To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you need to haul taller cargo or just want open bed space, this cover rolls up easily and secures with built-in latches. The soft design keeps things simple—no folding panels or heavy parts to lift—so you can switch from covered to open in seconds. Because it mounts inside the bed rails, you still have full use of your tie-downs and stake pockets for securing loads.
The cover is built from textured, matte black vinyl supported by aluminum side rails and bows. This pairing keeps it light yet strong, so the surface stays tight without sagging. Weather seals along the edges keep out rain and road dust, helping to keep gear dry without the need for drain tubes.
Nobody wants a loose or wrinkled cover flapping in the wind. The manual tension control lets you dial in just the right amount of stretch so it stays flat across the bed. Even after long drives or changes in temperature, the cover keeps that low-profile look—just 1-1/4" above the bed rails—so it blends smoothly with your truck’s lines.
You don’t need drills or complicated tools to get this one installed. The clamp-on system mounts inside the bed rails for a secure fit and a clean finish. Once clamped down, you simply roll out the cover, latch it at both sides of the tailgate, and you’re ready to hit the road with your gear protected and out of sight.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, Matt with etrailer, and today we're talking about the line of etrailer soft roll-up tonneau covers. And this is gonna be on our GMC Sierra today, but this is going to come in multiple variations or fits, so what I recommend doing, is just plugging your vehicle's information into our fit guide to find what's gonna be the best fit for you. This is gonna be a soft roll-up tonneau cover, and you're mainly gonna have two types, and you're gonna have your hard tonneau covers and your soft tonneau covers. Your hard tonneau cover is gonna be more for security. So if you have anything really important in the back, this would keep those items secured so no one can access them. While the soft tonneau cover like we have today, is just gonna keep things more out of sight and outta mind.
So, I'd recommend keeping things less valuable back here, but it's also gonna be a lot easier to work with, being able to roll it up completely, save a little bit of extra space, and it's still gonna give you a lot of the same benefits giving you a clean finish on top of your truck, and we're gonna help you with that fuel economy too. This is a roll-up style, (tailgate thudding) so, how that's gonna work is you're just pulling these levers, (cover thudding) and release this. And since this is soft too, (fasteners scratching) it really binds into itself really nice. (fasteners scratching) You really start to notice it at the very end when I have it right here next to our truck, or the cab of our truck. And how that's gonna operate is when you have any boxes, maybe you wanna push all the way back here, this is gonna have the ability to really push into itself.
So if you are a little crammed for space, you should should still be able to maneuver this a little bit. And you're gonna secure this down. You have a couple buckles that you'll just wrap it around and secure to the other side. And this is how it's gonna be when you're in the open position, (buckle clicking) and you can tell this gives you a really good fit. I only have one one on right now, but I'm not worried about securing this at all.
(buckle clicking) And if you need to tighten it down a little bit more, if you've noticed things have shifted a bit, you can just adjust these buckles and give this a tight fit. If you are looking at soft tonneau covers, you're gonna have two choices. You're gonna have those fold-up options and you're gonna have those roll-up options. Both of them are gonna give you that protection on the back of your bed from any elements from outside, like rain, and they both are gonna give you more of a clean finish on the back of your vehicle too. Now, one of the major drawbacks to a fold-up tonneau cover is you're only gonna have two thirds of your bed that you can really use or access.
