Replacement Adjustable Support Brackets for Curt TruTrack Weight Distribution Systems - 8"

Video Transcript for Review of CURT Replacement Adjustable Support Brackets - C25RV

Hello, neighbors, Steven here with etrailer.com. Let's take a look together at our replacement adjustable support brackets for the Curt TruTrack Weight Distribution Systems, specifically an eight inch option. So folks, this heavy-duty replacement support bracket, again, fits and works with the Curt TruTrack 2-Point Weight Distribution System with the integrated active sway control. Now, it does exclude models that have the chains. Now, what this does is allows you to mount your spring bars on a trailer frame that's up to eight inches in height. Now, the brackets keep the spring bar in place.

And you got the little L bracket down here that keeps that spring bar on here, and that's where it slides. Obviously, when you get this all mounted on the trailer frame, it's not gonna be moving around on you or anything like that. Now, you will get all the parts you see here, so enough to do one side of the frame. So if you need two, obviously, one for each side, you need to make sure you purchase two of these to get the complete setup to do both sides of the trailer. Now, there's different holes here that you could take this nut off and bolt, and you could certainly adjust this L bracket up or down, depending on the height you need with all these different lined holes here.

So you could go up higher if you need to or lower, depending on what drop you need, et cetera. So lots of versatility here. Again, it can fit up to eight inch trailer frames. Well, folks, that's gonna wrap it up. Thanks for looking with me today at this replacement adjustable support bracket.

I'm Steven, have a good one.