When you’re locking down a heavy axle, you need a plate that can handle the load. This U-bolt plate is designed for 7,500-lb solid-bar axles, giving your suspension a firm and reliable connection point. It keeps the axle and leaf springs tight under weight so your trailer tracks steady mile after mile.
Getting the fit right makes all the difference in how the suspension works. This plate matches round, 2-1/2" diameter trailer axles and 2" wide leaf springs, so everything lines up cleanly. The bolt hole spacing—2-5/8" side to side and 3-1/4" front to back—makes it easy to position the U-bolts and clamp the assembly down securely.
A solid connection starts with strong hardware. This plate uses two 9/16" diameter round U-bolts (sold separately) to grip the axle and spring pack. The size and layout are made for dependable clamping force, keeping the axle locked in place even when the road gets rough.
If your setup uses 1-3/4" wide leaf springs instead of 2", this plate still works with the right U-bolt. The small 1/8" gap doesn’t affect the clamping ability, so you can count on a secure fit without compromising strength or stability.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at a U-bolt plate for two and a half inch diameter round trailer axles. Now, this plate is used with U-bolts to secure an axle to the leaf springs, which are mounted to the trailer frame. It attaches with two, nine-16th inch diameter round U-bolts. U-bolts are sold separately and available at etrailer.com. It fits round trailer axles with a two and a half inch diameter. We can tell that by taking a measurement from the edge of this hole to the edge of that hole.
So, we place a ruler on there, and we take that measurement, we can see that that measures right around two and a half inches.This is designed for use with 7500 pound solid bar axles. It works with two inch wide leaf springs. The plate is made from a durable steel construction. And it gives us a measurement edge to edge this direction of about six inches by four inches.That's gonna do it for today's look at the U-bolt plate for two and a half inch diameter round trailer axles.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.