The roll up tonneau cover really solves that issue because it's gonna be able to roll up into itself, giving you a lot more bed access. And it's really my choice of a roll-up tonneau cover, because like I just said, it's gonna give you more room. We can take a deeper look at how this is all gonna work. So we're gonna have these clamps that are gonna attach your rails, to your bed rails. And what I really like about these clamps is they don't require any tools. It's just a knob on here (knob clicking) that you tighten up. And so if you ever needed to remove your entire tonneau cover, you wouldn't need any tools to do that. And how those rails are gonna sit on top of your bed rails, if you notice at the very back, we're gonna obstruct our stake pockets just a bit, so if you are wanting to use these, this might be an issue for you, so definitely reassess what accessories you have. And right next to that, we're gonna have this tensioner. I'm a big fan of this tensioner because with a vinyl tonneau cover, it's eventually is gonna start to stretch, that's with any soft type of tonneau cover. So what this does is you can adjust this really easily to help keep that tension on your cover. And you can really see what I'm talking about when I start to unroll this, (cover flopping) because right now it looks pretty loose, you can see a lot of wrinkles in the tonneau cover itself, but once I get to the very end, the way this is gonna really seat into (tensioner clicking) that tensioner, it's gonna tighten itself up. Removing all those wrinkles. Giving you that more smooth look on top. And afterwards, just come back through the sides and apply pressure to the hook and loop system we have on our bed rails, so we can really secure our tonneau cover to the rails. I know I talked about this being weather resistant, so let me show you what I'm talking about. So we're gonna have this rubber seal at the very end of the tonneau cover that'll press up against your tailgate. And next to that we're gonna have these foam gaskets on our corners, along with some additional padding going down the sides. And one of the things I really like about it is we're gonna have these aluminum rods that go all the way across, and kind of makes this bow up a little bit, and that's gonna help with water runoff so you don't have it pooling on top of the cover. Now no cover is completely waterproof. You're always gonna get a little bit of water getting into your tonneau covers, but I think for this one being a soft tonneau cover, it's gonna do a really good job with it. This is actually one of our coworkers, Dan's truck, and he's been driving around with this tonneau cover for a bit. He really likes it, especially with the amount of water it is keeping out. And it is flapping around in the wind just a little bit, but that's gonna be something you face with any soft tonneau cover, 'cause as you can see, just that material is just gonna wanna really move to any high winds you drive through. But that's pretty common with any soft tonneau cover. And honestly, I think the soft roll-up tonneau covers are gonna do most people just fine, because if you are just looking for that basic weather protection, this is gonna get the job done. Well that's just a look at the line of etrailer soft roll-up tonneau covers. Thanks for watching.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Easy install, low profile. Perfect replacement for my worn out Truxedo soft cover.
I'm giving 5 stars, because I knew what I was buying.
etrailer was awesome. The ordering and shipping process was seamless, I received several emails regarding the status of my order, and it was on my step when they said it would be.
As for the product itself, I did not have unrealistic expectations about buying a $200 tonneau cover. I just wanted something to keep the majority of the elements and prying eyes out of the bed of my truck. This cover does that. If you are overly obsessive with appearance, spend more money. The cover itself is straight and neat, but the fit and finish isn't. The lines of the cover do not sit with the lines of my bed. I had to scoot it rearward almost 2 inches so the cover would extend to the top of my tailgate. The weather stripping is just barely on the top of the front bulkhead and tailgate. I thought at first I may have received the wrong cover, but I made it work. I expected to need additional weatherstripping if I want a weather tight fit, and I was right. But as I said earlier, I knew what I was buying. This truck is 6 years old and over 100k miles. This cover will do what I need it to do without spending too much money.
While I gave you a 5 star, that is based on my satisfaction from purchases in the past. This shold be no diffrerent. The Cover was an exact fit, and the snap down was somewhat difficult, but maybe because it was 30Degrees when I put it on. However, it did "snap" i nplace, and was very tight. Looks good on my 2021 Chevy Colorado Z71, and only the test of time will tell if teh 5 stars stay or not.
Thank you for the videos as they convinced me that the eTrailer was the one to buyt for a few reason. Good value (Not the cheapest out there), Good Looks, God Revews,and a Great Warranty.
I will try and get some pictures posted soon
Easy to install. Fit perfectly on my truck out of the box but has easy adjustments. Went through the car wash, no leaks. Looks great! Really easy to unlatch and roll up. Exactly what I was looking for. Would recommend. Great product.
Very simple to install. Stretches tightly over bed with no flapping. Kept gear dry and no worries about anything blowing away.
Had to adjust to seal over tailgate by adjusting position further back.
The installation of the cover went well. Good instructions. When I finished and pushed the back of the cover down to the tailgate I was really impressed by the way the cover looked. Very professional looking. Etrailer is the best supplier for me.
