Hey Michael! Since you have the coupe you can use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56044. This is plug and play and then you'll run the power up to the battery like you mentioned. This will combine the turn and brake signals just like on a trailer.
What's the goal for the extra rear lights? view full answer...
There are many options of Bike Racks compatible with your Rhino Rack Vortex Roof Rack, # Y02-490B. I would recommend the Yakima FrontLoader Wheel Mount Bike Carrier - Roof Mount, # Y02103. This mount holds your bike in place by the tires, but shouldn't interfere with your pegs. This is also a nice option with lockable cores # Y07202.
I've attached some review videos of these racks for you. view full answer...
Hey Larry, thanks for getting in touch. When it says "excluding V-series", that means the product will fit all models, except for the V-series models. So in the case of the Covercraft Ultra'tect Custom-Fit Outdoor Vehicle Cover # C17771UG this will fit the 2019 Cadillac CTS Sedan as long as you do not have the V-Series model. If you want to let me know exactly what model of CTS you have I can get back to you. view full answer...
Thanks for your question, Gary.
As of right now there is not a hitch that we carry that fits the wagon model of the 2012 Cadillac CTS. We only have hitches available for the sedan model.
Sorry we don't have anything available. I recommend checking with your manual if the vehicle is rated for towing. I couldn't find any information about is the wagon model can do any towing so its possible that the frame is just not made to be able to do that. view full answer...
Hey Michael,
The Erickson E-Chock Wheel Chocks for E Track # EM09162-2 are the only e-track mounted wheel chocks that we currently offer. What are you trying to secure to your trailer? Is this a ATV, riding mower, or a passenger vehicle? view full answer...
Hey Jonathan, so I apologize for the confusion but the Draw Tite hitch part # 24767 actually fits both the V models and the non-V models. Our fitguide isn't super easy to understand in that regard and for that I apologize. view full answer...
It looks like the best fit for your 2017 Cadillac CTS-V is the Curt Trailer Hitch Receiver # C11900. It is a 1 1/4" Class I hitch, and it's a perfectly good hitch for carrying bikes.
Most of the best bike racks have integrated adapters or 1 1/4" versions anyways. One thing worth noting however, is that Class I hitches are not rated for more than 2 bikes. You did mention you're only carrying 2 bikes, so you're fine.
When you're ready to put a bike rack on your hitch, I have a couple of... view full answer...
They sure will Philip! For your 2009 Cadillac CTS4 sedan, I recommend the Curt Trailer Hitch item # C11307. This custom fit class I hitch has a 1-1/4" receiver. It comes with all hardware necessary to complete the installation.
The Curt item # C11307 is the highest capacity hitch available for your CTS4. It has a 2,000 lbs towing capacity and a maximum tongue weight of 200 lbs. I recommend verifying what your model Caddy's actual capacities are and going off of those numbers.
I've linked... view full answer...
Hey Douglas, we have the Draw Tite hitch part # 24767 that is a fit for your 2010 Cadillac CTS sedan. This attaches to the rear vehicle frame and puts the hitch right at the rear bumper which I believe is what you are looking for.
What are you planning on using the hitch for? view full answer...
Billboard, good news yes the Draw-Tite # 24767 can be installed on your 2013 Cadillac CTS-V! This hitch has a 2,000 lb towing capacity, a 200 lb tongue weight capacity, and has a bolt on install requiring no welding. view full answer...
Hello Michael, thanks for reaching out. I am sorry to say there is no hitch made for the 2012 Cadillac CTS4 Coupe. The only hitch made for the 2012 CTS is the Curt # C11307 but this is only for sedan models and will not fit the coupe. None of our manufacturers (Curt, Draw-Tite, EcoHitch, Stealth Hitch ect...) make anything for this vehicle.
So unless you can find a really good welder to fabricate a hitch for you, you will need to choose a different vehicle for hauling your motorcycle. view full answer...
Hey Greg, unfortunately it doesn't fit. Curt used to have one that fit - Class 1 Trailer Hitch, 1-1/4" Receiver, Select Cadillac CTS #11013 but it's been discontinued. You may be able to find left over stock on another site or a used one perhaps. Sorry about that.
A custom welding shop could fabricate something with Combo Bar 6" with 1-1/4" Trailer Hitch Receiver # E-911 or Gen-Y Weld-On 2" Receiver Tube - 12" Long - Steel # 325-GH-003. view full answer...
The location and visibility of a trailer hitch on your 2010 Cadillac CTS will be almost identical between Curt, # C11307 and Draw-Tite, # 24767. Each of these trailer hitches use the same mounting location and have practically the same dimensions. For an exact measurement, the end of the receiver from the Curt hitch will actually sit 1/8 of an inch closer to the rear edge of the bumper.
As far as aesthetics are concerned, I agree that the Curt hitch has a more pleasing design. We have... view full answer...
Yes, we do have parts that'll fit your 2018 Cadillac CTS to tow a trailer. From what I've found your car has a maximum capacity of 1,000 pounds tops. You didn't mention the size or weight of the trailer but just make sure you stay within this limitation. I also recommend checking your owner's manual just to verify the number.
To fit the Cadillac you want the Curt hitch # C11900. It's a custom fit for the Cadillac and also has a concealed cross tube so you won't be messing with the... view full answer...
The flat portion of the top of this Aluminum Tread Plate Trailer Fender # HP49VR that you referenced is 13 inches, the entire top of the fender is 16 inches. Check out the picture I attached to see this measurement.
As long as you used plenty of bolts to securely install this fender to your trailer there is no reason you could not bolt it to your trailer instead of welding it. view full answer...
To get the Curt Trailer Hitch # C11196 installed on your 2013 Cadillac CTS, you may need to enlarge an access hole on both sides of the frame to get the spacers to fit. This does happen some times due to variances in the manufacturing processes. Typically a rotary tool or drill can be used to accomplish this. We do not have an install video for this application as of yet, but I did include a hitch installation we did on a 2013 Subaru that shows an easy way to expand an access hole. If you... view full answer...
The Solera 10.5' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000182037 is designed for slide out boxes that are 116 inches to 121-3/4 inches when measured from flange to flange. These measurements are found on each of the product pages so you can ensure the correct fit for each slide out. I've linked the page to all your options to help if another size is needed. They will work well to keep rain and debris out of the slides.
I've attached some videos to assist with the installation... view full answer...
As long as your 2010 Cadillac CTS-V is a sedan model the Curt hitch part # C11307 does fit. If you have a wagon or coupe then there are not hitch options available. view full answer...
One of my colleagues has found that the difference between the 9006 and the 9006xs bulbs is the type of base the light has. A 9006 bulb will have a 90 degree angle base whereas the XS bulb will have a straight base. For example, compare 9006 bulb # VX-L9006 with XS bulb # VX-L9006XS.
Certain vehicles require a certain style so you cannot interchange them. I have included a link to all of the lights we have for a 2006 Cadillac CTS.
A 9145 bulb is the same as an H10 like the Vision X H10... view full answer...
The Kats Heater # KH11811 is a cartridge style engine block heater that DOES include the AC power cord shown on the item's web page and in the attached photo. This 400-watt engine block heater can be used with a water/antifreeze blend (but not straight 100% antifreeze). Always be sure to unplug the heater and secure the cord before starting your engine. view full answer...
Go To Results