Hey Joseph,
This soft start, # SSR64FR, is great for running an AC unit on either a 30 amp or 50 amp hookup. So you are going to be able to do just what you are wanting. This soft start is going to reduce the startup current by 50% which is why it is great especially for running both 13,500-15,000 AC units.
What trailer or RV do you have these AC units on? view full answer...
Hello Gary. It looks like the Curt Class 3 Hitch # C37RV for the 2024 Hyundai Santa Fe is still in production. As of right now (4/19/24) we are expecting them to be available by early-mid July. They are currently available for pre-order if you want to get your name on the waiting list. The 2023 model did use the same hitch for hybrid and non-hybrid models and this SHOULD be the case for the 2024 models, although this has not yet been confirmed by the manufacturer. We will know for sure... view full answer...
Hi Alex; the gauge on the Big Truck Big RV Tongue Weight Scale for Trailers # BTBRV004 has a +/- 5% full scale accuracy and displays weight in 20-lb increments up to 1,000 lbs. We also have it available with a SnapPad # BTBRV99FR.
What will you be using the scale for? view full answer...
Hey Eric,
Do you only have the OneControl touchscreen inside your trailer or do you also have a separate controller on the outside or in an exterior compartment? You should have a controller that looks like either the # LC421484 or # LC74FR. If not can you send me a picture of the control module you currently have and any part/serial numbers it has listed on it? view full answer...
Hey Brian, thanks for reaching out. We do offer TorkLift frame mounter camper tie downs for your 2024 Ram 3500 6.4' bed with cab length steps. You will need the following:
- TorkLift Camper Tie-Downs - Custom Frame Mount - Front # TLD2141
-TorkLift Camper Tie-Downs - Custom Frame Mount - Rear # TLD3112
Keep in mind that dually trucks may require the TorkLift Camper Anchor Relocation Kit # TLA7004. Also, these tie downs will not fit vehicles with aftermarket rear mounted Mopar kick-out... view full answer...
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item # e99011.
Here are the individual functions of that Lance 6-pin:
Black Wire: 8 Gauge, 12-volt power
White Wire: 8 Gauge, Ground (-)
Green Wire: 14 Gauge, Running Lights
Red Wire: 16 Gauge, Left Turn Signal
Brown Wire: 16 Gauge, Right Turn Signal
Yellow Wire: 16 Gauge, Back-up Lights view full answer...
The Dexter Trailer Hub and Drum Assembly # DX68QR is for a single hub. These are not sold as pairs as they do not always have to be replaced as a set.
We do offer the brakes for this either as a Set # 23-438-439 or the Left # 23-438 and Right # 23-439 separately. view full answer...
Hey Dave,
RockyMounts has another company make the RM030 for them and stated that it's only available for the AU market and not the US. What bike rack do you have? I might be able to find a workaround but will need to know what the rack is to see what could potentially fit. view full answer...
Hey Scott, yes the Portable Power Watchdog Surge Protector # HU62VR that you referenced is the current version that will work with your Newmar. view full answer...
Hi John; we have several different Advent Air systems that are compatible with your Carrier setup. The one thing you need to do is make sure that the control box is not built into the existing AC. As long as it is on the air distribution box it will work. We have the standard unit and the new low profile models available. They all come with the star capacitor, and the heat strip # ACMHD is available separately. You can choose from the following:
-Advent Air Replacement RV Air Conditioner... view full answer...
Hello Lance, thanks for reaching out. When replacing shackle straps and equalizers, the replacement parts must be identical in size to the original. Since your current shackles are 3.5" long, you will NOT be able to use the 2-1/4" shackles that come with the # K71-449-00 kit. There is a small amount of tolerance, like 1/2" or less, but a 1-1/4" difference is way too much and this would throw your suspension out of alignment.
We do have parts that will still work for you. We have a 3.5"... view full answer...
Hi Hugh,
The Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers # HSE7K-T1SO uses Hydrastar Ceramic Brake Pads # HYD85FR. view full answer...
Hello Bernie, thanks for getting in touch. The 24x60 etrailer Cargo Carrier for RV Bumper # e99049 includes the carrier itself, the supports, bumper brackets and all necessary hardware. You can see all of the included parts in the pictures below. Acessories like the Cargo Cage # e82FV, 24" Extension # e99052 and Light Kit # e67RV are sold separately. If there is a specific accessory you are looking for just let me know. Or feel free to reach out with any other questions. view full answer...
Hey Alen, no, the Replacement Wet Shoulder Bolt # MR52HR does not come with a nut. You'd need to order the Replacement Grade 5 Flange Lock Nut for MORryde Suspension Upgrade Kits # MR85DR separately.
Let me know if there is anything else I can do for you! view full answer...
Hey David, thanks for reaching out!
The shank on the Curt Adjustable 2-Ball Channel Mount # C45926 isn't available by itself, unfortunately.
What were you planning on using it for? I might be able to find an alternative solution for you! view full answer...
Hello John, we can definitely get you some replacement keys for your Lockrack Surfboard Rack # LR59FR. Unfortunately the plastic cover piece is not something that is available separately.
As far as the keys this rack can come with several possible keys. You still have two of the keys right? The key itself will have a number stamped on it, so if you can double check that number, we can make sure you get the correct keys. The following key codes are available:
Key number SH.21.12 # LR94VR
Key... view full answer...
Hey Adam, we have the replacement SE2 cap sensor part # TST47FR that will work with what you have and is pretty small so it wouldn't stick out far enough to cause you any issues or problems with curbs. These are sold individually too so you wouldn't have to order more than you'd need. How do you like the TST system so far? view full answer...
Hey Art, we can help but we don't have a ball mount that has the ball pre-installed and torqued in the configuration you are wanting. So you would want to start with a ball mount that has a 4 inch rise like the TowSmart # TS78FR and then add a 2 inch ball to it with the part # 40038 and you'd have what you are looking for. view full answer...
Hello Joe. I can definitely help get you set up with Torklift Camper Tie Downs for your 2020 Ford F350. Does your truck have a trailer hitch installed on the back? If so, was it installed from the factory or aftermarket? Let me know because that will determine the correct rear tie downs. The # TLF2022 front tie downs will be correct for your truck. The rear tie downs will be determined by the type of trailer hitch on your truck.
The # TLR3500 are for trucks with a non-Torklift brand aftermarket... view full answer...
Go To Results