Hi Larry; the Inno Tire Hold Bike Rack # INH120 won't work on your Forest River Forester MBS because Inno didn't design or rate it that way. There are additional forces applied to bike racks on the back of a Class A and Class C motorhome so it is important to have this rating. Could you put it on the back? Sure, but I don't think you would be happy if it failed and you lost your bikes and rack.
Are you looking for a bike rack with that specific wheel mount style? If so, you can use the... view full answer...
Hey Todd! The replacement for your 1510000140 is the Replacement Control Unit for Kwikee 40 Series Electric RV Steps # LC363985.
Any big plans with the Odyssey once you get the stairs up and running again? view full answer...
The Lippert RV Step # LC3747452 is designed for an entry height of 15-5/8" - 17-5/8" but from what you described it sounds like you have a higher entry height so you either need to use a different step solution altogether. We do have a variety of options but you'll have to adjust your mounting bracket width to accommodate a different step assembly.
The Replacement Steps # LC3722617 is for a Lippert 32 Series which mounts to a 25-1/2" bracket width and is designed for an entry height range... view full answer...
Hey Don, thanks for reaching out. Yeah, the driver’s side on those F53 chassis can get tight, you’ve usually got brake lines, wiring, or a bracket sitting right where you want that Timbren to live. You’re doing the right thing paying attention to it, because you don’t want that spring contacting anything once it starts working.
What matters is that the Timbren can compress straight up and down without hitting or rubbing anything through its full travel. If it’s sitting right next to a... view full answer...
Luxury coach maker Entegra's part number 0282193 for the light lens you need appears to be their internal reference since I could not find specifics by searching on this number.
I reviewed photos and videos of the 2017 Aspire and I noted the unusual tail light design. I linked a photo to show what I found online. The round red lenses appear to be about 4-inches in diameter. We carry a range of such replacement parts that appear on the linked page, such as Peterson # 420-15 which is 3-3/4-inches... view full answer...
Great questions, Susan - and thanks for providing all of the details!
While you can technically use the 3 Bank NOCO GENPRO On-Board Battery Charger # NOC74FR to keep all of your batteries charged (if they are in the 12V series configuration), we've heard from multiple of our manufacturers who make these battery charging kits that the chargers can struggle to read both batteries when they are connected in series so it's best practice to get a charger that connects to each individual battery... view full answer...
There are water heaters that you can use to replace the Atwood GC6A-7, since they are no longer in business, a direct replacement isn't available. As such, the best option I can recommend is to upgrade to a tankless heater, the Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 16" x 16" Door # FR98SR. view full answer...
Aftermarket sway bars and stabilizers do make a difference in the handling of most motorhomes since they are usually far superior to the OEM-grade components. Class C coaches like your 2019 Entegra Odyssey which is built on a Ford E-450 chassis will drive better with aftermarket products that will tighten up the steering and reduce the sway from passing trucks and wind gusts.
For your E-Series cutaway chassis I recommend the Roadmaster front anti-sway bar # RM-1139-176 and rear anti-sway... view full answer...
Hey David, the Timbren kits like the # TFRSDE that you ordered are designed to have a small gap without a load on the tow vehicle like what you had on your F-350 when it was unloaded and then once loaded they will be engaged or at least touch the axle. So since your Super C is loaded they would be at the very least touching. The exact amount of compression though is hard to say. How does your Entegra handle currently?
By the way your camper Jeep and SXS look sick!! view full answer...
Brian, I checked and it looks like some Entegra's were built on a Spartan chassis which would mean that there unfortunately is nothing for you.
But, if your Entegra was built on an E-450 chassis, then you could use the Roadmaster Exact Center Steering Stabilizer for Ford E-Series # RM97MR with the brackets # RM37MR.
If you can let me know what you have, then I'd be happy to see what we have. view full answer...
Hey Carl, we do sell the replacement door magnet sensors you are looking for which tell your power steps when you have the door open and closed.
We have two options for the magnets you may need. We have the part # LC301694 and # LC369299 with the difference being if the circuit needs to be open or closed. The # LC301694 is an open circuit that completes the circuit when the door is closed which tells the step's brain that it's time to retract the steps and the # LC369299 is a complete... view full answer...
Hey Mark,
Thanks for the info and picture. Here is how you'll wire that factory pigtail to the pigtail on your Prodigy P3 Brake Controller # 90195:
(Ford Pigtail colors in the left column)
BN/BLUE - Red wire on P3
BLUE - Blue wire on P3
RED - Black wire on P3
BLACK - White wire on P3 view full answer...
Hey Roy, yes it does look like the Titan Chain Snow Tire Chains # TC2851 you're looking at will fit the tires on your 2023 Entegra Coach Anthem; have fun on your trip! view full answer...
To install the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 in your Freightliner S2RV chassis all you need is the install harness part # 3027-P which plugs into a connector behind the steering column panel. view full answer...
Hey Robert,
The Go Power Solar Charge Controller # GP32QR doesn't have a hand held remote, but it does have a touch screen mount # GP64XR that will allow you to control it. Which comes with Bluetooth capability so you would be able to control it from your phone as well.
What kind of trailer/RV are you wanting to install this in? view full answer...
Hey Brandon! I would be happy to put together a parts list so you can flat tow your 2023 Bronco Raptor. For a complete setup you need a tow bar, base plate kit, safety cables, wiring, and a supplemental brake system. I recommend the following:
-Roadmaster Direct-Connect Base Plate Kit # RM79RR (if you have the standard plastic bumper)
OR
-Roadmaster Direct-Connect Base Plate Kit # RM92ZR (if you have the Modular bumper or Capable bumper)
-Roadmaster Falcon 3HD Tow Bar # RM27NQ
-Roadmaster... view full answer...
Hey David, thanks for the detailed information. For pn 57920 Dexter 5,200 lbs axles you'll need the Bearing Kit item # BK3-300. This kit includes inner/outer bearings, races, grease seal, and cotter pin. They're sold individually so you'll need one set per hub.
Are you doing routine maintenance, wanting a spare set around, or did you break something?
You can add this information, along with any other questions you have, where it says Reply to Jerred H. view full answer...
Hey Christina, the Progressive Dynamics PD9360 is our part number # PD79RR and it is a 60 amp converter. The last two digits of the part number are the amp rating for these converters. A 60 amp converter would work well to keep two 100 amp hour batteries charged. This converter also has a lithium charging profile as well so it's compatible in that way as well. Do you have batteries picked out as well? view full answer...
Hey Timothy, so the 12 V RV LED Puck Light part # DG52445VP that you referenced can be dimmed if you are using an LED compatible dimmer switch. We've checked with Diamond in the past and that is what they have told us. They also mentioned that the quality of the dimming will be based on the quality of the switch used if that makes sense. Unlike incandescent bulbs LEDs don't always dim uniformly as the switch is pulled down. view full answer...
Go To Results