Yes, the Advent AC unit part # ACDOM150 that you referenced will work great as a replacement for a Dometic Duo Therm unit like you have. We had a customer come back and tell us how well this worked as a replacement for a Duo Therm and that no modifications were needed. view full answer...
No, you don't want to put Kilz down. The adhesive for the LaSalle Bristol RV Roof Replacement Kit w/ XTRM Membrane item # 344270KIT35 won't stick to the primer. It needs the bare wood. The item # 344270KIT35 install kit comes with everything you need to install the membrane.
If you need anything else don't hesitate to reach out in the comments below. view full answer...
Based on your description it sounds like you need a replacement motor for your landing gear. The correct replacement for your 1RV-200 is the # LC142178. If you need a replacement gear box as well then you can use the # LC276602. view full answer...
Hey Joey, thanks for reaching out!
It sounds like you have Coleman-Mach AC units that you're wanting to replace on your Nu-Wa 5th wheel. For that I recommend 2 of the 15K Btu Advent Air Low Profile RV Air Conditioner for Coleman Setup # ASA76YR. This AC has a wiring adapter to match right up to your current wiring plug, and it comes with a start capacitor so it won't draw as much power on the startup.
Let me know if you have any other questions! view full answer...
You can replace the Atwood RV Water Heater AT94022 with the Furrion RV Tankless Water Heater # FR93FR, so long as you have the needed space. According to the instructions, which I have linked for you below, this Furrion unit simply requires the opening to be 12-5/8” tall, 12-13/16” wide, and at least 23-1/2" deep.
The Atwood # AT94022 measures 16" tall, 15-1/2" wide, and 20-7/8" deep, so it is taller and wider, so you should have the space; the Atwood also uses a 17-3/4" tall x 18" wide... view full answer...
To get right seal you'll need to remove a portion of the seal to get the side profile of your current seal. There are multiple types of applications for slide-out seals; Glue On, Peel-N-Stick, Press In, Push On, and Slide-On. There are multiple styles and measurements the seals; some come with a bulb, some don't.
For example the Rubber Wiper Seal and Bulb for RV Slide Out - Stick On - 60' Long x 3-3/16" Wide # SR68FR you were looking at will come with the bulb and is a press on design... view full answer...
We don't have a way of knowing exactly what slide-out systems were installed on individual coaches, but as long as your 2007 NuWa Hitchhiker II has an LCI (Lippert) slide-out system on it, then you will want to use the Lippert Replacement Hydraulic Cylinder for RV Slide-Out # LC354176 as your replacement. If you find out that you've got something different there and can find a part number or send a photo, we can help you locate an appropriate replacement. view full answer...
You are going to need to replace your vent with the Fan-Tastic Vent Roof Vent # FV807350 on your 2012 NuWa Discover America Fifth Wheel. This is the only way to get the 7350 fan you are wanting. The Roof Vent Installation Kit # 344270KITW will provide you with the sealants and new hardware needed to install the new vent in your roof.
The Fan-Tastic Vent 7350 Series Upgrade Kit # FV807359 will only work on 730 series fans and not your Create-A-Breeze B8100.
The Fan-Tastic Vent Ultra... view full answer...
The Nev-R-Lube style bearings aren't designed to ever need maintenance. They have a 100,000 mile warranty and if they ever failed it would be just a matter of replacing them. LIke with the # 31-71-3 for if you have a 8,000 lb axle.
Checking the brakes is just a matter of removing the spindle nut and sliding the hub/drum off so that you can inspect the drum and the brake assemblies. view full answer...
The Empire Faucets Stainless Steel RV Kitchen Faucet w/ Gooseneck Spout - Single Handle - Brushed Nickel # EM54JR stands 14-3/4" tall from the base to the top of the faucet spout. view full answer...
The Lynx # 274-000006 wheel you're interested in uses a 9/16-18 60° coned lug nut like # 6-53 or # LHLR110, as confirmed by LionsHead. view full answer...
If you have a 7-Way and junction box setup on your the trailer your easiest route will be to just replace the junction box with something like the Epicord 7-Way # 277-000141. This harness features a 7-Way molded plug and pre-wired junction box with terminals so that you can simply make connections to what remains of your trailer wiring after removing the connector.
I have attached an installation video so you can see exactly how everything hooks up. The wire color/functions for the harness... view full answer...
From previous customers of ours who had a 2006 Nuwa HitchHiker we know that the pin box type you have now is the 1716 model so for a cushioned pin box you would want the MORryde part # MR37VR. The weight range this pin box is designed to work with matches the GVWR of your fifth wheel I found online as well. I know you said you wanted an air ride pin box but we don't have any air ride style pin boxes that fit your RV and the MORryde is known to do an excellent job cushioning the ride quality... view full answer...
For a 7,000 lb axle with a hub such as Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ you need Inner Bearing # 25580, Inner Race # 25520, Outer Bearing # 14125A and Outer Race # 14276. You will also need Grease Seal # GS-2125DL (2.125" inner diameter) or # GS-2250DL (2.250" inner diameter) though the only way to know this for certain is to check the part number on the seal itself or use digital caliper to measure your spindle where the seal rides.
A press isn't necessary for installation,... view full answer...
I won't be able to confirm the correct landing gear set for a trailer based on the make/model nor by cross referencing any part numbers but most are fairly standard and it's super easy to confirm this yourself. The Landing Gear Set part # RVLG-8000 is a very popular option that fits most trailers. In order to confirm it fits your particular application you''ll need to measure the distance between the weld stops on the existing legs and ensure they are 15-1/2". view full answer...
I have a solution for you, but the Ultra-Fab 2" Motor Home Trailer Hitch Receiver part # UF35-946401 will only fit bumpers up to 4" x 4" .
For your 4-1/4" x 4" bumper, I recommend the Buyers Products RV Bumper Receiver Hitch item # 337RVA24. The u-bolts will actually fit bumpers up to 4-1/2" wide so your 4-1/4" wide bumper won't be an issue. The fit will be tight enough that you would not have any play.
It's perfect for a bike rack, cargo carrier, or any other cargo accessory. Keep... view full answer...
If the landing gear is electrically operated and the motor makes noise but the legs do not move then it could just be that the battery does not have enough charge to run the landing gear. You can have the battery tested at an auto parts store. If the battery is fine and the motor makes no noise then you may just need to replace the switch.
If you did raise the jacks too high then it could have damaged the threads on the screw and nut which would mean that you would need to replace the... view full answer...
The Replacement Lead Jack w/ Drop Leg # LG-179013 will work based on the helpful measurements you have given. The leg length is also 29-1/2" with a distance from the top to the closest weld stop measuring 6-3/4" and from the bottom to the closest weld stop measuring 5-1/4" These have a weight capacity of 4,000 lbs and have mounting locations for a motor.
I have attached a diagram showing the measurements as well as a review video for your reference. view full answer...
Go To Results