
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy equipment like a plow or front-mounted gear can pull the nose of your vehicle down and throw off steering and braking. The Timbren Front Suspension Enhancement System adds up to 2,400 lbs of support to keep things level and stable under load. The hollow rubber springs mount to custom brackets above the axle, working with your factory suspension to control sag and maintain proper headlight aim even with added weight up front.

Every bump or dip transfers shock through your suspension, especially when loaded. These hollow rubber springs absorb road impact before it reaches the frame, softening the ride and cutting down on harsh jolts. The design lets the springs compress along their folds for a smoother, more controlled feel while helping extend the life of your suspension by preventing bottoming out on rough terrain.

When one side of your front axle takes more weight—like when cornering hard or carrying an off-center load—each spring responds on its own. That independent action keeps your vehicle steady through turns and limits body roll or sway when you have to steer quickly. You’ll notice better traction, smoother handling, and a more confident drive on curves or uneven ground.

Adding support shouldn’t mean a complicated setup. The Timbren system uses vehicle-specific brackets that bolt right onto each frame rail with no drilling required. Once mounted, the rubber springs are always in position to do their job—no air lines, compressors, or adjustments needed. It’s a simple, mechanical solution that gives reliable performance every time you load up the front end.



Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Aiden here with etrailer. Today we're gonna be taking a look at the Timbren Front Suspension Enhancement System. This is going to be an upgraded bump stop for the front end of your vehicle, whether it be a car like the 4Runner here or a motor home. These are gonna come in a variety of different kits and fits with different capacities and help stabilize the front end of your vehicle. Let's check it out.
So why would you be looking for something on the front end of the suspension enhancement side A lot of people are pretty familiar with airbags on the rear axle, and a lot of those suspension enhancement components are used in towing applications or maybe truck beds where you've got really heavy loads in the bed and you need extra support at the back of the vehicle. Now what the front end can do is stabilize that front end, if you do have something like a front mounted hitch, maybe a plow on a truck, or on a larger vehicle or even a smaller vehicle like this, it does help stabilize body roll a lot because these are going to be a lot beefier than the factory suspension and the factory bump stops, that is, and help limit that side to side movement as we're taking turns or driving down in like really windy conditions on the highway. So this will give a significant upgrade for those applications. As far as the construction for these goes it's going to be a hollow Aeon rubber material with a progressive spring rate. Now, what the progressive spring rate means is the more this compresses, the more pressure it has, the more it's going to work at returning the vehicle to its natural position.
So it's just going to resist more and more as it gets further compressed. As for the installation process, this particular one that I've been holding is for the 4Runner, and this one is a very basic kit. It really just has a threaded end with a bolt and a plate on the inside, but this just spreads into a factory weld done on the 4Runner. Very straightforward install. But for all the other different fits and kits, those are gonna have custom brackets and their own hardware that come with it.
So no matter what one you end up going with, if it's a fit for your vehicle, it's going to be custom fit. So the installation should be just a straightforward bolt on process. Now obviously that can vary depending on the kit and what vehicle you're putting it on, especially on the motor home side of things. But for the most part, you should be able to have a very straightforward install process with any of these kits you pick out. And to make sure you find the right kit for you, be sure to enter your vehicle information into our fit guide and use that to narrow down for the custom fit options available for your vehicle.
If you're considering some front suspension enhancement, I do think that these bump stops from Timbren are a really solid option. From the testing we did in installation on our 4Runner, they performed great. They reduced a ton of the body roll and really helped when we're going over speed bumps and just aggressive driving conditions where we need that extra support. Whether you've got a truck with a plow on it, or a motor home that you're trying to reduce body roll on, something like this can be be a huge help and it's a very straightforward solution. But that'll do it for a look at the Timbren Front Suspension Enhancement System Bump Stops. Thanks for watching.
Ratings & Reviews

Heather A.
5/8/2026
I hear you, and that makes sense based on what you’re describing. If the Timbrens are in constant contact, they’re basically always engaged, which is why the front end feels so stiff instead of only firming up under load. You might actually be a really good candidate for SumoSprings part # SSF-281-47 (as long as your truck is a 2WD) They’re a similar concept but made from a softer, more progressive material, so they compress more gradually instead of feeling like a hard stop. That usually gives you support when you need it without taking away all the ride comfort like you’re experiencing now. Glad to hear the install went smoothly and the quality was there, that’s pretty typical with Timbren, it just comes down to how they behave on your specific setup. What were you mainly trying to improve up front, sag, handling, or just a smoother ride overall?


Nick S.
11/10/2025
That is great to hear! I am glad you were able to feel the difference right away. I am happy to hear that you were able to get them installed easily as well.

Brooke M.
7/9/2025
Happy to hear that, Dan! Thank you for sharing all the photos, too. What are you towing now that you have a some extra suspension support?



Scott
3/23/2026
Still working fine, the truck’s suspension has settled now the the ride is even bettet

Bobby L.
5/10/2020
The timbren springs are working out better than expected. I installled new Monroe matic RV shocks front and rear on my 2006 Chevy Silverado 1500 just prior to putting the timbrens on the front and the sumo springs on the rear and the ride is great especially with a load or hauling my travel trailer and the ride is just as smooth empty. I highly recommend the timbren and sumo springs because they fit by application and there is nothing additional to buy. Thanks etrailer.

Jeffery
8/4/2023
I have upgraded towards trailing with my truck camper Artic Fox 990. I have not had the time to reach to etrailer for a solution with my 1998 Dodge 2500 timbrens installation. I have a new addition and will install the timbrens on a F-550 to have the same travel assurance...Pre trip test run to Key West early this winter... Anchorage 2024 Spring...Thank you etrailer

Ron H.
5/24/2020
Working GREAT!!!!

Gabriel
2/23/2026
Still going strong. The ride is a little bumpy but when I tow the truck doesn’t feel “squishy” whenever I make my turns. I’m still super happy about the product.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.












Kate F.
3/26/2026
Glad we had the right fit for you Tom! Where are you located, and how much snow did you get this last season?