A stable connection starts with the right hanger. This front hanger is designed specifically for 10,000-lb and 12,000-lb Dexter axles, giving your suspension a strong, reliable base. It’s built to handle serious weight so your trailer suspension can do its job without flexing or shifting under load.
Proper spring alignment keeps your trailer tracking straight and smooth. This hanger works with 3" wide slipper springs, holding them at the correct height and angle so they move freely through the suspension cycle. The fit is dialed in to keep things tight and consistent mile after mile.
Ride height matters when you’re balancing load, clearance, and stability. At 6-1/4" tall, this hanger sets the right geometry for heavy-duty spring setups. It suspends the spring securely from the trailer frame, helping keep the suspension level and predictable.
Big loads need big hardware. This hanger is drilled for a 1" diameter bolt (sold separately), giving you the strength and surface area needed for a solid connection. It’s made to hold tight even when the suspension is working hard over rough ground or long hauls.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Dexter front hanger for three inch wide slipper springs. This front hanger provides the attachment point for the leaf spring, and suspends the spring from the trailer frame. It is a weld on installation. The holes here at the top are for spot welds to hold it in place. Again, it's made from a durable steel construction. It is designed for trailers with 10,000 pound and 12,000 pound dexter axles.If we take an internal measurement of the opening here, just the width measurement, you can see that that measures about three inches wide.
So, again it is designed to fit three inch wide slipper springs. And it works with a one inch diameter bolt, which is sold separately. Edge to edge this direction, you can see that it measures five inches. And then from bottom to top, measures around 7-1/2 inches tall.That's going to do it for today's look at the Dexter front hangar for three inch wide slipper springs.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.