Hey Gary, for your application I would go with the 5 inch drop version part # BWTS10048B over the 7 inch drop part # BWTS10049B. I don't think you'll encounter a trailer that would require that much drop and it would potentially cause ground clearance issues and just be overall heavier and more expensive for no advantage. view full answer...
Your 2021 Buick Enclave has a wiring pigtail and not a connector for wiring a Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR. The 4 wires are located below the OBD2 port behind the side kick plate(see Image). This is where you will be able to attach the included pigtail using the Heat Shrink Butt Connectors # DW05744-5 and # DW05745-5. You will only need 2 of each connectors for the 4 wires that connect to the brake controller pigtail. view full answer...
Hi Ed; the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-15267 isn't listed as a fit because the 2025 Buick Enclave cannot be flat towed. A dolly like the Roadmaster Tow Dolly # RM-2050-1 typically comes with a light kit so tow bar wiring is not required. However, the diode kit is universal so you can install it on your Enclave if you prefer to run your lights that way.
Where are you headed once you get the Enclave set up? view full answer...
You are on the right track!
The Draw Tite hitch part # 75528 is a confirmed fit for your 2014 Buick Enclave as well as the trailer wiring kit # 118270. The wiring mount part # 18144 will also give you a place to mount the 4-way that bolts to the bumper.
The ball mount part # C45036 that you referenced is would also work well if you need 2 inch drop. I attached a help article that details how to pick out a ball mount drop as well. view full answer...
I checked with Tekonsha and they state that your 2019 Buick Enclave with the factory tow package (factory 7-way) can have a brake controller installed but there isn't factory wiring so you'll need to hardwire it to the vehicle.
For that you would want to start with the Wiring Kit for 2 and 4 Brake Electric Brake Controllers # 5506. This will provide the power source and ground for the wiring for the brake controller. You will need to test the wires from the brake pedal switch of your... view full answer...
Hi Larry!
To tow your 2025 Buick Enclave behind an RV, you would need to use something like the Roadmaster Tow Dolly with Electric Brakes - 4,250 lbs # RM-2050-1. I checked the owner's manual for your vehicle and it says you cannot tow it with all 4 wheels on the ground as it will damage it.
Sorry to be the bearer of bad news. Do you already have the Enclave or is it a prospective vehicle? view full answer...
Hi Louise!
The WeatherTech Custom Fit Hood Protector # WT48YQ will indeed fit your 2023 Buick Enclave Premium. We haven't installed one of these yet, so no video, but I did get confirmation from WeatherTech about the fit.
Are you traveling rough roads, or are you just wanting general protection? view full answer...
The Americana Baby Moon Trailer Wheel Center Cap # AM90086 you found is likely to be the only baby moon cap we have to fit your 2021 Riverside Retro 135. While I cannot see exactly what parts your camper had from the factory I do see it came with 14" wheels. You can verify this is the correct size for your camper by verifying it has the same 9-1/4" inner diameter as your current hub caps or measuring where the tabs are on your wheels is the caps are both gone. view full answer...
Hey Courtney, we have the Yakima Jetstream Crossbars part # Y77TB that is a fit for your 2018 Buick Enclave. This will give you a set of really nice crossbars that are the most quiet and easiest to install as well so you'll really like them. What do you plan to carry with this rack? view full answer...
Yes, you are able to install a trailer brake controller on your 2017 Buick Enclave that did not come with the factory tow package. First you will need a Receiver # e98863 to add to your Enclave. Next we have the 7-Way # 118271 which will allow you to plug into the factory harness and includes the fuses and relays you need to activate the harness. This will attach to the receiver using the Mounting Brackets # C57202 and # 18138 so you will not have to drill into your vehicle fascia.
I... view full answer...
The best solution is going to be the Hollywood Racks Sport Rider SE2 part # HR1450Z-85 which is a two bike rack that comes with a cargo carrier that can install behind it so that you can additionally carry cargo when needed. It can tilt down for rear hatch access as well. It's not a lighter weight solution but for what you are wanting there really isn't a way to make it lighter weight. view full answer...
The Draw-Tite Class III # 75528 and the Curt Class III Trailer Hitch # 13424, which are the available trailer hitches confirmed to fit the 2014 Buick Enclave, are compatible with certain model years of the GMC Acadia, Saturn Outlook and the Chevy Traverse. However, the trailer hitch on your Buick Enclave will not fit your new Lincoln MKX, as the body styles are simply too different between the vehicle models.
If you are able to tell me the year of your Lincoln MKX, I will be happy to... view full answer...
Hi Dan,
There is a 4-way wiring harness for your 2025 Buick Enclave to go with the Curt Trailer Hitch Receiver # C97RV.
The correct fit for that is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C66RV. view full answer...
Hey Rick, the WeatherTech Mud Flaps # WT110008-120004 measure 4.2" x 19" x 13" (L x W x H ) but we don't have a dimensional drawing, though. view full answer...
We sure do!
For your 2020 Buick Enclave the Tekonsha T-One Vehicle Wiring Harness # 118761 will work perfectly. This custom harness is going to plug right into a factory port that's located beneath the vehicle on the driver's side. This is a completely plug-and-play install and it will provide you with a 4-Way connector to power your trailer's signal lights.
I have attached an installation video that you can also follow along with. view full answer...
Hey Steven,
To bypass the 15 amp ECM and Onstar fuses you can use the # RM76514 and for the 50 amp BATT1 fuse you can use the # RM-76517. These both come with switches to activate/deactivate the fuses. You'll likely need to splice in some extra wires to run them up to the dash for easier access. view full answer...
Thanks for your question, Cameron.
Yes, the Tekonsha part # 118270 is a confirmed fit for your 2014 Buick Enclave if equipped without a tow package. It's possible that one of the relays or fuses are defective causing the factory plug to not get the power it needs to work. It's not common at all for that to happen but it can. I'd double check those. If you do decide to replace them and you're still not getting power, it could mean that there could be some sort of damage to the plug on... view full answer...
Hey Richard. To add a brake controller to your 2023 Buick Enclave, I recommend the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness item # RED52VR. This is a proportional brake controller that will engage your trailer's brakes when your Buick decelerates or stops. It activates immediately and is not time delayed. It uses the same amount of force to slow or stop your trailer as you are using to slow or stop your Buick. This is the safest type of controller and the easiest... view full answer...
Installing the Draw-Tite Max-Frame Trailer Hitch Receiver, # 75528, will require the removal of the rear fascia, and will not be able to be reattached on Buick Enclaves that are model year 2012 and older. I have added a link to an install video which demonstrates an attached hitch so you can get a feel for how your 2011 Enclave will look after a completed install. view full answer...
Hi Jose!
I do have a wiring harness that will fit your 2013 Buick Enclave, but it technically isn't a "T" in shape. That said, what you are looking for is the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C56245.
This is still a plug and play harness with no other wiring needing to be run anywhere, but you will need to install a few fuses and diodes to get it working. The instructions go over where these need to go very well, so there... view full answer...
Go To Results