I’m 62 and this is my first tonneau cover and I love it. It was so easy to put on and only took me about 10 minutes. It fits perfectly and keeps my stuff dry. Also shipped very quickly and packaged well. Thank you
Moving boxes to storage today in the pouring rain, I was so happy once again to have this vinyl cover. It has held up very well over this past year, with many trips to drop leaves and branches to our local composting place. I don't have to worry about things flying out on the road as I drive, and the tough vinyl has not punctured from tree branches. My only complaint is that the weatherstripping across the front behind the cab is not long enough to seal off water from running into the bed. The bow of the metal rib is high enough that the weatherstrip folds into the bed. If I adjust and move the front end closer, I don't have protection at the tailgate. A relatively easy fix to add a wider piece of rubber, but it would be perfect if they used a 4" wide piece of rubber.
Excellent. Fits perfect. Took me less than 15 minutes to unbox and completely install. The video was a huge help. Looks great on my 2026 Colorado Trail Boss. Worth every penny
I’ve had the roll up bed cover on my F150 for about a year now, and it is working great. I am happy with the durability and the ease of use of this cover. The price was right and I feel like this was a great purchase.
Great quality and value. Took me longer to get rid of the packing materials than installing the cover.
Perfect fit on my 2018 Silverado. Good quality product at a great price. Fast delivery. Always have had good luck dealing with trailer.
It’s a good tonneau cover. Seals good. When you roll it up the hardware design makes it a bit bigger than others. I had a rattling noise after installing it and took me a bit to find it because it sounded like it was in the cabin. It was the fastener for when you roll it up to keep it rolled up hitting my rear glass. I put a piece of Velcro patch on my window to stop it. The soft side. I’ll try to load a pic to show you. Installed on a 2026 Canyon you may find another way to stop the noise but it worked.
I like it,the looks,low profile, and overall clean look.I am skeptical about the velcro holding up over time.I see a lot of trucks going down the road with cover blowing because velcro isn't doing it's job.We will see.
The box arrived via UPS and the entire setup from receiving the box to having it fully on the truck was 18 minutes.
The instructions are very easy, and no extra tools are needed. The only tool you need is a hex key and it's included.
I found the initial connect from the frame rail to the front rail/tonneau was annoying because while you are doing that it's very easy to push a rail off the top edge which could probably scratch the paint on the bed if you aren't careful.
It didn't happen for me, but it's something to think about.
To avoid that you only really to be aware that it could happen and be careful, but having a helper hold the tailgate end, throwing a strip of painters edging tape or even loosely fitting one of the clamps which holds the rail to the bed at the tail gate end would avoid that possibility.
Other than that, it fits well, it feels well built and I'm really happy with the purchase.
Great cover! Super easy to install looks great! I will buy this one everytime!
Easy to install and uninstall. Keeps bed bone dry. Looks nice and flows well with the lines of the truck. And for the price, it's a really underrated value.
Great cover at a good price. Quality as good as more expensive covers. Easy to follow instructions. Good quality hardware. Install not too terrible, 30 minutes. Very happy with my purchase.
Just installed it today in a heated garage. Fits perfect. It took about 20 minutes to install.
Arrived in a very timely manner and was simple to install and a good fit.
Directions - well written & easy to follow! All hardware was intact and easy to use! I've installed many Tonneau covers over the years and this, for sure, was the fastest/easiest and it looks fantastic! Fitment is also perfect! Well done, e-trailer!!
Installation of the etrailer Soft Tonneau Cover was easy. I like that the tension adjustment blocks are conveniently located at the tailgate end. All the weather gaskets are integral to the system (no separate weather strips to apply separately and fall out of position, later). The special clamping brackets, unique to my Toyota Tundra, insert easily into the deck rail tracks and are secured with large hand knobs versus wrenches. Bonus! The rail tracks remain functional for subsequent cargo tie downs. Overall, very good fit on my 5.5 ft truck bed. See photos.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bill
9/20/2025
After a year the cover is working just fine. I like how it rolls up to the cab allowing full visibility through the rear window. And I can use the full truck bed when required.