bing tracking image
  1. Tonneau Cover
  2. Retrax
  3. Retractable - Manual
  4. Low Profile - Top of Bed Rails
  5. Rack Compatible
  6. Hard Plastic
THIS ITEM IS NOT A FIT FOR
1999 Ford Taurus
Retrax

RetraxONE XR Hard Tonneau Cover - Retractable - Polycarbonate - Matte Black - Accessory T-Slots

Part Number: RTX24YR
In Stock
$1,699.99
Retail:$1,749.99
You Save: $50.00
Tonneau Cover
Not Confirmed to Fit

1999 Ford Taurus

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Install crossbars (sold separately) in the slotted rails of this long-lasting cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo. Great Prices for the best tonneau cover from Retrax. RetraxONE XR Hard Tonneau Cover - Retractable - Polycarbonate - Matte Black - Accessory T-Slots part number RTX24YR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (34)
  • Q & A (0)
  • Photos

Retrax Tonneau Cover - RTX24YR

Highlights

  • Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
  • Locks Up Your Gear: Hard polycarbonate cover with a built-in lock keeps cargo secure.
  • Haul More Above the Bed: T-slot rails let you mount racks for bikes, kayaks, or ladders.
  • Full Bed Access Anytime: Retracts smoothly into a canister for quick open or close.
  • Stays Dry in Any Weather: Foam seals, drain tubes, and overlap tailgate to block water.
  • Tough and Low-Profile: UV-resistant Lexan and matte finish hold up from -50° to 200°F.
Made in USA

Features to know about

Secure Storage and Smooth Access: Retractable Polycarbonate Design

Many covers make you choose between convenience and protection. The RetraxONE XR Hard Tonneau Cover solves that with a retractable polycarbonate design that opens and closes in seconds. Sealed ball-bearing rollers glide smoothly along the rails without binding or needing lubrication, so you can access your gear quickly. The pop-up locking handle lets you secure the cover at any point along the rails, whether you need partial coverage or want the bed completely open.

Driver-side pop-up locking handle of RetraxONE XR retractable tonneau cover in use

Open handle and exposed keylock on RetraxONE XR retractable tonneau cover ready for operation

Closed locking handle of RetraxONE XR tonneau cover with protective lid concealing keyhole

RetraxONE XR tonneau cover locked partially open for mixed cargo access

Truck with RetraxONE XR tonneau cover closed and tailgate open to show independent operation

Built to Handle Weather and Impact: Lexan Construction with Embedded I-Beams

Harsh conditions and heavy loads are no problem for this cover. It’s made from high-quality polycarbonate (Lexan) reinforced with 5/8" thick aluminum I-beams every 4-3/4" for strength and impact resistance. It can support up to 200 lbs of evenly distributed weight and performs reliably from -50°F to 200°F without cracking, swelling, or fading. The matte black finish is scratch-resistant, UV-protected, and stays cooler to the touch on hot days.

Truck with RetraxONE XR matte black retractable tonneau cover highlighting sleek low-profile design

Rack-Ready Versatility: Built-In T-Slot Rails

If you haul bikes, kayaks, or work gear, the built-in Trax Rail System makes it easy to add crossbars or racks above the bed. The T-slots accept most Yakima, Thule, and Rhino-Rack accessories without interfering with the retractable cover. That means you can carry gear on top while keeping your bed covered and secure below.

RetraxONE XR tonneau cover with Trax Rail System and mounted crossbars for rooftop cargo

Keeps Cargo Dry: Sealed Canister and Drain Tubes

Rain and dust don’t stand a chance thanks to weather stripping and foam seals around the edges. The overlapping tailgate lip blocks leaks at the rear, while two drain tubes route water out of the canister through the bed floor. The spiral track inside the canister prevents the cover from rubbing against itself when retracted, helping it last longer and stay smooth in operation.

Close-up of RetraxONE XR bulkhead seal and weather stripping for water and dust protection

RetraxONE XR drain tube connecting to canister for water management system

Transparent view of RetraxONE XR tonneau cover rolled into canister showing spiral track design

Clean Look and Easy Installation: Low-Profile Mounting

The side rails sit just 1" above the bed for a streamlined look that pairs well with fifth-wheel setups or overland builds. The no-drill clamps make installation straightforward—attach the rails, secure the canister, and route the drain tubes. Once mounted, it’s a tough, low-profile system that keeps your truck looking sharp while protecting everything underneath.

