bing tracking image
  1. Accessories and Parts
  2. TRC
  3. Horse Trailer Accessories
  4. Trim and Edging
Angle Trim for Enclosed Trailer - 93-1/2" Long x 3/4" Tall x 3/4" Deep - Aluminum

Angle Trim for Enclosed Trailer - 93-1/2" Long x 3/4" Tall x 3/4" Deep - Aluminum

Item # 36289-955
Our Price: $31.31
Accessories and Parts
Shipping Weight: 1.34 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
This angle trim puts the finishing touch on your enclosed trailer by covering any exposed plywood edges. Aluminum construction is sturdy and rustproof. Trim can be cut to fit your application. 1-800-940-8924 to order TRC accessories and parts part number 36289-955 or order online at etrailer.com. Free expert support on all TRC products. Great prices and Fastest Shipping for Angle Trim for Enclosed Trailer - 93-1/2" Long x 3/4" Tall x 3/4" Deep - Aluminum. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (11)
  • Q & A (0)
  • Videos (2)
  • Photos

TRC Accessories and Parts - 36289-955

  • Horse Trailer Accessories
  • Trim and Edging
  • TRC

This angle trim puts the finishing touch on your enclosed trailer by covering any exposed plywood edges. Aluminum construction is sturdy and rustproof. Trim can be cut to fit your application.


Features:

  • Angle trim covers any exposed plywood edges on your enclosed trailer
    • Can be used on the edge of your wooden ramp door
  • Aluminum construction is sturdy and rustproof
  • Easy to customize and install
    • Attaches with screws (not included)
    • Can be cut to fit your specific application
  • Dimensions: 93-1/2" long x 3/4" tall x 3/4" deep
  • Made in the USA


89-95.5 TRC Angle Trim for Enclosed Trailer - Aluminum - 3/4" Wide x 3/4" Thick x 8' Long - Qty 1





Video of Angle Trim for Enclosed Trailer - 93-1/2" Long x 3/4" Tall x 3/4" Deep - Aluminum

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for TRC Enclosed Trailer Angle Trim Review

What's up everybody it's AJ with Etrailer.com Today, we're going to be checking out this aluminum angled trim, and this is going to be good for your trailers. I'm putting around the edges here of the ramp, just to make it look nice and kind of frame it in there, but it also protects the edge of those boards down there, or even the flooring you have from just coming up when stuff hits it all the time. Let's check it out. Take a look at the side here. You can see we've already installed a piece, and you just see how nice it looks with that flooring there. Just helps protect that edge.

If you come down to the edge here, where we don't have it, you see how this comes up a little bit. I can pull up on it with my finger, and just over time as you pull stuff in here or drag stuff in here with wheels, it's going to catch that and pull that. And it's only a matter of time before that peels off again. That's why where we're going to install it here, along this edge, that's going to keep it pushed down, and we're not going to have any of those issues. Each piece of the angle aluminum is going to come in at nine, three and a half inches long, and then three-quarters of an inch tall.

And three-quarters of an inch wide. Now they are going to have to be cut to length. So on our ramp today, we kind of put it down there, mark it, measured it out, and we use the miter box to get all the angles just right to where we wanted them. So with a cut, we went ahead and set it here at the edge of our ramp. I'm going to keep it in place with this hand, to get it right where we want it.

And I'm going to drill the pilot hole first. And they kind of match the pattern we've already done. Let's go right here, and start drilling. And once we've done that pilot hole, we just come back with our screw and run it in. Just like that.

And the other quarter, we're going to repeat that same process that way, just holds that piece of trim in place, while we do the middle. After we did both ends, we just kind of went through and did pilot holes for the remaining screws. We space them out evenly. We made sure we measured to make sure that it was right and matched the ones up front. But once we did that, you can see it's on there really nice, it's going to help keep this end down and not causing any issues when you're bringing stuff up or pulling stuff off of there. Now the hardware isn't included. So you're going to have to get your own hardware for that part, but that's not that big a deal. It's really easy install. Overall, they just makes the trailer look nicer. I think that about does it. Thanks for hanging out. Hope this helps..

Customer Satisfaction Score:


Customer Reviews

Angle Trim for Enclosed Trailer - 93-1/2" Long x 3/4" Tall x 3/4" Deep - Aluminum - 36289-955

Average Customer Rating:  4.8 out of 5 stars   (11 Customer Reviews)

This angle trim puts the finishing touch on your enclosed trailer by covering any exposed plywood edges. Aluminum construction is sturdy and rustproof. Trim can be cut to fit your application.

by:

Materials we’re damaged upon arrival but that was not the fault of etrailer. We have always had excellent customer service, easy ordering and received items in timely matter.



by:

Products were great



by:

Fast shipping great seller



by:

Mike

8/15/2022

Excellent trim is holding up perfect.



by:

Quality product.



by:

Great response to all.. Fast ship.. will order from again.. Thanks



by:



by:

Thank you for quick shipping on our ord ers.



by:

A perfect fit.



by:



by:


11
11

See what our Experts say about this TRC Accessories and Parts

  • Replacement Wall Trim Recommendation for a 1994 Haulmark Enclosed Trailer
    Hey Domonick! I recommend checking out the 93-1/2" Long Aluminum Angle Trim for Enclosed Trailer # 36289-955 for your application. This has the 90-degree corners which is most likely what your trailer came with. The Corner Screw Cove Trim for Enclosed Trailer # 36293-955 you were looking at has rounded corners which could still work, but it really just depends on what style you're wanting, and if you want it to be an exact replacement or not.
    view full answer...
  • Availability Of 3/4" x 3/4" Aluminum Floor Edging
    We do have the 3/4" x 3/4" aluminum angle trim # 36289-955 which appears to fit your description. It is sold in a 12' section, but you can easily cut it down to size. If this is not exactly what you are looking for, feel free to send me a picture so we can see the exact shape/profile of your trim and I am happy to see what we can offer you.
    view full answer...
  • Do You Carry The Siding and Components For a Vintage Camper?
    While we do not carry the actual siding for campers we do have Trims # 36277-955, # 362530-955 # 36289-955 as well as Butyl Tape # AL64UV and Sealant # 344270341437-1. These components will be needed to seal your camper and help prevent water from getting behind the siding.
    view full answer...
  • What Is The Purpose Of The Trim On The Access/Escape Door For Trailer Floor?
    The trim used is a simple angle trim like the # 36289-955. This trim is used to help protect both the hatch and opening from damage as the exposed wood flooring edges are the most likely part to become damaged. Then you will be able to use the Hinge # H418-204U, Handle # RR02 and Latch # 37220645 that you saw.
    view full answer...
    Image 1 for

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Andrew K
Installed by:
Andrew K
Employee Jeff D
Installed by:
Jeff D
Employee Jacob T
Video Edited:
Jacob T
Employee Leah S
Edited by:
Leah S
Employee Mike S
Written by:
Mike S
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924