SumoSprings Solo Custom Helper Springs - Front Axle

I bought the sumo springs for the front of my 16 2500hd Duramax. The install was really simple Chanel lock pliers twist and pull old ones out and a little glass cleaner and a small pry bar pushed new ones right in. Went with the sumo springs over the timbrens cause I didn’t want the truck sitting on the stops and the sumo springs still have about 1 inch before they touch control arm so normal ride isn’t affected only have the added support when I install my V plow
Very satisfied with etrailer and the sumo springs thank you 611056

Installed in a 2019 3500HD Chevy Dually for a little extra support with an upcoming bumper. These do help dampen with potholes and railroad tracks. Takes the sharpness of the hit out which is nice. Big props to the folks who can install these in 30 minutes. Old ones were a nightmare coming out and the first two Sumos not much better. Ended up putting them in the, freezer for a while which seemed to help on the next two. Quality product though, and Etrailer is great as usual.1206548

Product appears to dampen front end response so far to hard bumps. I definitely rate the install on these things LOWER than POOR. The instructions lead you to believe that you can simply twist and push these in place. This is not the case for the home mechanic with a floor jack. I had to take the truck to a mechanic and he threw all kinds of muscle, people, pry bars, and other items at these to get them to seat properly. Once in, they appear to function as intended. I would suggest you consider the fact that you may need outside assistance when installing these things.559218

by: Jerry04/19/2020

Easy installation, very good performance. no worry about air line or compressor failure. 782917

1360968

by: Jeremy01/04/2023

I installed Sumo Springs on our 06 Xterra right after we bought our Casita 17' trailer. The back of the X squatted a bit more than I liked. I had also noticed before some tendency to bottom out if the car was full of people and stuff. These ingenious devices are a perfect solution for me! They are about 3/4" clear of being engaged with the axle when unloaded, so the ride is not overly affected, but progressively take up some of the weight when the back end starts coming down with load. It now sits very nicely with the trailer connected, no weight distributing hitch and stuff in the back, and no more bottoming. We've put a good number of miles on the X in the last year, towing and not towing, and they are still doing the job.

I should note, the back of my Xterra is lifted about an inch with AAL springs. If that were not the case, the Sumo Springs would be engaged all the time. That will vary with vehicle.

I will also note that they are non-adjustable, unlike airbags. I kinda like that, I didn't want to mess with adjusting air pressure and such. But once they do start kicking in as one or both wheels travel, they do stiffen it up quite a bit. I mean, there's no way around that; you can't take load without stiffening the suspension. As such I think they inhibit upward axle articulation a bit when 4-wheeling, but for us that's not a big deal. Since they do not connect to the axle, they don't affect downward articulation at all.

The pics are shortly after installation, one with the car unloaded, and two with trailer and gear loaded up.1492849

Click to Enlarge

Click to Enlarge

Click to Enlarge

I believe it’s going to be a great addition to my truck when pulling our RV. Looking forward to a smoother, more even ride. I left the 2x4 blocks in overnig8ht and drove around to ensure a good seat for the springs.1540479

Click to Enlarge

Very easy installation in about 20 minutes. Very ingenious concept as opposed to bolt on leaf style helper springs1552548

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: Dan08/01/2023

These Sumo Springs were easy to install, even for a 70 year old guy. I tow a 7,000lb camper and even tho I have a nice WDH I still had som sag on my Tundra. These helped level it out when towing and got rid of “some” of the bounce. They were really a godsend when I overloaded the bed with about 2,000lbs of pavers. That weight squished the Sumos significantly but the truck drove and rode great. Better and less expensive than air bags.1636874

Click to Enlarge

The SumoSprings Solo came to the RV Resort today. I installed them on my Titan SV today in less than an hour. Only drove 10 miles with them and they are what I was looking for. In my opinion it was a needed upgrade and thumbs up!1323587

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: William01/13/2024

I have had these on my Jeep Gladiator for over a year now and I still like them. Sumo Springs really help with sag when towing my Scamp camper trailer and when the truck bed is loaded with stuff. When it is cold outside they are stiffer and I can feel when they hit the stops on hard bumps. Sumo Springs are a very easy overload spring option with factory lift.1710020

Click to Enlarge

Gave it 5 because of ease of install - note they use SAE threads 9/16, truck frame and oem is metric 15mm wrench. Makes no difference but don't use oem nuts on spring. I installed all shims supplied and this left about 3/4" gap so hoing its the best for my needs. Easy to reduce if needed.1522522

Click to Enlarge

Click to Enlarge

by: Zach01/24/2024

While these worked great for the first few months and helped level the load, they have now become deformed and squished out of shape permanently. We have a slide in camper that is on the truck for only for trips otherwise the truck is unloaded and off the bumps. I did not expect them to deform so much, and so easily after only a year of use.1713830

Click to Enlarge

Fairly simple to put on but need to work around the brake lines and bed cross beams. I haven’t tried it yet with weight. I have enclose pic of drivers side. Maybe can’t tell from the pic but there is space and flexibility around the lines around bolt.1748975

Click to Enlarge

Click to Enlarge

Click to Enlarge

Straight forward, simple, replacement for OEM springs. These springs make contact with the lower arms all the time and definitely help dampen the bounce effect from a heavier steel bumper. Any rolling effect from uneven roadways and turning is also reduced, it feels the vehicle is more stable. For my situation, this is the first step to take before considering replacing shocks, etc., and is very economical. I'll give it more time, but I believe this is all I'll need to do. Thanks etrailer! Quick shipping!1530885

