
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
When you’re towing a light trailer or hauling gear that makes the rear end sag, these Hellwig Load Pro 15 helper springs add up to 1,500 lbs of load-leveling capacity to keep things balanced. They work with your factory leaf springs to prevent squat and reduce sway so your truck stays level, your steering stays precise, and your headlights stay aimed where they should.
Heavy loads can make a truck bounce and feel unsettled. These helper springs flex along with your factory leaf pack to control bounce and body roll while still giving optimal stability. By taking some of the strain off your stock suspension, they help extend the life of your leaf springs, tires, and brakes for more dependable handling mile after mile.
Not every haul is perfectly balanced. The Load Pro 15 lets you fine-tune each side separately using the included U-bolts so you can even out uneven cargo or camper setups. Whether it’s tools on one side or a trailer tongue weighing down the back, being able to adjust each spring gives you a consistent, level stance.
You don’t need a shop to add real load support. The bolt-on design mounts above your factory leaf springs using the included hardware—no complicated fabrication required. Once installed, you’ve got durable steel helper springs with a silver vein hammer tone powder coat finish that resists corrosion and keeps working season after season.

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at these Hellwig Load Pro 15 Load Leveler Helper Springs. Now, these have been specifically designed to fit your 2005 to 2015 Toyota Tacoma, excluding the PreRunner, and on custom fit parts such as these springs I do recommend taking advantage of our vehicle fit guide here at etrailer.com. Simply input the year, make, and model of your vehicle, and our fit guide will confirm if these will work for you or if we have something comparable that will work for you. Now these custom helper springs with the load-leveling capacity of 1,500 pounds are gonna install above your truck's rear factory leaf springs to help reduce sway and body roll while preventing sagging when towing or hauling loads.
They are going to extend the life of your factory suspension, tires, and brakes, and these springs are going to flex with your leaf springs to limit bouncing and provide optimal stability. Now, I do kind of have these loosely assembled, loosely put together, and the orientation that I have this set at, this would be the front of your Tacoma and then this would be the back of the Tacoma, so we're going from rear to front if you kind of can picture that in your mind. Now this is going to be a bolt-on installation above your factory leaf springs as I said, with the included hardware that I'm using here to loosely hold everything together. Now the U-bolts can be adjusted to suit different loads. The driver's and the passenger sides can be adjusted independently for uneven loads.
These springs are made here in the USA of a durable steel construction, so that's going to ensure long-lasting performance, and they do feature a silver vein hammer tone powder coat finish that's gonna help resist rust and corrosion. I do wanna point out that it's not a good idea to install these on vehicles that have a composite or plastic leaf springs. Because these Hellwig springs are so robust, they will fracture or damage those plastic leaf springs, so if you have plastic or composite leaf springs on your truck, this is not going to be good for you. Again, these do have a weight capacity of 1,500 pounds, but these helper springs don't actually increase your vehicle's weight-carrying capacity. Instructions are included to guide you through the installation process, and if you do already have these springs and you would like to share your experience with us, we would love to hear back from you regarding how these are working out for you.
You can drop a comment on this product page letting us know how these are working out for you, but if you do decide to pick these up, share with us your experience with installing these and getting these installed on your Tacoma, and if you leave a review, you can share some photos showing these in operation underneath your truck after the installation on your Tacoma. Well, I think that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.