Angled storage canister of RetraxONE XR tonneau cover showing compact design and drain tube connection

Close-up of RetraxONE XR flush-mounted tonneau cover showing seamless fit and smooth design

Truck bed with RetraxONE XR cover closed over fifth-wheel hitch showing clearance

Two-person installation of RetraxONE XR tonneau cover onto truck bed

Specs

Weight and Capacity

  • Weight capacity: 200 lbs evenly distributed

Dimensions

  • Canister dimensions: 13-1/2" deep x 12" tall

Cross-sectional diagram showing RetraxONE XR retractable tonneau cover roller system and rail mechanism

Warranty

  • Limited lifetime warranty

Installation diagram showing RetraxONE XR tonneau cover side rail and canister connection steps

T-60481 Retrax RetraxONE XR Hard Bed Cover w/ Trax Rails - Retractable - Lexan - Matte

Installation Details RTX24YR Installation instructions

This Product Fits The Following Vehicles




Ratings & Reviews

4.7

34 reviews
Review sort icon
Install crossbars (sold separately) in the slotted rails of this long-lasting cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo.

by:



by:

Looks good and feels sturdy



by:

Awesome product as it was easy to insta ll!



by:

Still works great. Been outside in the elements for a year. Looks and functions great.



by:

The install is complete. I'd prefer a hard copy of the directions. The little point and shoot QR code took me to the wrong cover. After a little work I did find the correct one. This added a good 30 minutes to the install time. Little trouble with the adjustment. I might have to adjust a little more in the days to come. I'm conservative with the 4 star rating. Time will tell, could move to 5. The MAJOR concern...the delivery company delivered it to the wrong address. Thankfully I have honest neighbors otherwise someone would have been out $[XX].

I'd have a conversation with the delivery company if I were y'all.



by:

Product very good. Drain plugs could fit better keeps popping out



by:

perfect fit. solid build. Fast shipping



by:

Installation went well. Quality workman ship.



by:

E trailer is great. But when the cover arrived and I installed it the cover had a hole in it or a small flaw



by:

I have seen this product on other trucks and liked it. It was fairly easy to install(some good videos on[line]) my son helped me, two people make it go faster and easier. Thanks for the good service and price.



by:

Shipping was fast. Everything arrived in tact.
The instructions for the cover were fairly easy to follow and it fit our 2023 Canyon Denali with a spray in bedliner perfectly.



by:

Works good overall. Opens, closes and locks very well. I get some water coming in on the sides , driving in the rain. Not pleased with the connections on the drain tubes. I have had to glue them in more than once, even during initial install. I did not like the fact that I had to drill those 1/2" holes in the bed for them as well.



by:

The product quality is very good, and I anticipate many years of useful service. Regrettably, the assembly directions are somewhat superficial. Identifying hardware (i.e.: screw size, color, etc.) is particularly challenging as there is not an actual size comparison chart. Properly aligning the product was also very difficult, multiple attempts were required.



by:

Fantastic cover. Perfect for my needs. Performs better than I imagined it would. Ability to access bed instantly with supplies... Yakima rack on/off in literally less than two minutes. Drive a black limited Tacoma. Perfect match for this truck. From sleek to bound for the trails in no time.



by:

Very good quality tonneau cover and it just glides when opening and closing. Installation was super easy too.



by:

Pretty decent cover and installation was reasonable. I’m still not sure how water resistant it will be but we will see. It is replacing a folding cover and thus far it is easier to use. I’ll have to see if it is worth the space trade off but I didn’t like the rear window being blocked when the folding cover was open.



by:

Excellent shipping. No damage. Installation instructions were easy to follow. No complex tools needed. Lightweight product. Easy lifting and maneuvering into position.



by:

etrailer had excellent communication and the cover came in sooner than expected. The Retrax cover was flawless and had excellent instructions for easy installation!



by:

Piece of junk. It ripples in the wind like a tarp over the back of the pickup. The canister does not roll up without having to be forced it in, mostly due to the ripples from driving down the highway. 2 stars because it could work well, the parts and design, if the actual cover were designed for the use it is intended for.



by:

Everybody at etrailer have always provided excellent customer service. Thank You,



by:

So far I have about 10000 miles on this set up and the Retrax cover has been great, love being able to keep prying eyes off my gear and water infiltration has been minimal. This is the plastic version and seems to be holding up fine to the elements thus far…time will tell, there is a slight loss of cargo space with this unit installed but it hasn’t been an issue for me. I am very happy overall to this point.



by:

I spent more time getting the cover aligned than assembling and getting it onto the truck bed rails. The instructions are very good. I had to adjust the top jaws of the all the rail clamps since I have the T-slot XR rail system. I used a thin piece of cardstock to check for unwanted clearance between the jaw and truck bed flange. Since I didn't have a very large drill bit, I used a Dremel sanding bit to enlarge the pilot hole that I drilled through the plastic bed plug for the drain tube. That worked fine. The cover looks great and seems to operate well on this first day of installation and use. The T-slot rails do not get in the way of using the hand-holes for the rear step bumper.



by:

The install was very easy but definitely a two man operation. The section that holds the rolled up cover is pretty large so you do lose some space. That section is also is fairly thin walled. I have dented and scratched it pretty good but it doesn't affect its function. I put one of those cargo load bars across the bed in front of it to try and stop that. I did have it "rack" a little after some rough drives which can cause it to bind a bit when rolling up. But it always closed on the second or third try. And its easy to straighten up again if needed. No water has gotten in the bed and it sure makes grocery getting a whole lot easier. I think its great.



by:

Great accessory for our F-150. Installation isn't too bad if you just take it slow and double-check everything as you go. Looks are top-notch, and the functionality has been excellent. Gives us an extra sense of security being able to lock the cover when needed. You lose a small amount of bed space, but so far it hasn't caused any problems for us. Did I mention it looks great?



by:

Looks very sharp and fits well on my 2022 Silverado 1500 5'8" bed, and the fits well with Rihno Rack heavy duty crossbars 65" long.


