The Swagman XTC4 4-Bike Rack # S64665 and Hollywood Racks Destination 4-Bike Rack # HR4000 are two of the best values in regards to 4-bike racks, and when taking everything into consideration I highly recommend the Destination # HR4000.
There are a number of reasons for this, starting with the fact that the Destination is going to be easier to load your bikes on because of its large and curved wheel trays compared to the hoops of the XTC-4 that make you plop the bikes in just right. The... view full answer...
While both of these racks are great options, the Kuat NV 2.0 # NV22B-NA22B does not provide the weight capacity you need for your 60-pound e-bike when 4 bikes are loaded. This is because the weight capacity reduces to 50 pounds per bike with 3 bikes and 40 pounds per bike for 4 bikes.
For this reason, I strongly recommend going with the Saris SuperClamp EX Bike Rack for 4 Bikes - 2" Hitches # SA4026F. Not only will you receive the weight capacity you need when your e-bike is mounted in... view full answer...
The Wiring Harness part # 46255 is confirmed to fit your 2002 Lexus ES 300. This will work well for you.
I have attached a sample install video for you as well. view full answer...
Since the Inno roof rack (parts hyperlinked below) can be mounted at varying locations on the flush rails of your 2018 Lexus GX 460 I recommend going with that system. It has a lower weight capacity at 140 lbs (as opposed to 165 lbs from Yakima) but in my experience most people don't plan on max-ing out the weight capacity of their roof rack so the benefit of adjustability will out-weigh (no pun intended) the higher weight capacity of the Yakima system.
Here are the parts for the Inno... view full answer...
Both the Firestone Level Command II with Standard Duty Compressor part # F2158 and the Firestone Level Command II with Heavy Duty Compressor part # F2219 would technically work with the Firestone Air Bag Kit part # F2535 that you have installed on your vehicle.
The biggest difference is that the heavy duty compressor will inflate much quicker. view full answer...
For your 2017 Lexus NX, the best bike rack for you is going to depend on the type of bikes you have and how often you plan to carry them. Both the Kuat Transfer 2 part # KU74FR and the Yakima HoldUp 2 part # Y02443 are excellent bike racks that will work well for you.
However, I recommend the Yakima HoldUp as it has a bit more features that will work with your bikes and vehicle better than the Kuat Transfer will. For starters, the HoldUp can carry bikes weighing up to 60 lbs each whereas... view full answer...
The three hitch options for your 2007 Lexus RX 350 - etrailer # e98857, Curt # 13530 and Draw-Tite # 75153 - all share identical capacities and will install in the same way. All include the mounting hardware.
From these choices my preference is the etrailer model # E98857 you referenced. I like this one because it is USA-made and has a subtle matte finish powder coat rather than a high gloss finish, so it will not distract as much from the car's own appearance. Please check out the photo... view full answer...
There is not a Class IV trailer hitch for the 2018 Lexus GX 460. Curt and Draw-Tite only make the Class III.
I recommend the Curt, part # C13043. It has a gross tongue weight of 500 pounds and a max towing capacity of 5000 pounds.
I've linked to a video installation of this hitch for you to look at. view full answer...
The best snow tire chains for your vehicle with 235/55R19 tires are the Konig Self-Tensioning Snow Tire Chains # TH01594250.
There a few reasons why these are the best chains, starting with how easy they are to install, which is important because the less time you have to spend out in the cold winter weather (and potentially on the side of the road), the better. To install the Konig chains, drape them around your tires and loop the cables together; you only need to drive off and they... view full answer...
The Thule Apex 4 Bike Rack for 1-1/4" and 2" Hitches has been discontinued by the manufacturer. The most similar option that I recommend as an alternative is the Yakima RidgeBack 4 Bike Rack - 1-1/4" and 2" Hitches - Tilting # Y02458. The tilting racks do bring the outermost bike too close to the ground when tilting, so it is not recommended to tilt with bikes in place. If that is a concern you may want to go with the swing away model which will keep the bikes vertical and loaded. I've... view full answer...