Very impressed. Stopped the Tacoma lean. Also helped with the trailer. I do use a distribution hitch I bought from etrailer. Just bought the sumo spring for other applications. Those little bitty factory bumps where junk. These help with lean, and off road hard bounce.They are great.
1370702

First off, these won't fix worn out suspension components, they are designed to improve ride quality by reducing sag/porpoising, especially on heavier vehicles.
Our 2010 Roadtrek 210P (75k miles) is a great rv but essentially a big heavy tub going down the road. Has the tendency to lean and wallow front to back. New shocks and all suspension is good, as mentioned make sure that stuff is all in good shape.
Pics show the oem stops vs the SS stops. Big difference - you may assume ride gets harsh but not the case. The oem stops were very tired and didn't do much. The preload on the new SS stops is just about perfect - any weight changes are very progressive which takes the harshness out of the ride. I didn't really see any change to ride height either.
Road manners are improved, there's a bit more resistance to lean, but the main difference is that the front end doesn't try to change height as readily with the back end.
Not a big deal to install. Youbdont need to pull the wheels, just turn them side to side to get to the stops. Pop out the old stops and clean the retaining cups with a wire brush and some brake clean. I used syl-glyde on the new stops to help get them into place. I also used a crowbar under the stop to push it into the cup while making sure the 4 tabs captured the top of the stop. Final step was to lower the van and give it a drive, then check to ensure the fit was good. The key here is to clean the cup first and use a bit of lube on the new stop.

Very pleased and I'll be installing SS on the back end soon. Yup, they're pricey but they are good quality with a limited lifetime warranty.1236734

Click to Enlarge

Click to Enlarge

Click to Enlarge

Great upgrade from the oem jounce. Easy to install with 2 people but follow the install video and use a 1/2" deep socket with a long extension. Took about 30 minutes.1558277

by: Kris03/16/2023

So glad I found these! Best upgrade for my Winnebago Era Touring Van. Simple to install. I only needed a floor jack to get it done. Van doesnt ride like a boat in a storm anymore. Highly recommend for Sprinter vans.1537602

These springs are amazing! They helped tremendously pulling my landscape trailer with all my mowers. I picked up a tractor impliment that I would normally bring a trailer for, but decided to put these springs to the test. Couldn't believe how good my truck rode and handled with 780lbs at the rear of my bed! These springs have exceeded all expectations.
I will say that I initially put the spacer, but found it effected my ride to much so I pulled it. Afterwards it rides like stock.1687976

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

These do not fit a 2006 ram 2500. As you can see in the
Photo the bolt holes are WAY off. It also does not sit over the axle tube. My only option at this point to use them is to make a 2nd bracket to bolt the helper too. Very disappointed.1680673

Click to Enlarge

We pull an off-road teardrop camper with our 2013 Toyota Tacoma and were looking for a little help with the rear end sag when we have that hitched plus putting some weight in the back of the truck (firewood, water, etc). Our Tacoma is lifted (2.5") but the lift kept the stock springs with an added Deaver leaf to help with the notoriously soft Toyota springs. However, with the shell and ~300 pounds of weight in the back, it still sagged, especially with another 250 lbs of tongue weight from the trailer. The Sumos have eliminated that sag, even with bigger loads in the bed, eliminated body roll (also notoriously bad with Tacomas) and didn't destroy the ride for day to day driving. There might be a slight bit more stiffness when hitting speed bumps, but definitely not bad at all. If anything, I would say it IMPROVED the ride and handling.

The springs themselves were simple to install, less than half an hour start to finish. Some reviews have said they were bumping the frame after installing but we had about 1/2" gap on both sides. The only "specialty" tool would be a torque wrench capable of 90 lbs to get it to spec.

We considered Firestone air bags but after talking with the reps at e-trailer, we decided on these and couldn't be happier. Reasonably priced (half the price of air bags), no maintenance, great customer service...can't argue with anything at all.857266

Click to Enlarge

2015 Frontier Crew cab Desert Runner (purchased the yellow Sumo Springs). Easiest install ever! 18mm deep socket and long breaker bar for breaking nuts loose. Removed factory bumpstop, install sumo bracket and retighten U bolts to 58 foot pounds. After installing both brackets, lifted back of truck up 4 inches to install sumo spring with blue lock tight on bracket bolt, tighten sumo spring onto bracket and lowered truck off the jack. Overall it raised the back of my truck bed 1 inch. Ride is stiffer with no bed roll in the turns. Loaded my 24 foot travel trailer with load leveler- equalizer bars and gained 3 inches (less “squat”.) Truck is level now vs nose high (without the sumo springs). Definitely an upgrade that was needed in 2015 when I first bought the truck!!!948839

Click to Enlarge

by: Eric 04/18/2024

After a year, very good suspension enhancement. The initial install was a pain only because I sheared the factory bolt in the original bump stop trying to remove it. Had to drill out and re-tap for new Sumo spring bolt.1769220

Just installed the Sumosprings on my 2022 Tacoma,easy install, took about a hour.Truck rides the same with no load on it and will see how it does next time I tow the trailer.Shipping was fast and well packed.1492082