25
25

See what our Experts say about this Retrax Tonneau Cover

  • Tonneau Cover and Ladder Rack for 2022 Chevy Silverado 5-3/4 ft Bed for Bike Rack
    Hey Matt, I really like the RetraxONE XR part # RTX24YR that fits your 2022 Chevy Silverado 1500 5-3/4 foot bed as it's a retractable tonneau cover that's easy to use and very secure. It would then allow you to use the Yakima OverHaul HD part # Y01151-5855 which has top channels for a bike rack to attach to. Do you think this would work or were you thinking something different?
    view full answer...
  • Correct Retrax Tonneau Cover Fitment for a 2024 GMC Sierra 1500 AT4
    Hey Jarrod, thanks for reaching out! The Retrax covers that fit a 2022 GMC Sierra 2500 will fit a 2024 2500 model, but not the 1500 AT4 model that you got. For your application we'll need to get you a new cover. I really like the RetraxONE XR Hard Tonneau Cover # RTX24YR because it comes with the T-Slot rails and is more on the cost-effective side of the Retrax brand without sacrificing quality. It's important to note that none of the Retrax covers will work with the CarbonPro bed so...
    view full answer...
  • Compatability of BAK Revolver Tonneau Cover With Yakima Overhaul Rack on 2020 Silverado 1500
    The Yakima OverHaul HD Ladder Rack # Y01151-5955 is compatible with Retrax XR, Pace Edwards UltraGroove, or Ford Embark LS tonneau covers. If you're set on using this ladder rack, or already have it, I recommend the RetraxONE XR Hard Tonneau Cover # RTX24YR. This is a retractable cover so you will have full bed access. It also features a locking handle so you can keep cargo secure. If you really want to use the BAK Revolver # BAK62VR then I recommend checking out the Thule TracRac SR...
    view full answer...
  • Recommend Hard Tonneau Cover and Ladder Rack for a 2022 Silverado 1500 Trail Boss w/ 5 3/4 Bed
    Congrats on the new truck and thanks for the picture! I will be happy to answer all of your questions. The Thule TracRac SR Sliding Truck Bed Ladder Rack item # TH43002XT-782 is only available with the silver uprights and crossbars. The Truxedo Elevate Item # TX96NV mount in T slots, is confirmed to fit your truck, and they only other sliding ladder rack we have for your 2022 Silverado. It is compatible with BAK, Extang, Retrax, and Truxedo tonneau covers with T slots not Thule. This...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Rhino-Rack To Fit A RetraxONE XR Tonneau Cover W/ T-Slots For My 2020 Chevrolet Silverado Short Bed
    The Rhino-Rack you will need for your 2020 Chevrolet Silverado 5'8 truck bed with the RetraxONE XR Hard Tonneau Cover - Retractable - Polycarbonate - Matte Black - Accessory T-Slots, part # RTX24YR, is the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - Black - 71" Long, part # RRVA180B-RRRLT600. This rack has a weight limit of 220 lbs. The crossbars come with t-slots so you can use any t-slot mounted accessories and those that clamp to crossbars. I...
    view full answer...
  • Crossbars and Cargo Basket for 2020 Chevy Silverado 1500 5-3/4 ft with Retrax OneXR Tonneau
    Everything you mentioned is compatible with one another. The RetraxONE XR Hard Tonneau Cover # RTX24YR is a fit for your 2020 Chevy Silverado 1500 with the 5-3/4 foot bed and has tracks that are compatible with the Rhino Rack Retrax XR crossbar set # RRVA180B-RRRLT600. The Flint Hill Goods Basket part # FHG74ZR will fit the Rhino Rack Vortex bars as well.
    view full answer...
  • Recommended Tonneau Cover For a 2019 Chevy Silverado 1500 With 5-3/4' Bed and Yakima OverHaul Rack
    I recommend using the RetraxONE XR Hard Tonneau Cover # RTX24YR on your 2019 Chevrolet Silverado 1500 with the 5-3/4' bed. This tonneau cover includes T-Slot rails that will allow you to install the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-58 with the Adapter Kit # Y01155. The Retrax cover uses polycarbonate slats and can be locked in any position along the rails. It is made in the USA and will install onto your bed with a no drill installation.
    view full answer...

Do you have a question about this Tonneau Cover?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Written by:
Matthew S
Employee Daron K
Edited by:
Daron K

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.