Hi Todd; it will likely work with your Yukon XL but you will have to mock it up/measure to see. Also, it may limit the turning radius depending on your trailer and the exact bike rack you have. We don't have a way of knowing this without measuring or directly testing it.
The distance from the top of the A-frame to the top of the Stromberg Carlson Bike Bunk Bike Rack # CC-275 is 33-1/2". Measure 33-1/2" up from the point you plan to mount it and you will see where it sits on the trailer.... view full answer...
Hello Will, thanks for getting in touch. The bottom cut out on the Replacement Foam Blocks for Malone Free Standing Kayak Storage Rack # MPG339 are 1-1/4" wide. view full answer...
Hey Robert,
I ran out to our warehouse to get that measurement for you. From the pin holt to the end of the hitch on the Draw-Tite # DT58KV it is 2-1/2". I attached a photo for you as well to show where I measured.
What Thule bike rack are you using? view full answer...
Hey Tom!
The overall dimensions of the MORryde RV Cargo Sliding Tray - 48" x 42" # MR73FR are 48" long x 42" wide x 6-5/8" tall (see attached) - this is for the tray and the rails when they are assembled and installed together.
Since this is a bit longer than what works for you I recommend picking up the Rail Kit for Kwikee SuperSlide II RV Storage Slide Out Tray Assembly # LC370782 and pairing it with the Tray Trim Kit # LC370690 which gives you more of a custom setup that will fit within... view full answer...
Hey Frank! I'm not sure why Yakima wouldn't commit to that but you can definitely use their JetStream bars with the Thule Hullavator Pro # TH898. The problem with the Thule crossbars is that the mounting channel underneath doesn't run the full length of the bar, so longer crossbars aren't always possible depending on where the feet sit. This is not a problem for Yakima.
The Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars # Y36KB is confirmed to fit your X5 50e. With the... view full answer...
Hey, Chris. Thanks for reaching out.
On the Stealth Hitches Hidden Trailer Hitch Receiver with Towing Kit # SH32TR, the ball mount sits right around 15" off the ground. That measurement is taken from the top of the ball mount platform down to the ground.
That number comes from an install we did on a 2025 BMW X5, and there isn’t any noticeable difference in ride height between the 2024 X5 M Sport Package and the 2025 model, so you can expect to be right around that same height.
What... view full answer...
Hello Matias, thanks for reaching out. Once installed, the Stealth Hitches Hidden Rack Receiver # SH46FR will add approximately 38 lbs to your 2024 BMW X3.
The shipping dimensions are 40" x 12" x 8".
What will you be using the hitch for? view full answer...
Hi Hester,
The Curt Rack Receiver part # C87NR weighs just under 25lbs and is designed to be used only with hitch mounted bike racks and accessories. It has a tongue weight of 150lbs to support most bike racks and bikes, but if you're looking to carry two e-bikes, their weight plus the bike rack's weight may be pushing the hitches limits.
As far as range goes, since the hitch is relatively light it should have very little impact on your miles per gallon (mpg) when driving normally and... view full answer...
Go To Results