To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hauling oversized cargo doesn’t mean leaving your truck bed uncovered. The Lomax Stance folds up toward the cab, giving you full access without removing the cover. It latches to the cab at a 90-degree angle for secure highway driving and won’t touch or scratch the rear window. The low-profile design sits less than 1/2" above the bed rails, keeping a clean, streamlined look even when it’s folded open.
The extruded aluminum panels are tougher than they look. They’re coated in black urethane that resists scratches and impacts from hail or falling tools. With a 400-lb weight capacity, the cover stands up to daily use, whether hauling gear for work or loading up for a weekend trip. The rigid panels stay solid and flat, so they won’t flex or sag over time.
When bad weather hits, the integrated weather seals keep out rain and dust so your gear stays dry. There’s no need for drain tubes or complicated routing—just a snug seal along the edges that works in all conditions. The cover also latches securely whether the tailgate is open or closed, and when the tailgate is locked, your cargo stays protected from prying hands.
Getting this cover installed is straightforward. The clamp-on design means no drilling into your truck bed, and once tightened down, the rails sit square and flush for a perfect fit. You still have open stake pockets for racks or tie-downs, making it easy to pair with ladder racks or other gear setups without interference.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ratings & Reviews
Looks good on my Santa Cruz excellent product and easy installation. 2 thumbs up .
Cover is damaged. No ETA on replacement… should have bought directly from manufacturer.
Easy to order! Quick delivery! Easy in stallation!
I like the cover. I installed it this afternoon. The directions left a little bit to be desired
After receiving the order it took about 1 hour for install.
everything fit really well. Product looks nicely made. packaging was great and protected the product well during shipping.
LOOKS AWESOME AND FITS PERFECT
I ordered it and it came in about one week. It was very well packed and in excellent condition I read the instructions a couple of times and then went to install it. I wasn't sure which was the right side rail and the left side rail at first. It would be nice if they would put a little round sticker on the front of the rails. That said, left front right front. I did get them on right the first time ,install was fairly easy and when I got it all together it fit beautiful and looks awesome and it Opens and shots very easily. Awesome product!
The tonneau cover fits tight and the installation was pretty straight forward. My only complaint is the tailgate will not open remotely because the seals are very tight between the tailgate and the cover..Hyundai Santa Cruz
Great product fits perfect.
Easy install. I’ll have to see how it holds up in the weather. Looks good snd seems to be very sturdy
The railing that has the release cord was bent in so the adjustment tabs could not slide. The bent rail also affected the alignment of the latch. Did not expect to have to jerry rig the installation. Now that it’s been installed it looks good but it does leak in a hard rain.
Good quality, easy to install.
Install went well for me the extra set of hands made it easier. Looks good on the Santa Cruz. Thanks for all the support!!!!
Sturdy, looks good, and keeps bed contents secure.
I just installed my cover today. It looks really good on the truck. So sleek....not like the canvas ones. It was super easy to install. All you have to do is clamp (they give you the clamps) rails to the sides of your truck bed and drop the cover into the rails and tighten it down. I can not say enough about Etrailer's customer service. Originally they sent me the wrong cover and they took responsibility for the error. I had several emails and calls from Marti in customer service...even on the weekend. She did incredible work to make it right. In the end, although it took a long time, I am a satisfied customer.
Delivered in a timely manner. Instructions were very poor, but not too many parts and with the photo had it figured out without too much trouble. It's in a garage when not on the road, but I've driven in heavy and steady rain and didn't notice any water. Really like the third panel closest to the cab folding up... it has been very handy placing and removing items.
The cover fits and functions very well. the installations were difficult to follow and showed no pictures what the installation steps should look like. I had to skip steps to figure out the installation then go back to complete
Built very well.
Installation was not easy. Need to have on line video for installation.
Again the product is very well built
Easy to install,fits perfectly,looks gr eat.
Used daily. Clearing mountain lot, cover up lets me get a full load of limbs and needles in bed of truck without having to stuff under 1/3 of a standard bed cover
Great product. Your YouTube video was excellent for the installation. Thanks
After watching an installation video it was relatively easy to install in a short time. However, the instruction booklet need clearer pictures, and the side rails did not have indicators of which side they each needed to be installed.
Excellent cover. Easy to install and use. No drain tubing needs to be installed for the Lomax Stance cover. I would recommend this cover over other trifold covers, especially if you have the Ford bed liner.
I like the look and the convenience provided by the tonneau cover on my Maverick Lobo. However it took a lot longer to install and I had to call the company to get clarification on the front seal, the instructions were not clear.
I suggested that it would be easier to install the clamps if you taped the bottom of the clamp to create a hinge and prevent miss-alignment of the "teeth". This made it much easier to position the clamp and tighten the nut.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
4/25/2025
Thanks for sharing the install tip about the clamps, Fedrick. I bet it looks great on your 2025! What color did you get?