The easiest way to find the correct anode rod for a water heater is to simply pull the old one out and measure. If you have an integrated anode rod and drain then you likely need the Camco RV Water Heater Anode Rod w/ Drain part # CAM11533 which is designed for Atwood water heaters. If you just have a standalone anode then the Camco RV Water Heater Anode Rod part # CAM11563 is another popular option which is used on Subruban water heaters. view full answer...
Since your 2022 KZ Durango D311BHD has a 13k GVWR and has a Lippert 1116 style pin box on it currently the correct MORryde Cushioned Pin Box fit would be the # MR77VR which is correct fit and weight capacity. This will fit great and will do a great job making your ride quality smoother. view full answer...
Thanks for the information! I just spoke with my rep at Lippert. Your 2018 K-Z Durango Gold 5th Wheel trailer has a 1621 pin box. You will want the Reese Goose Box item # RP85FR.
You will also need the Tow Ready Safety Chain Kit with Clevis Hooks item # 49150. None of the 5th wheel to gooseneck converters come with the required safety chains. view full answer...
The lube plate you mentioned is a 12 inch lube plate, and B&W recommends a 10 inch lube plate for the Patriot, so I recommend the following:
- Lube Plate for Reese 5th Wheel Trailer Hitches - 10" Diameter # RP83002
The # RP83002 will indeed stay on the king pin without any other accessories or parts. view full answer...
Good question! The etrailer Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall part # JF-1005H-Z is the perfect drop leg for your jack. The Lippert Components electric jack use a 2" inner tube diameter and that is specifically what this drop leg is designed for. I've included the video I did on it here at etrailer below to give you an example of installation. You may need to raise the front of your trailer or remove the jack (just the mount not the wiring) for it to slide in to the... view full answer...
While we currently do not have the Nova style of slam latches we do offer a more generic looking style with the Global Link RV Baggage Door Slam Latch with Keyed Alike Option # 295-000015 along with the backing plate # 295-000016.
This slam latch requires a cutout hole 3-1/2" x 3-1/2" in size so you may need make alterations to make this fit. view full answer...
Yes, If you have the the Equa-Flex system already installed on your 2015 KZ Durango Gold with 7000# axle, the Lippert Tandem Axle Equa-Flex W/ Wet Bolts - 3-1/8" Long Shackles # LC64FR are a great choice; this will work as long as they match closely to the length you currently have installed. Please measure this point to ensure that the 3-1/8" length matches. This is designed to work with Equa-Flex equalizers rated between 3,000-lbs and 8,000-lbs. I have attached a link to a review of... view full answer...
The Optronics Flexible LED Light Strip # UCL90CB is definitely 3/8" wide so it will be too wide for your awning, but you could still clean the side of your camper and mount this directly to the wall if you wish, that way you can use it without having to completely open up your awning.
I looked at some of our other options and they look to be too large as well so we don't have anything that will be a direct replacement for that channel in your Carefree awning tube. view full answer...
Thanks for the photo!
The Goal Zero Boulder 200 Briefcase Solar Panel # 287-32409 uses a specialized connector that is different from what you have pictures but we have the Go Power Portable Solar Panel with Digital Solar Controller - 200 Watt Solar Panel # 34282610 that comes with an adapter to fit that inlet.
A lot of the newer solar panel systems are from Go Power so odds are your trailer is setup with this same brand. This is a plus because this portable kit uses a PWM charger which... view full answer...
You're typically going to need a tire like the Karrier ST235/80R16 Radial Trailer Tire - Load Range E # AM10248 to pair with the # AM20757, which have a section width of 9.25". If you can provide the overall size of the tire, I can provide better direction on this but typically a tire with a 6.5" section width will not fit on this wheel. view full answer...
I can tell you how to easily determine the correct over/under conversion kit for your 2017 K-Z Sportsmen Classic 180THT, though we would not be able to verify a specific fit for any trailer. It's easy to determine the correct over/under lift kit though because all you have to do is measure the diameter of your trailer's axle.
- 2-3/8" Round Axle: Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00
- 3" Round Axle: Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00
I... view full answer...
All you need to do is measure the shackle strap length on your toy hauler to find the correct wet bolt kit. You'll want the shackle straps to be the same length (or as close to it as possible), and there are two options for that:
- MORryde Suspension Upgrade Kit for Triple Axle Trailers - 3-1/8" Long Shackle Straps # MR26ZR
- MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps # MR86ZR view full answer...
The Torflex Lift Kit - Tandem Axle - 3-1/8" Lift # K71-725-02 is designed for a #12 Torflex Axle. What you have here is a spring axle.
In order to lift your trailer I recommend the Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00. This kit allows you to move your double-eye leaf springs to the top of the axle providing you with the lift you're looking for. I have attached a review video for your reference. view full answer...
To get the best performance out a weight distribution hitch you'll want to first know your trailer's fully loaded tongue weight. Once you're fully loaded you could use a tongue weight scale like the # e99044 to get an accurate number to work with. Most likely you'll fall around the 400lb range.
If you're experiencing a minor amount of sway then I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-0450. This system has two friction points (where the frame brackets... view full answer...
To find the correct replacement landing gear set for your 2014 K-Z Inferno you'll need to make sure that it has enough capacity to handle at least 25% of the trailer's GVWR and then check the measurements for the weld-stops to see if you can reuse your current mounting brackets instead of cutting them off and welding on new ones. For the spacing you'll want to measure the distance from the bottom of the upper weld stop to the top of lower weld stop and the distance from top of the upper... view full answer...
I took a look at the weight of your 2019 K-Z Sportsmen Classic 160QB trailer, and based on that you will likely be able to use the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00.
I say "likely" because this kit is designed for 2-3/8" diameter axles, which your trailer probably has, but we don't have any way of knowing that so you'll need to take a measurement just to be certain.
As for welding, it is a good idea to have the spring pads tack welded on in order to prevent... view full answer...
If you're wanting to just replace the converter and leave keep the AC/DC distribution panels then you can use the Progressive Dynamics # PD9160ALV. This converter will plug into a dedicated outlet for easy installation. It has a 60 amp rating so you'll want to ensure that your current cables connecting to the battery are a thick enough gauge. The built-in charge wizard detects the battery charge level and adjusts the charge being sent out accordingly.
If you're wanting to replace the... view full answer...
If your 2018 KZ Sportsmen Classic 130RB travel trailer is prewired for a Furrion camera then yes, the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS05TASF will work perfectly with it! The part FOS48TA-BL you referenced is the camera system that Furrion just updated to the FOS05TASF and the connections/mounting brackets are interchangeable.
One of the best things about the 5" screen option that you are looking at is the ability to add the Marker Light RV Side Cameras... view full answer...
You have to cut off the old valves when replacing them like with the Double RV Waste Valves - Sanitation Tee - Rotating # T18A since the solvent used to install the valves creates a permanent connection. For solvent to install the new valves we have the Valterra ABS Solvent Cement # A05-0303. view full answer...
From what I found online, your 2020 KZ Sportsmen Classic 181BH has a 3500 lb capacity axle, which has an axle beam that's typically 2-3/8 inches in diameter. If that's the case, the Dexter # K71-384-00 Over/Under conversion kit will allow you to move the spring pack to the top of the axle for greater ground clearance. You'll gain about the 2-3/8 inch diameter of the axle beam plus the thickness of the spring pack in height. view full answer...
Go To Results