Video Transcript for Replacement T-Handles for JT's Strong Arm Jack Stabilizer Kits Spec Review

Presenter Hi there, JT Strong Arm owners. Today, we're gonna be taking a look at a replacement t-handle for the JT Strong Arm stabilizer system. You'll receive two in a pack, so you have enough to replace two, or if you just lose one, you'll have a spare laying around for that next time. Now, because these t-handles can fully unthread and come out of here, it is possible that you could lose the handle. And this is often a case, depending on how you're traveling when you store it, because when you go to lift your jacks up, you have to have the handles in the loose position to allow the shaft to retract inside of the JT Strong Arm. So we can see here that when we retracted it, our arm went inside of it, that's why we had to leave it loose.

And when we get all the way up, a lot of times you just don't even think about it. You drive off, you forget it's loose and it can vibrate out of there, it can just unthread itself. So I recommend that you tighten it down once you're all the way up, so that way it can't vibrate itself loose. So we've gone ahead and lowered it back down here, and you can see that without the t-handle in there and tightened down, the system really just kind of falls apart. It no longer functions the way it's supposed to, because we've got tons of play in here.

So if we're rocking back and forth, the shaft is going to extend and then retract on itself. It's not actually gonna provide any support. So if you find yours missing, I highly recommend that you pick up a set of replacements so you can restore that lost stability and enjoy a rock-solid camper. And that completes our look at JT Strong Arm's replacement t-handles..