pewag Tire Chains - PWRS74

Just make connections and drive - these chains will automatically tension with the flip of a switch. Provides consistent traction in snow and light ice for your vehicle. Diamond pattern delivers a smooth ride and square links bite into ice.

Features:

• Provides excellent traction in snow and ice
  • Square links dig in and provide good grip - small size makes for a less bumpy ride
  • Diamond pattern offers constant traction and a smoother ride than ladder patterns
• Made for passenger vehicles with limited wheel-well clearance
  • Meets SAE Class S standards
• Automatically tightens around tire as you drive - no need to stop and tension
  • Make connections and engage the ratcheting device to tighten each chain
  • Drive off and chains will self-tension for a perfect fit
• Protects wheel rims with plastic bumpers
• Resists corrosion thanks to high-quality titanium alloy steel construction
• Includes durable storage case

Specs:

• Fits: 14" - 18" tires (for exact sizes, see below)
• Link thickness: 3.2 mm
• Quantity: 2 chains
• 90-Day warranty

Note: To determine whether you can use snow chains on your vehicle, and how they may affect your ABS/EPS functionality, consult your owner's manual.

The pewag Servo RS self-tensioning tire chains are great all-purpose, winter weather chains. If you live in an area where you're likely to get periodic snow and ice, these chains are perfect because they're durable, easy to mount, and give you constant traction - and they're lightweight and compact, so they store in your vehicle nicely too. If you're more likely to see seriously icy conditions, you might want to get a chain with V-bar links that can bite into the ice you need to give you maximum traction.

These chains are among the easiest and fastest to install. Unlike other self-tensioning chains, the Servo RS have tensioning devices built into the side chains so there's no need to route additional tensioners when you install them. Just make a couple connections, move the button on the ratcheting device to "drive," and you'll be able to see the chains begin to tension. Because they self-tension more and self-center as you drive, these chains will give you a perfect fit, no matter the profile or wear pattern of your tire. Plus, you only have to get out of your vehicle one time - once they're installed, there's no need to drive forward, stop, and check their tension.

Class S Designation

SAE Class S tire chains are designed for use on passenger vehicles with restricted wheel-well clearance. Most newer cars, vans, and small trucks - especially those with large aftermarket tires - will require Class S chains. If you're unsure about the class of your vehicle, consult your vehicle's user manual.

These chains will fit your tires provided there is both:

• A - a minimum of 1.46" (37 mm) between the top of the tire tread and the wheel well
• B - at least 0.59" (15 mm) between the tire's sidewall and the vehicle

Confirming Your Fit

If you know your tire size, you may think you won't need to test fit your new chains. But there are a lot of variables that can affect whether chains will fit your specific tires, including your tire type, the amount of air pressure in the tire, the amount of tread wear, and the tire manufacturer. You'll also need to know how much clearance is in your wheel well, which you can determine by measuring from your tire tread to the side wall of the wheel well.

We recommend that you order chains as early in the season as possible to give yourself plenty of time to test fit the chains and reorder if needed. This way, you won't be stuck out in the cold later with snow chains that don't fit.

You can test fit these chains in your garage or driveway, but you'll want to wait until there's snow on the ground to actually drive with them. Likewise, if you're out in the snow and come across bare pavement, you'll want to pull over and remove the chains. Even these low-profile chains can cause damage to the bare pavement, your garage floor, or your vehicle if they break from the wear of riding on a harsh surface.

Installing Snow Chains

Installing these chains is simple.

1. Lay out the chains on the ground to make sure there are no twists or kinks.
2. Slide the chain behind the tire and connect the ends of the cable, which will sit behind the tire.
3. Connect the inner chain to the outer traction chain at the bottom of the tire using the large red hook, then activate the servo device to ratchet the chain tightly into place.
4. Once all the connections are made, move the switch on the ratchet back to "drive." The rachet will tension the chains, then center and fully tighten them on your wheels as you drive forward, giving you a perfect fit.

Removing the chains is as quick and easy as putting them on. Just move the switch to "open," pull the cable to give the chains some slack, and disconnect.

Quick Tips:

• Lengthen the life of snow chains by drying them after each use before you store them.
• Check out our installation kit with safety lights and a kneeling pad (PO34FRK) to make things a little easier when you're installing chains out in the snow.

How to Choose Snow Chains for Your Vehicle

To choose the right snow chain, you must match your tire size. Those measurements can be found on the side of your tire.

185/60-15

1. (185) - indicates tire width in millimeters
2. (60) - gives you the aspect ratio (sidewall height as percentage of width)
3. (15) - denotes the diameter of the wheel rim in inches

RS 74 pewag Servo RS Self-Tightening Chains - Passenger Car Vehicles - 14" - 18" Tires - Qty 2

Replaces pewag RS74

These chains fit the following tire sizes:

• 185/75-16
• 195/75-15
• 195/80-14
• 205/55-17
• 205/60-16
• 205/70-15
• 215/45-18
• 215/50-17
• 215/55-16
• 215/65-15
• 215/70-14
• 225/40-18
• 225/45-17
• 225/50-16
• 235/40-17
• 235/40-18
• 235/45-17
• 235/55-15
• 235/60-14
• 245/40-17
• 245/45-16