Replacement Namsco Wheel Cover - 19-1/2", 8-Lug Wheels - 10 HH - Rear - Qty 1

Video Transcript for Namsco Wheel Accessories - Vehicle Wheel Cover - NA719583 Review

Speaker 1: Today we're gonna take a look at the Replacement Namsco Wheel Cover for the 19.5 inch 8 lug rear wheels for a quantity of one. Now this cover will fit many of the Ford trucks and vans with 19.5 inch diameter wheels that have eight hand holes. What I would recommend to do is if you go to this product page at the bottom of the page, it will list the years and makes and models of the Ford trucks and vans that this will fit on.This is a replacement wheel cover. It's designed to fit over the wheel on the rear of your vehicle. It has a nice low profile design, delivers a nice sleek look. It is made of a 304 stainless steel construction, so it's very sturdy and rust proof and if you notice, has a nice mirror finish to it that gives a nice eye-catching shine.Does use this retention system, which will hold this cover on the center of the wheel, so it won't wobble.

I'm gonna go through that to show you how it installs.Few specs on this. Again the application is 8 lug rear wheels with 8 hand holes. Wheel diameter it fits is 19.5 inches. That's the Ford chassis. Now this will not fit split rim wheels.

The quantity is for one wheel cover. Comes with the mounting hardware and this set of instructions. But basically what you'll want to do is . Now these caps here, these will go over the lug nuts. These are removable if you ever need to access the lug nuts, you could just pop those off and have access to the lug nuts and then pop the cover back on.The main thing you want to do is the center.

This is how you'll attach it, you'll pop this center cover off. It's a three prong center cap. There's a couple notches that you just pop that center cap off and that'll give you access to these holes and this is how it's gonna attach. Basically what you'll do is you'll take this bracket, this mounting bracket here and you'll attach this to the rear hub on your vehicle, remove two of the rear hub bolts that are 180 degrees apart and then install this rear mounting bracket to the hub.So with this installed to the hub, what you'll see there is two holes here and then one threaded hole right in the center. So you just take your cover, line those holes up just like that and then this bracket here is an anti-rotation bracket.

You'll drop that right in the holes just like that and then you'll take this center screw and then just screw it together just like that and screw that all the way down and with this attached to your rear hub, it's gonna keep that wheel cover from spinning. It holds it all into place and once that's screwed down, you'll be able to take your center cap, pop it over just like that. And again, it comes with a nice set of detailed instructions that will describe everything I just mentioned.But that should do it for the review on the Replacement Namsco Wheel Cover for the 19.5 inch 8 lug rear wheels for a quantity of one.