Hello John,
No, the # TH73WH is designed for the Outride. For the Thule Upride you want the Replacement Rear Wheel Holder Assembly for Thule # TH74VW. I included a review video for the product to check out.
Happy Holidays to you and your family, from your friends here at etrailer. view full answer...
Hi Daryll; at this time we do not have any hitch installation videos for the 2025 BMW iX. This is true for the Curt # C87NR as well as the other available hitches. Our installation videos typically come from customers who need a hitch installed on their vehicle. Once someone brings in an iX we will be able to make a video. In the meantime, the best I can offer is the written installation instructions attached below. I also attached a link to local hitch installers if you would rather not... view full answer...
Hello Atila; we do have replacement hardware for the Curt # C13329. What you need is the Replacement Hardware Kit for Trailer Hitches # RHK. You will need to enter "C13329" in the Hitch Item Number field then add it to your cart and checkout. view full answer...
The 7-way wiring portion for the Stealth Hitch # SH56SR on your 2023 BMW iX50 is not available by itself, it has to be purchased in towing kit # SH58QR which includes the ball mount as well.
There is not any other ball mount with a different height for your hitch either, what is the coupler height on the trailer you're trying to tow? And how much of a rise/drop are you looking for? view full answer...
Hello Candace, thanks for reaching out. The correct Stealth Hitch for your 2023 BMW X1 is part # SH77VR. This has a removable receiver, so with it removed there would be no interference with the foot sensor.
We offer installation services here at our shop in Wentzville, MO. So if you want to bring it here you can give customer service a call at 1-800-940-8924 for appointment pricing and availability.
If Wentzville, MO is too far for you, we may have an installer in your area. I have... view full answer...
Hi Ben; I'm assuming you want to add the Konig K-Summit Tire Chains # TH02230K77 to your 20" tires and not the studded tires. What is the exact tire size? As long as they match one of the tire sizes listed further down on the product page they will fit the actual tires.
However, if the manual says to only use them on the rear wheels I can't recommend adding them to the front. Ultimately it is up to you, you can add them to the front if you wish but you might run into problems with steering... view full answer...
Hey Robert,
I ran out to our warehouse to get that measurement for you. From the pin holt to the end of the hitch on the Draw-Tite # DT58KV it is 2-1/2". I attached a photo for you as well to show where I measured.
What Thule bike rack are you using? view full answer...
Fine link tire chains is referring to clearance as opposed to the actual links themselves, so what you want are chains with the most possible clearance for your 2022 BMW. For that, the best option for chains that fit your BMW's 245/50-19 tires are from Konig, as they require just 10mm of clearance:
- Konig Self-Tension, Low-Pro Snow Chains # TH04115250
The Konig # TH04115250 require you have only 10mm of clearance from the top of your tire tread to the wheel well, and also 10mm from the... view full answer...
Hey Terry, the install time for the EcoHitch part # EH23KR that you mentioned is right at 2 hours. This hitch is rated for towing up to 6,000 lbs but it's always worth check to see if the vehicle is rated differently. I did some checking and your 2025 BMW iX is rated to tow up to 5,500 lbs so this hitch would be a great option. Do you have trailer wiring picked out already?
The only hitch we have for your vehicle that is not rated for towing would be the Curt part # C87NR. view full answer...
Yes, it will. I checked with Curt and they said the Curt Rack Receiver item # C87NR will not block the liftgate function. Typically what happens is the range is lost right around the 2" receiver but based on where the receiver extends out from within your trim I would not expect there to be any issues.
The Curt Rack Receiver item # C87NR is confirmed to fit your 2024 BMW iX 50i. This hitch is custom fit and bolts to your BMW with included hardware.
I have linked the installation instructions... view full answer...
Good morning Yongwoo. Have you tried entering your zipcode into our Installer Locator page? https://www.etrailer.com/installer/near-me
This allows you to enter in your info and get calls from shops usually within a couple hours. Then you can compare shops and pick one to schedule an installation. Keep in mind, some shops can be backed up for weeks, so hopefully one of them can squeeze you in this week if it's a small install job.
Let me know if you need any more help!
Sidenote: if you... view full answer...
Hi Hester,
The Curt Rack Receiver part # C87NR weighs just under 25lbs and is designed to be used only with hitch mounted bike racks and accessories. It has a tongue weight of 150lbs to support most bike racks and bikes, but if you're looking to carry two e-bikes, their weight plus the bike rack's weight may be pushing the hitches limits.
As far as range goes, since the hitch is relatively light it should have very little impact on your miles per gallon (mpg) when driving normally and... view full answer...
The lowest profile roof rack for your 2023 BMW iX is from Thule, though not the AeroBlade Edge (those have been discontinued for a number of years). Instead, what you'll need is the WingBar Edge, which will add 4 inches of height. The correct part numbers for your BMW are the following:
- Thule WingBar Edge Crossbars # TH56FE
- Edge Fixpoint Feet for Thule Edge Crossbars - Fixed Mounting Points # TH29SC
- Fit Kit # TH56KE
- (Optional): Thule One-Key System Lock Cylinders # TH450400 view full answer...
Hey Saki, we have the Thule Gateway Pro trunk bike rack part # TH88VR that is a confirmed fit for your 2024 bmw ix xdrive50 and is exactly what you are looking for as it does not require a hitch to be installed and it gives you a great way to carry bikes! Since you have a kids bike an adapter bar like the part # UB01 would be needed as well. view full answer...
Go To Results