If you are referring to the removable attachment tabs then, yes, we do have that part. You will want part # BLU57XR. I have included a link to a video review of this part for you.
If this is not the part you need then I have included a link to the installation instructions for Blue Ox base plates # BX2605. There is a parts break down that you can use to identify the part needed. view full answer...
I have attached for you below the full list of replacement parts we offer for the Reese 5th Wheel Trailer Hitch part # RP30047. That said, not all components are replaceable so if it's not on this list odds are it is not offered separately.
Replacement Fifth Wheel Bumper part # 58089
Replacement Handle Kit part # 58055
Replacement Crossmember Head Support part # RP58147
Replacement Head part # RP58146
Replacement Base Legs part # RP30727
Replacement Pivot Pin part # 58484 view full answer...
Yes, you can use u-bolt # TH02943 with your Sears Sport 20 SV cargo box. Or, if you wanted to, you can use replacement hardware kit # TH05603 to replace all of the hardware or to have some extra parts on hand should you need them. view full answer...
My research indicates that grease seal part 125255UC has an outer diameter of 1.980-inches and this correlates with the hubs that use bearing # L44649. The seal part most often used with inner/outer bearing L44649 is seal part # 10-9 which has an inner diameter of 1.50-inches and an outer diameter of 1.987-inches so bearing kit # BK1-150 that you referenced should do it.
You can confirm the seal size by measuring a spindle at the point where the seal rides (point B in the linked image)... view full answer...
The brackets you will need for your CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Gray Plastic - 12" Wheels - Qty 2 # CE19502-2 will be the CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1 # CE26212G. You will need U-Bolts, like the # CE15284GA, to attach the brackets to the frame, but you should be able to reuse the rest of the hardware you currently have. view full answer...
We do carry replacement hardware for the Draw-Tite Trailer Hitch Receiver # 75758, though just two bolts by themselves are not available, as you'll need the entire hardware kit with the Replacement Hardware Kit for Trailer Hitches # RHK.
To order it, just click # RHK, enter "75758" in the "Hitch Item Number" box, select "Draw-Tite" from the drop-down menu, and hit “Add to Cart” to place your order. This will get you all of the hardware from the hitch. view full answer...
Yes, there is a replacement bolt kit for the Curt Front Mount Trailer Hitch Receiver part # 31650 which is a fit for your 2008 Ford Escape. In order to obtain this you can use the Replacement Hardware Kit for Trailer Hitches part # RHK which will come with the exact same hardware that would have been included when the hitch was new. Once you arrive at the product page for the Replacement Hardware Kit for Trailer Hitches you will need to enter "31650" into the item number box and then select... view full answer...
We have exactly what you will need. The Curt Replacement Hardware Kit for Trailer Hitches part # RHK will give you all of the hardware you need to get the hitch installed. Below you will find the instructions linked for specifications and a video we did on a 2017 for your reference. view full answer...
The Reese Hitch 44680 is the same as the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75751 which is a fit for a 2012 Ford Escape. We can offer you replacement hardware using the Replacement Hardware Kit part # RHK which you will need to enter info from the Draw-Tite hitch for to receive the correct parts. view full answer...
You can order additional key fobs with the Autobrake # 3430001 that you referenced with part # FOB1. There isn't a pairing process as they are all programmed to use the same frequency. view full answer...
The Hopkins universal mounting bracket part # HM48625 would be a great option to use as a mounting bracket for the connector of the # BX88206. view full answer...
As long as the Camco Single Stage Regulator # CAM59013 meets the specs that are required in a regulator to run your propane appliance, you can use a single stage in place of a two stage regulator. The # CAM59013 is rated for up to 200,000 btu and maintains a constant 11" w.c. propane pressure.
You'll want to check the old regulator for the specs to make sure this matches up, but as long as it does then you can make this swap. view full answer...
We have everything you'll need to tow your pop up with your 2019 Ford Escape. You need a hitch like the Class III # e98866 which is a confirmed fit for your vehicle, has plenty of towing capacity, and is mostly hidden as well. You will need trailer wiring as well to activate the blinkers, turn signals, and running lights of your vehicle as well which we offer that as # 118802. I attached install videos for both of these on similar Ford Escapes.
Since you wanted to do some towing you might... view full answer...
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13067 will use 1/2 inch 13 x 1-1/2 inch and 1/2 inch 13 x 1-3/4 inch carriage bolts. If you want the complete factory hardware kit use Replacement Hardware Kit for Trailer Hitches # RHK. view full answer...
We may have what you need. It is going to depend on what it is for. We do not cut any keys ourselves, the keys that we have are keys that are provided by the manufacturers for their products.
I could not locate a K0007 key. However we do have the Replacement Key for Thule Racks and Carriers # THKEYN007 which would replace the K007 key from SportRack. Thule bought SportRack and changed the keys from "K" to "N". This is one less "0" then the number you provided also.
If this is not the... view full answer...
Yes the first step when installing the Curt trailer wiring harness part # C56335 is to disconnect the negative battery terminal of your 2015 Ford Escape. I also attached a link to an install video for this kit on a similar Ford Escape for you to check out as well. view full answer...
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
240 lbs of tongue weight would work... view full answer...
I spoke with my contact at Yakima and if you have the Yakima SwingDaddy 4-Bike Rack you need the Replacement Swing Arm Assembly, # Y8890312. The bolt is not sold separately. view full answer...
Go To Results