To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy trailers and bed loads can make the rear of your truck sag, throwing off steering and braking. The Hellwig Load Pro 35 helper springs add up to 3,500 lbs of support above your factory leaf springs to keep your ride level and steady. They flex with your suspension to prevent squatting and maintain even weight distribution, giving you better control when towing or hauling serious weight.
When the road gets rough or a trailer starts to sway, these heavy-duty helper springs help keep things under control. Their constant-rate design works alongside your leaf springs to limit bouncing and reduce body roll so the truck feels more planted through curves or uneven roads. That extra stability makes long hauls safer and smoother.
Sometimes one side carries more weight than the other—like when gear or cargo is off-center. Each spring on the Load Pro 35 can be adjusted independently, letting you fine-tune the setup to keep both sides level. This helps your suspension stay balanced and reduces uneven tire wear when hauling tools, campers, or other uneven loads.
The Load Pro 35 kit is made from heavy-duty steel with a silver vein hammer tone powder coat finish that resists corrosion. The bolt-on installation kit includes everything needed for a solid fit above your factory springs, extending the life of your original suspension, tires, and brakes through years of towing and hauling.

If your vehicle is equipped with a brake fluid proportioning valve this constant rate spring is not recommended. Only progressive rate helper springs should be used. If your vehicle is equipped with a factory contact overload it may need to be removed before installing the new helper springs. Please consult the installation guide. Do not install on vehicles with composite (plastic) leaf springs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a look at these Hellwig Load Pro 35 Heavy-Duty Helper Springs. Now, these springs have been designed to fit your 2001 to 2010 Chevrolet Silverado, and GMC Sierra 3500s, then your 2007 Silverado and Sierra, both the classic and the new body 3500s. On custom-fit parts such as these springs, I do recommend taking advantage of our Vehicle Fit Guide here at etrailer.com. Simply input the year, make and model of your vehicle, and our Fit Guide will confirm if this will work for you or if we have something comparable that will work for you. So, these custom helper springs have a load leveling capacity of 3,500 pounds, and they're going to install above your truck's rear factory leaf springs to help reduce sway and body roll, while preventing sagging when you're towing heavy loads, and they're going to extend the life of your factory suspension, tires and brakes.
So, these springs actually flex with your leaf springs to help limit bouncing while giving you optimal stability. And this is going to be a bolt-on installation, again, above your factory leaf springs with the included custom installation kit, and as I hope you can see, I kinda have everything here loosely installed, and this is basically what it's gonna look like when you have it installed into place. Got the U-bolts and everything here, so just kind of just loosely installed just to show you what these are are going to look like. So, the driver's and the passenger's side can be adjusted independently for uneven loads. Now, a few things I wanna point out.
If your truck is equipped with a brake fluid proportioning valve, these constant rate springs are not recommended. Only progressive rate helper springs should be used in that case, and if your truck is equipped with a factory contact overload and may need to be removed before installing these new helper springs, of course, you wanna consult your installation guide, and then you don't want to install these springs on vehicles with composite or plastic leaf springs, because these springs are so robust, it could fracture or damage or break those composite or plastic leaf springs. Now, these are made here in the USA of a durable steel construction, so that's going to ensure long-lasting performance, and they do feature this silver vein hammer tone finish that's gonna help resist rust and corrosion. Again, the weight capacity is 3,500 pounds, but I do wanna make you aware of the fact that these helper springs do not actually increase your truck's weight carrying capacity, so you wanna make sure you're not exceeding your manufacturer's recommended weight limit. Instructions are also included to guide you through the installation process.
These do have a lifetime warranty from Hellwig, and I think that's gonna wrap up our look today. I do hope that it was helpful for you. When you get these installed, let us know how they're working out for you. Send us a review, drop us an email or give us a call, and we'd also like to see pictures as you're going through the installation as well, just to see how these worked out for you, and again, we'd love to hear how you have received the benefit of these and how you feel these are treating you. Well, again, my name is Andy, thank you for joining me.
.
Ratings & Reviews

Brooke M.
5/15/2025
Wow, 2 months in Alaska? That must have been beautiful. Would I be correct in assuming you got a front row view of the Northern Lights during your trip?

Brooke M.
4/8/2025
Hey Charles! Glad you able to improvise but I really feel bad it arrived missing pieces. Let me look into this more closely for you.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Mike L.
7/14/2026
I wish we did too, Otis! The problem is that we have multiple warehouses. We don't stock everything at our Wentzville location where we used to offer will call which caused problems. We decided that although it's a great idea, we shouldn't do it if we can't do it right.