but there isn't a connector/port on your vehicle. Instead there are just 4 blunt cut wires that you'd need to wire to a brake controller. I attached a help article link on this page that covers exactly where they are and how to make the connections for you to check out. For a brake controller the Brake EVN part # TK63VR is a really solid choice. This controller is proportional so it can sense exactly how hard to... view full answer...
I would love to help but we don't have any bearing or seal information for specific trailers. This is just not information that the manufactures release to the public. If you want to find the correct replacement bearings and seals you will have to get your hands dirty, there is no way around this.
If you absolutely don't want to rip apart the hubs/drums and read the bearing numbers or measure the spindle using the attached article then there is one other option and that is to look for... view full answer...
The Konig Tire Chains part # KON44FR are what I recommend for 275/55R22 tires on a 2023 Cadillac Escalade. These chains have a class s rating which means they are very low profile, adjusters for automatic tensioning, and nylon bumpers to protect the vehicle's wheels. They are also very easy to install as you can see in the attached review video. view full answer...
Both the Firestone # F4108 and Air Lift # AL60769 helper springs are confirmed to fit your Cadillac Escalade as long as you don't have the auto-leveling option. If your Caddy has the auto-leveling you'll need to go with the Firestone.
There isn't a lot to separate the two. They install the same and have the same purpose and ratings. Firestone does have the brand recognition. You really can't go wrong either way. view full answer...
Brake controllers are not vehicle specific items, so you can use any brake controller you want on your 2014 Cadillac Escalade. Our fit guide information is based on the information released by the manufacturers and our brake controller manufactures simply have not released brake controller information on the 2014 Escalade yet. I have attached a link to all of our brake controllers for you to check out.
The brake controller that I recommend is the Prodigy P3, # 90195. This is one of the... view full answer...
The brake controller I recommend for your 2018 Cadillac Escalade is the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR because this brake controller senses the amount of braking you are applying on your vehicle and applies a proportional amount on the trailer brakes. It also has a very small knob that gets mounted basically anywhere you want on your dash or console. I attached a picture of what it will look like installed.
To install it all you need is the custom fit install... view full answer...
The Pollak Connector PA66GF30 I believe is the same if not similar to the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket part # PK11893. If that is the case you can use the Mounting Bracket part # PK12711U and Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket part # C57202 to mount this to the trailer hitch. view full answer...
For your 2018 Cadillac Escalade the Timbren Rear Suspension Enhancement System # TGMRYS4 will work great. These jounce-style springs are confirmed to fit your vehicle and will simply replace the factory bump stop on the frame to provide additional support and improve the overall performance of your rear suspension. I like the Timbrens over air spring alternatives because they don't require any attention after the initial installation. With air springs, especially if you change the type... view full answer...
The correct harness needed to install your Prodigy P2 Brake Controller # 90885 in your 2006 Cadillac Escalade would be the # 3015-P.
There may be a few underhood connections that you will need to make as well. Check out the FAQ article I attached to right for more info on that. view full answer...
The most low-profile roof rack option we offer for a 2021 Cadillac Escalade ESV is the Thule WingBar Edge Crossbar System composed of part # TH76FE, part # TH89SC, and part # TH95JW. These aero shaped bars will blend in very well with the vehicle and provide very minimal wind resistance. They will work great with pretty much any cargo box whether that be one from Thule, Yakima, Rhino-Rack, Inno etc.
I recommend first installing the roof rack and then measuring from the top of the crossbar... view full answer...
There are a few underhood connections that need to be made when installing a brake controller in a 2004 Cadillac Escalade like what you have. To see a guide for this check out the link I attached.
The correct harness to use is the # 3015-P to install the P2 # 90885. view full answer...
I have a solution for you. Even if you have a charge line to your battery in the 2019 Escalade, there is a risk that the motorhome will actually drain the battery when the Escalade gets to low on power.
I recommend using the Roadmaster Automatic Battery Disconnect with Switch for Towed Vehicle w/ Supplemental Braking System # RM-766. It is going to give you the easiest disconnect, just a push of a button. When you are ready to restore power just put the button again.
You will still need... view full answer...
The Blue Ox Base Plate kit part # BX1716 has been confirmed as a fit for your 2016 Cadillac Escalade with adaptive cruise control and because of that would not interfere with it.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the Blue Ox Avail part # BX7420 which includes safety cables. The coiled design helps keep the cables off of the ground.
For... view full answer...
I recommend going with the Tekonsha Primus IQ # TK90160 because it's a simple proportional controller that has a solid reputation backed by a limited lifetime warranty. To connect this to your 2004 Cadillac Escalade you just need the Wiring Adapter # 3015-P.
Attached is an installation video using the wiring adapter on a 2004 Chevy Suburban for you to check out. view full answer...
Go To Results