bing tracking image
  1. Tonneau Cover
  2. Retrax
  3. Retractable - Powered
  4. Low Profile - Top of Bed Rails
  5. Rack Compatible
  6. Aluminum
THIS ITEM IS NOT A FIT FOR
2005 Lincoln Navigator
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Retrax

PowertraxPRO XR Hard Tonneau Cover - Powered - Aluminum - Accessory T-Slots

Part Number: RTT-90402
In Stock
$3,099.99
Tonneau Cover
Not Confirmed to Fit

2005 Lincoln Navigator

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Heavy-duty, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails. Install crossbars (sold separately) in the slotted rails to carry bikes, kayaks, and more above your bed. Great Prices for the best tonneau cover from Retrax. PowertraxPRO XR Hard Tonneau Cover - Powered - Aluminum - Accessory T-Slots part number RTT-90402 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (5)
  • Q & A (0)
  • Videos (1)
  • Photos

Retrax Tonneau Cover - RTT-90402

Highlights

  • Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
  • Open Hands-Free: Remote key fob opens or closes cover with one button press.
  • Keep Cargo Locked Down: Hard aluminum cover secures gear when tailgate is locked.
  • Use Racks Above It: Built-in T-slots fit most T-slot racks for bikes or ladders.
  • Stay Dry and Clean: Foam seals, drain tubes, and overlap keep water and dust out.
  • Load Heavy Gear: Supports 500 lbs evenly; 1" thick aluminum resists impacts and dents.
Made in USA

Features to know about

Hands-Full Convenience: Powered Retraction with Remote Key Fob

When your hands are full of tools or groceries, there’s no need to wrestle a latch or fold panels. The PowertraxPRO XR opens and closes at the press of a button on the key fob. Sealed ball-bearing rollers let the aluminum slats glide smoothly inside the rails without binding or needing lubrication. The built-in electromagnetic brake stops and locks the cover anywhere along the rails, so you can leave part of the bed open for long items while keeping smaller gear covered and secure.

Pair of PowertraxPRO XR remote key fobs for opening and closing the retractable tonneau cover via wireless control.

Truck bed with ladder extending out while PowertraxPRO XR tonneau cover stops partially closed to secure shorter cargo.

All-Weather Confidence: 1" Thick Aluminum and Sealed Protection

Rain, snow, and dust stay out thanks to weather stripping and foam seals on all sides, plus a top panel that overlaps the tailgate. The 1" thick aluminum slats have the strength to handle up to 500 lbs of evenly distributed weight when rolled out. The matte black finish resists scratches and fading, keeping the cover looking sharp through years of sun and storms. Drain tubes built into the canister route any water away, so the stored cover stays dry and mildew-free.

Close-up of PowertraxPRO XR bulkhead weather seal showing rubber and foam strips preventing water and dust entry.

Close-up of PowertraxPRO XR drain tube routed from canister to truck bed floor for water drainage and moisture control.

Rack-Ready Flexibility: Built-In T-Slots for Extra Gear

The integrated Trax Rail System makes it easy to mount T-slot-compatible racks and accessories. You can haul bikes, kayaks, or a roof box above the bed without interfering with how the cover opens and closes. That means more space for cargo underneath and full use of your rack setup when you need to load up for work or a trip.

PowertraxPRO XR Trax Rail System with mounted crossbars showing T-slot compatibility for racks above retractable cover.

Low-Profile Fit: Streamlined, Space-Saving Design

The canister tucks neatly at the bulkhead with an angled bottom that leaves room to slide cargo below it. When closed, the cover sits just 1" above the bed rails for a clean, flush look that complements the truck’s lines. The design reduces wind drag and helps improve fuel economy while keeping the bed protected and organized.

PowertraxPRO XR compact canister at bulkhead showing minimal bed space usage with angled bottom for extra storage room.

Cutaway view of PowertraxPRO XR storage canister showing internal spiral track system for smooth cover retraction.

Truck tailgate open with PowertraxPRO XR tonneau cover closed showing independent operation and secure bed coverage.

PowertraxPRO XR tonneau cover rolled out flush with canister showing smooth low-profile design for streamlined look.

Truck with PowertraxPRO XR tonneau cover installed showing matte black low-profile design and durable aluminum construction.

PowertraxPRO XR tonneau cover extended over truck bed with 5th-wheel hitch showing low-profile clearance compatibility.

Bright Access After Dark: Built-In LED Cargo Light

A small LED light on the canister lets you see inside the bed when you’re loading gear at night. It’s controlled by the same key fob as the cover, and an automatic shutoff after 3–5 minutes prevents battery drain. With the tailgate closed and the PowertraxPRO XR locked, your cargo stays easy to reach, well-lit, and safely out of sight.

Built-in LED cargo light on PowertraxPRO XR canister showing illumination control for night visibility inside truck bed.

