The Replacement Anti-Wear Shoe Assembly part # 3371303300 for 6" or part # 3371303305 for 7" should fit the Fishers XV2 Snow Plow. However, you will need to confirm this by making sure the post diameter of 1.32" will work for you. I have attached a photo for you with some other measurements to assist as well. view full answer...
We have one seat cover that will fit your 2013 Polaris Ranger 500 EFI Mid-Size Crew. It is the Classic Accessories UTV Seat Cover, Polaris - Black, part # 052963783773. This is the only option we have that will provide a tight fit for your Ranger 500 Mid-Size Crew.
I have included a video review link below. view full answer...
The Classic Accessories ATV-UTV Seat Cover Set for the Polaris Ranger that you referenced, part # 052963783773, is a confirmed fit for your 2013 Polaris Ranger 500 as long as it is not the XP or HD model. This washable black fabric/pvc cover set includes two seat covers and two headrest covers. view full answer...
The Classic Accessories UTV Seat Cover # 052963783773 are designed to fit your 2012 Polaris Ranger 500. The Classic Accessories Quick-Fit UTV Bench Seat Cover # CA18026 you found is for the XP and HD Ranger models. view full answer...
Yes, I checked with Classic Accessories and seat cover # 052963783773 will fit your 2006 Polaris Ranger 500. It is designed to fit 2002 to 2008 Rangers. view full answer...
If you don't have a roof on your Polaris Ranger I suggest using the Malone Rack Pads # MPG314 to wrap around your roll cage. Then get the load extender # Y01149 to hold up the rear of the kayak. IF you do have a roof I suggest getting something like these saddle style carrier # RR581 and drill a hole in your roof and put the T-Slot through the hole and tighten it down. view full answer...
According to Bulldog winch, they are fairly positive that the # BDW15159 would work with your OEM optional bumper, as shown in the diagram I provided. It looks like the mount wold attach so that the bottom of the winch would sit about halfway up the radiator opening, right atop that horizontal bar at the top of the bumper. You'll want to look at the trim pieces alongside the radiator grill to see if the mounting holes shown in the diagram are present. I was unable to see enough in the photo... view full answer...
For your tires, I recommend going with the Erickson Wheel Net, # 77314. This wheel net will accommodate your front and rear tires and they will have more than enough capacity to hold your RZR to the E-track system on your trailer.
Another items that we've found very helpful when loading ATVs and UTVs is the Erickson E-Chock, # EM09162-2. I typically try to park the UTV in the same spot over the axles to make sure I have the correct weight distribution on the trailer and these chocks make... view full answer...
For your 2015 Polaris Ranger 900 crew cab we have the Classic Accessories UTV Seat Cover # 052963783773 that you referenced as a confirmed fit in the color black, but we do not have any other colors. This does fit your seat style though. view full answer...
RV makers don't keep track of items such as the door railings that they install on their trailers but since the Lend-a-Hand Extra Large Folding Grab Handle # AM-533 can fold in either direction it should work great for your Grand Design 385TH toy hauler. The distance between the mounting brackets is 19-1/4-inches so you can compare this to your handle mounts. If you cannot find a door stud for mounting you can locally source long bolts and a plate to provide a secure mounting point. Four... view full answer...
For your 2004 Polaris 500 Sportsman HO with the Superwinch Winch LT3000, I recommend the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15159. This is a custom-fit part designed for your ATV frame. It will be compatible with many winch brand options, so if you haven't yet purchased a winch I recommend the Bulldog Winch Powersports Series ATV Winch - Wire Rope - Roller Fairlead - 3,000 lbs # BDW15002 which is very comparable and is very popular with our customers. I've attached a... view full answer...
Yes it will! I can confirm that the correct Bulldog Winch mount for your 1999 Polaris Sportsman 500 ATV is in fact the one you mentioned, the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15102. view full answer...
The Superwinch X3 Series Winches use a rather uncommon mounting pattern of two holes spaced 3.69" apart. Therefore, you'll likely haver to drill through the mounting plate in order to secure it. You can use any winch tray such as the Bulldog Winch ATV Winch Mounting Plate for 2" Hitches part # BDW20061R2 so long as you are okay with drilling. view full answer...
I have a great tire chain solution for your ATV. Unfortunately, the Titan Chain Snow Tire Chains w/ Cams - Ladder Pattern - V-Bar Link # TC2816CAM will not fit your 26x8x12 ATV tires.
However, for a great alternative that will fit, I recommend the Titan Chain Snow Tire Chains - Ladder Pattern - V-Bar Link # TCATV3-4. These chains have the same V-bar studs as the # TC2816CAM for excellent traction in deep snow and ice. To make installation and tightening easier, I recommend the tensioners... view full answer...
Yes, the Classic Accessories Quick-Fit UTV Bench Seat Cover # CA181420 will fit your 2018 Polaris Ranger 570 just fine. Attached is a review video of this kit on a 2015 Polaris Ranger for you to check out. view full answer...
Yes the Extang Solid Fold 2.0 Hard Tonneau Cover for UTV - Folding - Polypropylene - Matte Black part # EX83110 is a fit for the 2019 Polaris Ranger 1000 Northstar edition according to Extang.
The Extang Solid Fold 2.0 Hard Tonneau Cover for UTV is designed to keep the cargo in the back of the Polaris covered however, it is not completely leak proof. I do not recommend to put really sensitive items in the back but it does give you a place to store your cargo that is covered. view full answer...
I spoke to the tech at Bulldog Winch and the Bulldog Winch Powersports Series ATV Winch part # BDW15001 power unit 18" wire and 6' wire can be switched but you would need to open up the power unit box and actually switch the wires in the circuits and not just wire them switched. Bulldog has had a lot of issues where customers have switched the wires and burned out the relays and wiring inside the power unit.
The 2 relays can be replaced with part # BDW20101 but the wiring will most likely... view full answer...
Go To Results