Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Black powder coated anchors slide into a 2x4 stake pockets on your flatbed truck or trailer. Movable anchors secure with the included pins and clips, so you can quickly and easily remove and reinstall them as needed. 12,000 lbs Max load.
Features:
Specs:
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Average Customer Rating: 4.5 out of 5 stars (66 Customer Reviews)
Black powder coated anchors slide into a 2x4 stake pockets on your flatbed truck or trailer. Movable anchors secure with the included pins and clips, so you can quickly and easily remove and reinstall them as needed. 12,000 lbs Max load.Excellent product! These are great to have around when needed to use stake pockets without damaging rope or straps. Convenient for attaching a lot of styles of hooks too. Very happy with these.
Great addition to my utility trailer. Got them to tie down my tractor because I did not feel comfortable clipping the straps to the stake holes. I have used them more to transport my full size UTV and they have really worked well.
My opinion is the anchor has way to much slop in the 2x4 size stake pocket. I would prefer they were wider for a tighter fit. It is like it is not made for a 2x4 size stake pocket. Plus with the width being so narrow I could see this actually bending the bolt overtime. The product is well made but the design of the width dimension is poor. I should have went with a different product like the REDLINE #WFSPDR
Exactly what i needed. My trailer’s stake brackets are smaller then the standard size, and these fit perfectly. Seem very well built and a value for the price.
exactly as described
I frankly think it’s just a bad design. By definition, the whole principle has the long bolt to secure the bracket. Necessarily, when you ratchet a strap against the loop you are likely going to pull up on the assembly until it stops at the bold. Then, the question is the strength of the bolt ( bold whose length is way longer than it needs to be). Obviously, with bumps, etc, the bolt can potentially move laterally. This can wind up putting pressure on the cotter pin. I believe what’s happening is that the cotter pin breaks under stress. The real safety problem, however, is that you may not catch that the bolt or pin or both are missing. The bolt is down under the assembly. You can strap at an angle and it’s likely that the side pressure will force the assembly to bind and not come out. So I expect that I’ve been using the set up without realizing that the bolt is missing. If you were to get into a quick turn you could wind up taking pressure off one side and then the assembly could lose the bind and then pull out. At a minimum, I would shorten the bolt to the required length and I would discontinue use of the cotter pin. I’d just have a bolt on both ends. The pin is not capable of handling the side load pressures, particularly where the angle of a strap is putting a lot of stress and if the cotter pin is bound, either against the assembly or against the side of the trailer it will just snap. For the above safety reasons I’d recall them.
Sierra K.
11/2/2021
I called Rackem manufacturer and Glenn recommended that instead of using the pin, as this application is just for quick installation loads, he would suggest for a person like you using this repeatedly for lateral loads, to drill a hole in your stake pocket and attach the D-ring with a nut through it for a more permanent installation.
Should work great for my trailer.
It fits too loose, but overall a good p roducr.
These stake pocket tie downs make securing chain very easy. Be aware of the WLL as it may be less than the WLL of your other components.
A little disappointed in these. When you slide these in to the stake pockets there is a lot of slop in them all the way around. D rings are small at 2.5''. The folded part of the anchor is less than 3/16'' thick and 2-3/4'' x 1-1/4 makes for a lot of play in a pocket that fits a 2x4. I' sure when everything is cinched down it is all good, but you will probably have to remove these every time when unloaded for the amount of noise these would make rattling down the road. I may return these and have my own made with a little more beef to them
This product does exactly what it's advertised to do for your trailer. After installing them on my trailer in a matter of minutes, I'm look forward to hauling my race car with more confidence. etrailer delivered my product quickly too.
These will solve the tye down problem I was concerned with. hooking up the tye down strap @ the edge of the trailer. they will make an easy way to attach any number of objects.
First time ordering from eTrailer. Experience was good. Online ordering was easy and the Stake Pocket D-Rings are awesome! I ordered six of them and will definitely be ordering more.
Great product to help secure my UTV to my Trailer.
Exactly as described. Fit in existing pickets on trailer perfectly. Haven't used to haul yet.
Great product. Works like a champ. Now I can quickly and easily relocate my tie points to adequately secure a single or multiple items on my car trailer
Exactly as described and will work perfectly for extra tie downs.. As usual this company rocks !!
Had a mix up on my original order,but it was fixed with courteous and very fast shipping. I highly recommend buying from this seller. The product is extremely strong and durable and the customer service is unbeatable. I can't give more than 5 stars, but I would. A+++
Nice heavy duty. Fit in stake is loose doesn't fill up the pocket space and could allow for shifting within pocket - about 1/2" to 3/4 " of slop. Had hoped for a tighter fit
Purchased 2 pair of these as additional tie down points for heavy equipment. Very well made and work perfectly. Great quality, good value, very happy customer.
Great service good product, The only issue with the stake pockets is that they needed to be ground down the edges were sharp on all of the pockets.
These don't fit my stake holes well, but they work. Its easier to attach to a During than the frame.
Thomas M.
12/29/2021
These anchors fit standard 2x4 stake pockets easily.
David
12/30/2022
These dont fit my stake holes well, but they work. Its easier to attach to a During than the frame......my comment a year ago. It hasnt changed. It is smaller than the width of the pocket and the bolt is an inch or so below. Im getting ready to bolt on d-rings instead. It has worked though...
Excellent adapters for hosing cargo.
Fit my stake pockets and hold great.
Just what I needed for my trailer
Do you have a question about this Tie Down Anchor?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mitch
1/16/2021
Use them every time I haul my tractor or UTV. A year later and they are as good as new. Absolutely no complaints