Specs

Weight and Capacity

  • Weight capacity: 500 lbs evenly distributed

Cross-section of PowertraxPRO XR tonneau cover showing sealed ball-bearing rollers inside side rails for smooth powered retraction.

Dimensions

  • Canister dimensions: 13-1/2" deep x 12" tall

Installation diagram of PowertraxPRO XR tonneau cover showing canister and side rail assembly points for setup guidance.

Warranty

  • Limited lifetime warranty

T-90402 Retrax PowertraxPRO XR Hard Bed Cover w/ Trax Rails - Electric - Retractable - Aluminum - Matte

Installation Details RTT-90402 Installation instructions

This Product Fits The Following Vehicles




Video of PowertraxPRO XR Hard Tonneau Cover - Powered - Aluminum - Accessory T-Slots
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for PowertraxPRO XR Hard Tonneau Cover In-Depth Review and Installation

Hi, everyone. Jesse here with etrailer. Today we'll be taking a look at the Retrax ProTrax Pro XR powered hard tonneau cover. Obviously, adding a tonneau cover is a great way to protect whatever you're storing inside of your bed. And if you're really trying to protect it, especially from thieves that can come through if you have a soft tonneau cover and just slice that open and grab whatever's inside, I always recommend having a hard tonneau cover. This tonneau cover comes with the plus that it will open and close just by using the included key fob here.

So as you can see, it's going to open up pretty quick for you so you can grab whatever you want out of your bed or even open up your tailgate. Another really great feature of this particular tonneau cover is the T-slot here. So you don't have to worry about custom fabricating anything to get your accessories, whether it be some lights or even a ladder rack installed. They'll just slot in very easily. And as I said, this is going to protect your truck bed from the elements.

So you have pretty substantial seals all around. Whenever it's closed up, I can't really see any rainwater getting in at all. And for any water that may collect up on top, you have two drain tubes down there that will just let that flow down beneath your truck. Another really cool feature of this particular tonneau cover is this light right here. Now, most modern trucks will have lights on the back, but you don't really have any lighting towards the front.

So that's where this comes in handy. If you're trying to unload or load up your truck bed at night, you have a nice light right there to really let you know what you're looking at. This tonneau cover comes with two key fobs, which feel pretty high quality. And you only have three buttons here, so pretty simple. You have O for open, C for close, and then this logo down here is to turn on the light.

