Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re hauling serious weight, this wheel delivers confidence mile after mile. The Lionshead Steel Dual Wheel measures 17-1/2" x 6-3/4" and carries a 6,200-lb capacity. Its sturdy steel construction and 5.59" offset are made for demanding dual-wheel setups where stability and strength matter most.
Corrosion doesn’t stand a chance here. This wheel is finished with an e-coat primer and a durable black powder coat applied to both sides, sealing out moisture and grime. That extra layer of defense keeps the wheel looking clean and performing strong even after long exposure to the elements.
The built-in offset makes this wheel a versatile choice for dual positions. Use it as the inner wheel to bring it closer to the frame or flip positions to set it outward—either way, the geometry stays balanced for consistent performance. It’s designed specifically to handle both roles in a dual configuration without compromise.
This wheel centers on the hub—not the lugs—so it mounts solidly every time. The hub-piloted design requires flange nuts (sold separately) for proper installation, ensuring a snug fit that reduces vibration and keeps load forces distributed evenly across the hub face.
Every detail meets strict SAE J1204 requirements for durability and performance. It’s built from heavy-duty materials, features an 8 on 275 mm (8 on 10.83") bolt pattern, an 8.7" pilot diameter, and uses 5/8"-18 lug nuts. With a lifetime structural warranty behind it, this wheel is engineered for years of dependable service under serious load conditions.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com. Let's take a brief look together at this Lionshead Black Steel Dual Wheel. This heavy duty steel wheel with four handholds, and let me point those out there for you, we got two handholds here and two handholds there, is designed for use on dually trucks, buses, and trailers. This wheel does have a high offset, so this is going to allow you to use this wheel as either an inner wheel in this position or an outer wheel in this position on a dual wheel set up. Now the offset is either a positive or negative 5.59 inches.
And this steel wheel is going to be very sturdy for you. It's corrosion resistant. It features a rust resistant finish that includes an E-coat primer, and a black powder coat on both sides. And this is a hub piloted wheel, which means that it will center on the hub of the axle, not on the lugs. The pilot hole diameter is 8.7 inches, and this does require the use of flange nuts for installation.
We do sell them separately here at etrailer.com. This does use a wheel lug size of five eighths of an inch by 18 flange nut. And as you probably already saw, let me bring this around here so you can see again, located right here is the metal valve stem, so that is already installed. This wheel does meet SAE J1204 standards. And the diameter of this wheel, measuring inside to inside, is 17 and a half inches in diameter.
And then that width, again, measuring inside to inside, where that tire is going to sit on the wheel, is six and three quarters inches wide. This has a bolt pattern of eight on 275 millimeters. And in case you don't know, the first number in the bolt pattern is indeed the number of bolt holes. And then the second number is the diameter of the circle on which those bolt holes sit. So to determine the bolt circle diameter on wheels with an even number of bolt holes as we have here, you're simply going to measure from the center of one bolt hole to the center of the hole that sits directly across from it.
This wheel does have a capacity of 6,200 pounds. It does also feature a lifetime structural warranty. And this wheel does come with complimentary roadside assistance for two years. So if your RV or trailer happens to have a flat tire, you simply call their helpline and a technician will come and change the flat for you. And you can call that helpline 24 hours a day, seven days a week, and 365 days a year from anywhere here in the United States, Canada, or Puerto Rico. Well, that's gonna wrap up our real quick look today. I do hope that our time together was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Jenny N.
1/28/2023
I will definitely have our Customer Service team reach out to you. The pilot hole diameter for this rim is 4.77 inches. There can be minor variations with the pilot hole dimensions just due to the manufacturing process. Keep in mind that this wheel is hub piloted, which means that it centers on the hub, not the lugs.