To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
It’s easy to get to your gear with the Trifecta 2.0. The tri-fold setup lets you open the rear panel by flipping two spring-loaded EZ-Lock clamps, then lift the middle section for more room. When you need to haul something big, fold the cover forward and secure it with the built-in buckles to free up two-thirds of the bed. For full access, release the front Jaw-Grip clamps and lift the whole cover off in seconds. The design keeps things simple—no tools or rails left behind once it’s off.

Many covers need side rails or separate clamps that clutter the bed and take time to install. The Trifecta 2.0 is completely self-contained, with built-in clamps that store inside the frame. Just pop them down, hook them under the bed flange, and tighten. That’s it. When removed, there’s nothing left on the truck, so the bed looks clean and ready for work or weekend use.

Rain, dust, and road grime stay out thanks to the integrated snap-on rubber seals. The heavy-duty, leather-grain vinyl skin is permanently attached to the aircraft-grade aluminum frame, so it won’t loosen or flap in the wind. It’s been tested to handle extreme heat and cold without cracking or sagging. The powder-coated frame and fiberglass-reinforced nylon clamps add strength and resist rust for long-term durability.

The lightweight frame and bows are made from aircraft-grade aluminum with a black powder coat finish. The MAX double-pivot hinges are rugged and reinforced for better support when folding. Combined with the vinyl tuck system and sewn perimeter, the cover holds its shape and tension while keeping a smooth, low-profile appearance about 1" to 1-1/2" above the bed rails.

Installing this cover doesn’t require drilling or extra hardware. The pre-installed Jaw-Grip front clamps attach directly to the bed flanges without damaging the cap, while the spring-loaded EZ-Lock clamps at the rear snap securely into place. Once the clamps are locked and the tailgate is closed, the bed stays secure—no separate locks or tools needed.


Ratings & Reviews

Lazer S.
1/27/2026
Sorry to hear that, Craig. I can't say I have heard of one of these failing so quickly, so I am surprised. That said, the picture you sent is of a hard folding cover and what you ordered is a replacement for a soft folding cover. Is the picture of a different cover? And then also, can I ask who you contacted exactly? I checked your account and your email address, but I could not find anything sent in. Did you use a different email address by chance?

Paul L.
6/17/2020
Very happy with cover, was very easy to install. Keeps everything in bed dry and hidden. Easy to remover for larger loads. Looks great still. All in all was a fantastic experience with product!

Kyle
3/27/2020
Product worked great for the time that I had the truck it was on. The material didnt fade from the sun and it never tore or scratched if something hit it. I definitely would purchase again.

Burnie S.
12/11/2016
It is a good product. I really appreciate the ease to open the cover when you need an open truck bed

Cliff B.
6/7/2019
Still love it, Still working great.

Kate F.
4/9/2026
I am very sorry to hear that install was more difficult than anticipated. A lot of companies do have an install policy, it was on there for more than one day which is why we can't take it back. Once again, my apologies that you are not more pleased with the cover, this is not the typical feedback I get on this product.


Rdw
10/29/2021
still remains in like new condition after another year and another Maine winter.

Mike B.
8/28/2018
One of the best quality tonneau covers I have owned. Still holding up great after a year.

Jenny N.
12/9/2021
I reached out to Extang about the cover. The covers are designed to cover the inside dimensions of the bed. You will want to make sure that the cover is centered on the bed itself. Sometimes it seems like the cover should be closer to the cab window and that is not the case. You will want to make sure that it is centered. Also, the cover also is not always designed to cover the stake pockets.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Ken
5/26/2026
its good, still wish the quick releases were on all 4 corners. real pain to reach in for front releases