That is not normal wear for the L-Brackets on your Blue 2-Point # BLU75FR to be that worn. It looks like you have too much angle in the head, so I recommend trying to tilt the L-brackets a little to try and get the bar less on just that one edge, and verify your system is rated correctly for your trailer.
The tilting of the head is used to add tension to the spring bars so it's possible your spring bars are underrated for the tongue weight your using it for.
With all of that said for... view full answer...
Thank you for providing that information. What you need is the Replacement Motor for Kwikee Electric RV Steps # LC379147. This will replace the motor you have now and get your steps up and running again. view full answer...
I have a solution for you, but as mentioned in the previous answer a universal replacement ladder like the Stromberg Carlson RV Exterior Ladder # LA-401 may not reach as far forward as the factory ladder on your 2017 Thor Freedom Elite Motorhome.
A ladder that provides more forward reach than the # LA-401 is the Surco Universal Exterior RV Ladder # SP501L , which has 17" from the ladder to the brackets that mount on to your roof-compared to the approximately 9" on the LA-401. This is going... view full answer...
The Triple LED Trailer Tail Light # CE44VR does appear to be the same one that came on your 2018 Thor Chateau 31W. I do always recommend verifying replacement parts with your originals as I have personally seen identical campers have different parts installed from the factory due to shortages.
This light is 14" long, 6-7/8" tall, and 1" deep. The mounting holes are in a 13" by 5-7/8" rectangle. I have linked an image with these dimensions marked.
Hardware is not included as different... view full answer...
I spoke to a representative from Wiper Technologies today. The Wiper Technologies J Hook Windshield Wiper Blade - Frame Style - 28" - Qty 1, part # WPR96FR, you attached to your question is one of the models that may fit your 2017 Thor Vegas Motorhome. It comes with a 12mm j-hook. If you need the longer option, 32", it is part # WPR46FR.
I have included a product description link and a video review link below. view full answer...
Yes, we do carry water pumps that can be used to replace your Shurflo 4008-101-A65 water pump.
After looking at the specifications of the Shurflo 4008-101-A65, I recommend replacing it with the HydroMax RV Fresh Water Pump # P25201. The HydroMax RV Fresh Water Pump # P25201 is a 12v DC pump like your Shurflo and has the same 3 gallons per minute flow rate and pressure of 55 psi. view full answer...
We do have compatible replacements for your discontinued Jensen VR209TP, but none are plug and play and you will lose your current camera functionality. The Furrion RV Stereo w/ DVD Player # DV1230BL has similar dimensions so it should make for an easy installation.
This features Bluetooth capability for hands-free calling and has 3 zone outputs. It also comes with 1 USB, 2 RCA inputs, 1 RCA output, 1 headphone, 1 auxiliary, 2 HDMI, and 1 subwoofer terminal so you will be able to connect... view full answer...
There's no guide that tell us the part number for your screen door's slider so you would need to measure the spacing of the track in order to determine the correct slider replacement. If there was a part number on the slider then Dexter could most likely tells us what the replacement is, but these typically come with nothing on them so measuring is likely going to be the only option. You could also try reaching out to Thor to see if they have a parts catalog and could give you the correct... view full answer...
In order to get you the correct wiper seal for your 2017 Thor Four Winds 31W you're going to have to remove some of your current seal so you can measure the length as well as the side profile of the seal. Once we know these dimensions I can recommend a replacement that matches what you have.
For example, the Rubber Wiper Seal # SR98FR you looked at measures 15' Long x 3-3/16" Wide and is bulb style with a stick on application.
Attached is a review video for you to check out as well as... view full answer...
We offer the 2-Wire RV Propane Gas and Carbon Monoxide Detector in black, # RS54FR or white, # RS34FR.
RV Propane Gas and Carbon Monoxide Detectors are a fairly universal item and easily replaced. The additional face plates that come with the unit allow retrofit to most all situations. The Atwood 31013 is no longer made, its cutout size is 3-9/16" long x 3-7/16" wide. So the above options will work and the plates will allow it to be dressed out for a clean finished look.
Please note... view full answer...
For your Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan # V3094-603-00C, the correct replacement motor is going to be the:
-Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans # BVD0218-00. view full answer...
The easiest solution to upgrade your WFCO model WF-8955PEC converter is to use the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp, part # PD4655V.
This is a direct replacement for the converter/lower unit, so you would not need to replace your entire box and since it's designed to replace your WFCO converter, it shares the same dimensions and will fit in the exact same place as the old one. Installation is pretty straight forward, you'll need to unscrew and... view full answer...
In order to rebuild the gears inside your landing gear legs you'll need the Lippert Components Venture Repair Kit for 5th Wheel RV Landing Gear part # LC146060 for follow leg or part # LC146059 for lead leg. view full answer...
The VD0434 number that you mentioned is actually the screen part number on your Ventline fan. Knowing that, the replacement motor should be the Ventline part # BVD0218-00 which is for Ventline, Ventadome, and Vanair Fans. If you are replacing this on an older unit then you also need the Fan Blade # BVD0215-00.
The replacement motor # BVD0278-00 that you referenced is actually a replacement for a Ventline range hood like what you would have in your kitchen.
If you are unsure of what your... view full answer...
Here is a list of the Jensen radio antennas we currently carry. You can compare these with the one on the roof of your 2016 Thor Challenger 37LX to determine if we have an exact replacement or if you will need to remove the antenna from your roof to install a new antenna. Most all radio antennas will use the same style connector going into the stereo if you replace the antenna cable as well.
Jensen Antenna - Top or Side Mount - Rubber Mast # 44US01R
Jensen Antenna - Rooftop or Side Mount... view full answer...
Sounds like you are looking for a replacement breaker for your Lippert stabilizer jacks # LC369774 which we have with the part # LC134181. view full answer...
We do have a gas strut that matches what you're looking for. The JR Products # 372-5000-20 has 20 lbs of force with a 10" extended length and attaches to 10-mm ball studs. view full answer...
While we do not have the ability to pull build sheets from the OEM to identify what part was installed, I think you may have the Lippert Kwikee 28 Series Electric Step # LC3747452. This is a great single step option that is extremely popular as an OEM application.
This step has mounting bracket dimensions of 24-1/4" wide x 5-7/8" tall x 8-9/16" deep (see attached images). Please verify this against what is currently installed on your 2017 Thor Hurricane Motorhome. If your current mounting... view full answer...
Based on the pictures I was able to find online that must be 7.5" tall x 5" wide on your 2015 Thor Majestic. Typically when you find a replacement you want to measure the existing cutout to see what would fit.
You might be able to use the Bauer Products Rotary Latch # BA85FR. This requires a 6" tall x 4" wide cutout and has similar dimensions on the face of the latch at 7.9" tall x 5.7" wide. If you have a different cutout size please let me know and I will see if another option is available. view full answer...
There is no guide available for consumers to be able to know what slide out motors are on their RV so the only way to know would be to contact the RV manufacturer or extend your slide out and get under it to take a look at the motor. There will typically be one motor per slide out and each motor will be made up of two components; the motor and the gearbox.
Both of these components should have a tag on them with some sort of identification so that we can determine what they are and find... view full answer...
Go To Results