Really, that's about all there is to it. If you're looking for a really high quality tonneau cover that's going to be really convenient and easy to use, then this is a great option for you. If you have any questions or concerns about if this tonneau cover is the right fit for your truck, then feel free to reach out to us. We'd be happy to get you pointed in the right direction. When it comes to the installation with this, since it is powered, that does mean you're running a wire from the bed of your truck up to your battery, but there's no splicing or anything involved. You're really just tying it into your battery and then you're ready to go. If you're not looking to get this set up yourself, then check out our installer locator. You can find someone local to you that'll be happy to sort that out for you. If you are looking to see how this gets installed then follow along, and I'll walk you through the process. We'll begin our installation by getting our power cable set up. So the end with two ring terminals on it, that's going to go up into our engine bay. So what I did was just ran a piece of airline tubing down from the engine bay so that I can pull this up. So I'm just going to use some electrical tape and get these taped to this line and pull it up. If you don't have airline tubing, you can just use a clothes hanger, just whatever you have that you can use to fish some wires up. So as I said, we're going to pull up on our airline tube, then we'll just take that tape off and we are on the driver's side because that's where our battery is. So we can pretty easily make our two connections here. So we'll start with our black wire, which is our ground. That's going to go to the negative side of our battery. This nut is a 13 millimeter. (drill grinding) Just remove that. And then we'll slip this ring terminal right over that post and reinstall that. (drill grinding) And the red wire will go to the positive side and always double check to make sure that there's no fuse in it, which there actually is one installed. So I'm just going to take that out. That'd be kind of the last step in our installation is reinstalling that. But on our positive side, I'm going to go on this post right here. And once again, that's a 13 millimeter. (drill grinding) We're going to try to route this around just so we can reinstall that cover once we're done. (drill grinding) Then we just routed our wire back, just kind of following the frame rail on the truck. There's an existing wiring harness there that you can zip tie off to every couple feet or so. And then I use the same fish wire technique to get it up through this hole here. There's a plastic cap. I just used a flathead screwdriver, popped that off. And what I'll do is I'm going to end up drilling a hole through this so we can reinstall it and then just covering it up with silicone to seal it off. Now we can start focusing on our canister and getting it set up to be installed. So when you pull it out of the box, we do have some things just for shipping that we need to remove. So this tube just kind of pulls out and we can throw that away. Then we have this plastic bracket here that's just held in by a Phillips screw. (drill grinding) So you take that screw out, kind of lift up on the cover and pull it out. We're going to have a set of these on both sides. You want to make sure that you just keep track of one of these brackets because we're going to use it as a shim later on. We can get our side rails installed to our canister. So just note that you have kind of a channel here and that's where our bearings are going to line up. So this does get kind of tricky. I'd recommend having something to hold the end of it or somebody helping you out. We're going to lift up on the cover and kind of guide those bearings through. And once you get those started, we're just going to make sure that our threaded holes are on the inside of this plastic here and just kind of slide it back until you can get those holes lined up. Once you get your holes lined up, you're going to have a bag with this bracket here. It's really just a support brace and then some longer screws than what come in your original packaging. And this is just going to slot in. Get that slotted in, and then we can feed our screw through and get that to start. It can be kind of tricky just getting all these things lined up, but once you get it started, it should thread in pretty easy from there. And once you get them both started, we're just going to snug those down. Now we'll take this trim piece, which has some rubber, that's going to be on the front side, so towards the cab. And this is going to slide right under both of our rails and kind of slot into place. And we have two counter sunk holes here, one on both sides. Just get that lined up and we can get our hardware threaded on. Once you have both lined up and started, we're going to use the included Allen wrench and get those tightened down. I grabbed my friend Daniel because you are going to need a extra set of hands. So what we'll do is just kind of get this lifted up onto our tailgate because our truck is quite tall. And now we'll just lift this up until we get towards the cab and we'll just get this kind of set down for now. We can make adjustments later on. One thing that's kind of tricky is as you're pushing this canister back, you do need this rubber seal to lay flat on top like this. So I just kind of went down the line while lifting it up and pulled that out from under, but just make sure that's all laying flat so you have a nice seal. So now I have our tailgate closed here and this is when we need those shipping brackets. This end is supposed to be 1/8 of an inch, so we're going to use that as a shim, as I said. So what we'll do is just keep adjusting this until right there where you can slide this in and out, but it's still butting up against it. Now we can get everything clamped down. So the way these clamps work is this is adjustable height wise here. I found that we we inchesre perfectly fine getting these installed in the lowest setting, which is how they came. But I already have three of the brackets installed and I'm finding on these front ones, it's really hard to get these brackets started. So what I did was unthreaded this bolt about as far as I can, just maybe one and a half threads left. And then what we'll do is this section here with the grooves is going to line up with our channel here and this kind of slots into our bed rail. So start with that bed rail side. And as you can see, we can just kind of work it on. But if you're really fighting it, you can just put your foot and push against it to get that started. As you tighten these down, what you want to do is kind of push down on the channel here and also tilt it this way. That's what they say in the instructions is that's going to create the best watertight seal. So just push down and tilt it and we'll get these snugged down. After you tighten them all down, one thing you'll want to do is if you did shift your cover around a little bit, close the tailgate up and just double check with those shims. But then once that's all set, what we'll do is measure from channel to channel or side to side, measure that at both of your brackets. So kind of compare those numbers. If there is any difference between the numbers, what you'll want to do is if your distance is greater, you'll want to tighten it down. So turn these adjustment tabs clockwise. And if the distance is less, you can turn them the opposite way and you will have to loosen up your brackets while you're doing that, but get those adjusted and re-tighten them down. With the bottom bolt here with the rubber on the end, what we want is that to sit snug against the inside of our bed. Not going to tighten it down too hard, just a couple turns. And then this nut here is our jam nut. So we'll just have to run this all the way back and snug that down so that holds this bolt so it's not moving around. Now in order to set up our drain tubes, which drain right around here, we do have drain holes almost directly below, which would be perfect, but they're a little bit too small of a diameter to get our hose through. So what I'll do is just use a step bit. You can use a regular drill bit, but I'll use a step bit to step that up to just about this diameter so I can push our hose through. (drill grinding) Now that we have our drain tubes set up, all we have to do is plug in our power cable down there. It's just a simple two-prong plug that plugs into each other. Then of course, reinstall our fuse. And now what we'll do is just kind of run everything through its paces. I already closed the tailgate, so we're just going to watch everything, make sure we have smooth movement, and then also check that we have a nice seal on our tailgate. Once you verify that everything's moving smoothly and sealing up, then you can relax because you've successfully installed your Retrax PowertraxPRO XR powered hard tonneau cover.

Ratings & Reviews

5.0

5 reviews
5 Stars
(5)
4 Stars
(0)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
Durable and reliable
by:
This was a easy in Friday instsll. Very few tools required. Pulling the power wires was the hardest due to crawling under the truck.
by:
I think it is the best. Purchase and delivery was a breeze with etrailer.
Bill F
by:
This is the perfect cover. Everyone who sees the cover wishes that they had spent a little more money and bought soemthing like this.
by:
5
5
true

See what our Experts say about this Retrax Tonneau Cover


Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Erin H
Updated by:
Erin H
Employee Mark S
Updated by:
Mark S
Employee Jason W
Written by:
Jason W

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924