Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re hauling heavy gear and need a wheel that won’t flinch, this 14" x 5-1/2" aluminum wheel is rated for 2,200 lbs and meets DOT specifications. It’s strong yet lightweight for dependable towing strength without extra weight drag. The 0 offset design keeps pressure balanced on the hub for long-term reliability.
Corrosion can quickly ruin a good wheel, but this one is built to stay sharp. The matte black finish is rustproof aluminum with a clear coat on both sides to protect against scuffs and scratches, even in damp or salt-heavy conditions. It holds its look and structure season after season.
Loose lug nuts are a headache no one needs. Steel inserts in the lug nut wells keep the wheel securely in place and prevent wear around the holes. That means you don’t have to constantly retighten your lugs just to feel safe on the road.
A wheel upgrade should do more than just fit—it should look right. The open-spoke design with a machined face gives this wheel a modern, high-end appearance that instantly freshens up any setup. It’s a sturdy wheel that looks every bit as solid as it performs.
Matching up your new wheel is simple with clearly stated specs—5 on 4-1/2" bolt pattern, 3.19" pilot hole diameter, 1/2"-20 wheel bolts, and zero offset. Everything is designed for a precise fit and confident installation backed by Americana’s two-year limited warranty.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Americana 14 inch by 5 1/2 inch AM03 series matte black machined aluminum trailer wheel with the 5 on 4 1/2 inch bolt pattern. Now this is an aluminum wheel. It's very durable, lightweight, and rustproof. And as we mentioned, this is the AM03 series wheel, which you can see is an open five spoke design in a black finish with a machine silver face on the spokes edges provides a nice, bold, sleek look. The black finish, if you notice it is a matte black finish, has a clear coating on the front and even on the back of the wheel to help protect the finish.
The diameter on the wheel itself, we're gonna measure it. If you measure the diameter is always measured inside the inside, and this is 14 inches. So if we take our tape measure, and you can see if we go across inside the inside's 14 inch diameter, the width on the wheel is gonna be the same way. It's bead seat to bead seat, or inside to inside. So again, five and a half inches on the width.
Now the bolt pattern on this wheel is a 5 on 4 1/2 inch bolt pattern. And if you wanna measure your bolt pattern on a wheel, that's an odd number of lugs, like in this case, five, the holes don't actually line up across from each other. So what you'll have to do is pick either one of these holes. So let's say we pick this one and then you're gonna measure across to either one of these holes that are right across from it. But the trick is when you measure, it's from the center of the starting wheel to the furthest edge of the wheel that you go, or the hole that you go to.
So when you measure that on this wheel, it'll be 4 1/2 inches. So that's a 5 on 4 1/2 inch bolt pattern. The wheel lug size, this uses is 1/2 inch by 20. The weight capacity on this wheel is 2,200 pounds. Now one of the nice features I like about this wheel is in the lug nut wells right here.
If you notice, they use steel inserts in the lug nut wells, and that's a nice feature 'cause it helps keep the wheel securely in place on the hub when you tighten your lugs down, prevents the holes from elongating or wearing down, and it eliminate the need for constant tightening of your lug nuts. If you notice the center cap is not included. If you do want those, we sell those separately on a website. When you did a center cap, you wanna make sure to get the correct cap that has the correct diameter to fit this pilot hole. Pilot hole on this wheel is 3.19 inches. This wheel does meet the DOT Department of Transportation specifications and the SAE J 25 30 standard. But that's gonna do it for the review on this Americana 14 inch by 5 1/2 inch AM03 series matte black machined aluminum trailer wheel.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
Kate F.
8/10/2026
Thanks for including the picture Carlos! New wheel looks great!
Claire H.
6/10/2026
Those new wheels look spiffy! Thanks for sharing a photo with us!
Kate F.
2/11/2026
Wow Harold, those wheels look great! I love the color of your boat too! Where do you mainly take your center console fishing boat out at, and what are you mainly fishing for? We have a Ranger, and like to dabble in some local bass fishing tournaments at the Lake of the Ozarks and Mark Twain Lake here in Missouri.
Jerred H.
9/23/2026
That does look pretty good Brock! Thanks for sending in that picture! Let us know when you're ready to swap out the other wheels.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
4/10/2026
Wow, those wheels look great on the horse trailer David. What kind of horses do you have?