I spoke with my contact at Camco and he informed me that the Backflow Preventer part # CAM23303 that you referenced should be installed after the water pump. view full answer...
Normally when there is a short circuit it will blow the converter box no matter what the brand is. But sometimes it will only affect the one function that shorted like what you have experienced. It could go either way but regardless of what does happen you would need to replace the converter to fix the issue.
We do have the plug in style T-connector # 118418 that you can use instead of a hardwire harness if you hare interested. I have linked instructions and a video for you to view.
You... view full answer...
The Inno Roof Rack with bar part # INB127 will install its clamps over the trim into the door of the vehicle. Your fit kit, part # INK124 will hook over your door frame and install the foot pack into the bases over the side of your roof's lip. I've included the illustrations from the instructions as a point of reference to how this should look installed.
I've included an installation video for the 2017 Nissan Maxima so you can see an installation process on a similar 4 door sedan. view full answer...
I have included a link to the instructions for trailer hitch # C11181 for you to view. On a 2002 Saturn SL sedan there are 7 steps which you will see in the instructions, and I have listed here:
1a.) If vehicle is equipped with tie-down brackets and/or existing weldnuts, remove the brackets from inboard side of the frame rail by removing three M12 bolts, each side. Return tie-down brackets and bolts to vehicle owner for reinstallation if hitch is removed.
1b.) If vehicle is not equipped... view full answer...
The Camco RV Portable Propane Campfire # CAM58041 has a built-in regulator so it can connect directly to your RV's high-pressure propane feed. My contact at CAMCO confirmed this is the preferred installation method.
It comes with an 8 foot hose for you to use to connect to your RV.
The part # CAM59143 does come with fittings that would allow it to be compatible with the fire pit as well. view full answer...
No, you will not have to uninstall and then reinstall the wiring on your current 6-Way or 7-Way wiring harness to use the Trailer Connector Mounting Box part # 18159. view full answer...
The first thing you will need to do is make sure you have the correct trailer wiring harness that fits your 2005 Saturn Ion. The Curt T-Connector, # C56036, is the confirmed wiring harness for your Ion. The harness plugs in to existing OEM plugs on the car. The harness also includes a converter to match up the trailer's wiring with your Saturn's wiring.
The Saturn runs two wires for brake and turn signals, while the trailer run one wire for both turn and brake lights. The converter helps... view full answer...
We have a solution that matches what you are looking for, but the Curt cargo carrier part # C18151 that you referenced does not have a hitch opening at the front of it for a bike rack to attach to.
Instead you'd want the Hollywood Racks Cargo Carrier Bike Rack # HR1400Z-85 which comes with both a carrier and a bike rack. This can be used in three configurations. Bike rack only, cargo carrier only, and bike and cargo carrier. view full answer...
I have a very similar Michelin wiper on my car that uses the J-hook style of attachment and I remembered that I had a hard time getting them to install as it seemed like the J-hook was too big.
I eventually figured it out though, the hook goes around the entire pivoting assembly.
I went out and took a picture of how it looks installed on my car to help you visualize what I am trying to say. view full answer...
I looked up some videos on line for replacing the rear windshield wiper of your Saturn Vue and found that to remove it from the big plastic housing you will basically just want to pull directly away from the housing. In other words you would pull the wiper away from you and towards the front of the vehicle. In the video it the owner had to pull pretty hard but it will come straight out.
For a replacement rear blade you would want the part # RX30212. view full answer...
Yes, we have instructions for the Draw-Tite Trailer Hitch, item # 75556, linked on our website, see link. This hitch installs easily with just 4 bolts and 4 conical washers. I've also linked an install video on a 2009 Vue. view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11447 is compatible with the 2006 - 2007 Saturn Ion Ion3 with 2.4L Engine and the 2004 - 2007 Saturn Ion Red Line. If you don't have the Red Line, the 2005 model won't fit with this hitch receiver. You will need to instead use the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11115 which is compatible with 2003 - 2003 Saturn Ion, 2004 - 2005 Saturn Ion excluding Red Line, 2006 - 2007 Saturn Ion excluding... view full answer...
To test the tail light wires on your 2005 Saturn Vue using a multimeter you will first set the meter to read voltage. There should be several settings to test voltage but you want the lowest setting. Then you can either pierce the wires to test them or unplug the tail light and test the connector pins (if equipped).
Have someone sit in the car and run through the light functions while you test the wires. The functions that power on should be near 12 volts and the others should not show... view full answer...
The Curt Manufacturing Class I Trailer Hitch Receiver with Drawbar, item # 11114, for your 2008 Saturn Sky, will not void the vehicle warranty as long as all of the towing limitations of the vehicle and the hitch are closely adhered to.
There is a federal law called the Magnusson-Moss Warranty Act, which states that unless the modification to your vehicle, in this case the hitch, caused the problem your warranty must be honored. This being said you will need to use common sense precautions... view full answer...
The brake controller would connect to the wires under the dash as follows:
Orange vehicle wire connects to black wire from brake controller.
Black vehicle wire connects to white wire from brake controller.
Dark blue vehicle wire connects to dark blue wire from brake controller.
Light blue vehicle wire connects to red wire from brake controller.
The remaining wire is for an illumination circuit which is NOT needed for the brake controller. The extra wire can be taped off and bundled up... view full answer...
The Swagman Trailhead # S63360 (And any hanging bike rack for that matter) will generally need a frame adapter bar for bikes that do not have a horizontal top cross tube like a traditional men's bike does. The same often goes for children's bikes.
The Kuat Ubar Bike Frame Adapter Bar # UB01 is an adapter bar that will help you. It connects from the seat post to the handlebar stem to create that horizontal mounting point to carry bikes level on a hanging rack.
Another option is a platform... view full answer...
The Curt T-Conenctor Vehicle Wiring Harness, part # C56026, for your 2008 Saturn Vue has a circuit protected powered tail light converter (Modulite). This converter powers the trailer lights from a separate wire, with an inline fuse, that is ran to your vehicles battery. If you do not connect that separate wire to the battery you will not be able to get working lights on your trailer.
This harness uses the vehicle wiring as the switch to activate the trailer lights, only requiring about... view full answer...
I attached a link to the right that has the installation instructions for the Tow Ready Wiring Harness part # 119178KIT you referenced. I also attached an install video that shows this harness being installed on a similar Saturn as yours.
Your local hardware store should be able to set you up with a self-tapping screw to use for the ground wire as well. view full answer...
The MagnaFlow Heavy Metal Loaded, Stainless Steel Catalytic Converter - Universal # MF99204HM is a weld on only installation according to the manufacturer. view full answer...
It might be possible to bolt the feet kit part # RRRLT600 directly to a vehicle roof but since that's not how these were intended to be used it would not be my best recommendation. Your best option for a roof rack for your 2008 Saturn Aura would be the Inno part numbers # INB127, # INSUT, and # INK219 which attaches using door clamps instead. This gives you a very secure roof rack that does not modify the vehicle in any way. Drilling into the roof would pretty easily introduce leaks too. view full answer...
Go To Results