Both the Draw-Tite # 36336 and the Curt # C12339 will essentially have the same ground clearance. When we installed the Curt option on a 2005 Toyota Camry we found the distance from the ground to the top of the inside of the receiver opening to measure 11-1/2". When we installed the Draw-Tite option on a 2006 Camry we found that same measurement to be 11-3/4". This difference could very well have to do with differences in the tire inflation or cargo in the rear of the vehicle as well so... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13337 and Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75956 are both confirmed to fit your 2019 Lexus NX 300. Both offer very similar fitment and we have not had the pleasure of testing both of these receivers on the 2019 Lexus NX 300 so it is difficult to say which one would offer more ground clearance.
That said, we have been able to test the Curt on this vehicle and we measured 12-1/2" from... view full answer...
Both the Curt # C56268 and T-One # 118652 wiring harness are designed to work with your 2017 Lexus NX Turbo.
The difference between the two harnesses is that the T-One maximum amperage draw is 2.1 amps for stop/turn lights and 7.5 amps for tail lights. For the Curt harness the maximum amperage draw is 3.0 for stop/turn lights and 6.0 for tail lights. view full answer...
For heavier e-bikes like yours there are two frontrunners for bike racks to consider with the Thule EasyFold XT part # TH903202 and the Yakima OnRamp part # Y36FR. What sets these apart from others is they both have ramps to make loading and unloading bikes easier since e-bikes are heavy.
The EasyFold folds down into a smaller size when not in use which helps for garage storage but the OnRamp is 6 lbs lighter at 39 lbs compared to 45. That's how I'd pick if I were you. Which would you... view full answer...
I can help compare the # C55245 and the # 118245.
These two wiring harnesses are designed to do the same job for wiring up your 2001 Lexus LX-470 the only real difference is the manufacture that they are distributed from. The # 118245 is designed and distributed by Tow Ready a company owned by Cequent Manufacturing and the # C55245 is designed and distributed by Curt Manufacturing.
Both harnesses plug in the same way and provide a 4 pole connector for your vehicle end. For your vehicle... view full answer...
According to our friends at Curt Manufacturing, part # C59236 is the correct wiring harness for your Lexus. The # 56201 is designed to be used with a multiplex wiring system like those found on some newer vehicles, and would not work correctly with your Lexus.
The harness would install as follows. The included circuit tester is used to test the circuits in the wiring harnesses that feed the rear tail light assemblies. As each lighting function is activated, use the tester to test each... view full answer...
The Demco Hijacker Autoslide part # DM8550024 and B&W Companion Slider part # BWRVK3370 are both excellent options. In regards to weight, the B&W Companion Slider is lighter at 260 lbs than the Demco Hijacker Autoslide at 300 lbs. The B&W Companion Slider can be broken down into two pieces; the head which weighs around 70 lbs and the base which weighs around 190 lbs. The Demco Hijacker Autoslide can be broken down into three pieces, the head which weighs around 60 lbs, the side brackets... view full answer...
The Curt Trailer Hitch Receiver # C13394 is a confirmed fit for your 2019 Lexus RX 350 L and will not require a support strap on your Lexus. The Curt # C13394 is a good looking option as it has the concealed crossbar. If you are only using the receiver for a Bike Rack # BA22B then it is more than enough with a tongue weight capacity of 500lbs and trailer capacity of 5,000lbs. Be sure to verify any capacities for your specific Lexus with a dealer to not exceed the lower of the 2 number... view full answer...
Both Curt hitches that fit your 2018 Lexus NX 300, the 1-1/4-inch Class II # C12172 and the 2-inch Class III # C13337, use common mounting points on the vehicle's frame.
So as far as the installed appearance goes, there will not be very much difference between the two. Both hitches' cross tubes are visible. To my eye neither offers a compelling cosmetic advantage over the other so I still recommend the 2-inch model # C13337 shown in the linked photo and installation video.
These differ... view full answer...
The definitive way to determine if your 2010 Lexus RX 350 has a factory tow package would be to have a Lexus dealer run the VIN number. They will be able to tell you what options the vehicle has.
You could also test the factory connection point for # 56083 or # 118252, see instructions, to see if there is power to the factory plug. However, it may show that it works because it is not under load (a trailer connected). But under load, if you do not have the complete tow package and use #... view full answer...
Go To Results