To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If you use a ladder rack or T-slot rail system, this cover works right alongside it. The Revolver X2 mounts inside the bed rails, leaving your stake pockets open for racks or anchors. That means you can haul ladders, kayaks, or gear on top while keeping the bed below protected. The low-profile fit also keeps everything streamlined without interfering with uprights or rail mounts when rolled up.
You don’t have to trade strength for style. The Revolver X2 uses 1/4" thick, rustproof aluminum slats under a textured, UV-resistant vinyl skin. The aluminum provides security against impacts, while the vinyl layer seals out rain and sun. Rubber seals along the rails, cab, and tailgate help keep water from seeping in, so your cargo stays dry and covered through heavy use and changing weather.
When you need the whole bed, you can roll the Revolver X2 up in moments without removing it. The interlocking aluminum slats hinge smoothly so the cover rolls tight behind the cab. Nylon straps and plastic buckles hold it securely in place, and four rubber bumpers keep it from touching the cab. It’s a hard cover that works like a soft one—quick and simple.
The Revolver X2 keeps a clean, nearly flush profile, sitting just inside the bed rails instead of on top of them. With no bulky edges or visible hinges, it blends with your truck’s lines for a smooth, factory-style finish. It also helps reduce wind drag, so you get a sleeker look and better efficiency at the same time.
Setup is straightforward with no drilling required. The aircraft-grade aluminum rails clamp to your bed sides and align automatically with pre-slotted brackets and included bolts. The design keeps everything square and tight without trial and error, so you can get it mounted and ready to work in no time.
Ratings & Reviews
This is the best tonneau cover I have ever owned .And I have had several different type .It has some small leaks but the only one that I had that didn’t covered the bed rails.
I question whether it's a genuine Revolver product. The fit is very poor. The quality is bad. It's not my first Tonneau cover and the one for my other truck is the genuine product. I feel this is a knock-off. There is a significant indicator also - it doesn't contain the Revolver label.
Love my BAK Tonneau cover. If there was one thing I've had an issue with is in the winter the track can freeze down and stop you from opening the cover. But other then that I am very happy with it.
I have had this cover for one year and I would not buy it again. I read the reviews about how terrible this design is in climates that has freezing temps, but I live in New Orleans so freezing rain and snow was not a concern.
Turns out it’s not just cold weather and ice that ruins this, so doesn’t the sun and heat. The vinyl cover that you see when the cover is down is glued to a bunch of aluminum pieces and this design allows it to roll up and down. When the sun heats up the vinyl the glue separates from the aluminum sections and the cover will not roll up or down.
Don’t get me wrong, the concept is great, but the companies execution is off. I think I bought the second iteration and if I were you I would wait until the 6th or 7th version. They are far from getting this design right.
The felt-like lining that lies on underside of cover (and acts as cushion for rolling?) had bad glue job. This material came off in under 1 year. Appears that the glue was not meant for hot weather, as it came off in summer heat. Disappointed. Mfg website does not provide instructions on what glue to use to reattach, so had to experiment to find glue that would work to reattach. Perhaps in future they should use mechanical attachment instead of glue method...
Perfect for the hard working truck fans! Great quality for the money! I love the fact that I can completely conceal my tools and gear without sacrificing the full use of the truck bed! Highly recommend!
I purchased this cover about a year ago for my 2019 Nissan Titan. I was happy with the appearance, it makes the truck stand out like no other. I can store things in the back, like luggage when traveling and it is secured and it will not leak. The cover itself is pretty sturdy, I have sit about 100 Lbs. on it and it doesn't bow in. I have the leather edition and it is easy to clean. It looks new even after a year, But maintenance is required to keep it looking good. Just keeping it clean and leather conditioner keeps it looking spectacular.
This BAK RevolverX2 tonneau cover is a high quality product that has performed well on my GMC Sierra 2500HD, it keeps my cargo safe, relatively dry and I save fuel. what more could ask for in a product.
I have found the cover easy to install. It still works fine 1 year later. It is easy to roll up using one hand. The only problem I experienced so far is occasinal failure of the wire to release the cover on the driver side of the cover when operatred from the tailgate on the passenger side. Its otherwise been a perfect product keeping even the worst rain and snow out of the back of my pickup.
The roll up cover has performed very well in cold temperatures and warm. The top is water proof even when sprayed at the car wash. I like the security provided when the tailgate is locked. Overall very happy and would purchase this again.
Secure straps for when the tonneau cover is rolled up ripped out of the washers holding to the frame. Tarp pulled away from rubber seal causing water leak. Latches on the side of the cover dont always latch into the track.
I purchased both the Bak Revolver 2 Tonneau and the B & W adapter for my companion 5th wheel hitch from trailer.
Both the product and service was great
I am really glad I bought this cover. I looked and looked and ended up with this hardtop aluminum roll-up cover. It was easy to install, fits well and is secure. I am able to roll it up and snap it down and still pull a fifth wheel without having to remove the cover, a big plus.
My only issue is the tie down buckle and straps are poorly conceived. The snaps should be redesigned for easier access and use. One of the snaps broke early on and I had to find a replacement.
This is the worst tonneau cover I’ve ever dealt with in my life. The latching system is complete garbage. I have it adjust as far back as it can go and it does not leave the latches closed. You hit one bump one the road and it slides off the latch and the sides come up with any little gust of wind. I am currently on my 4th warranty claim with them in 11 months second full cover replacement. Wish they would just give me a refund.
Clean look and easy to use. Still very satisfied with my purchase after 1 year. I installed it on a 2018 Honda ridgeline. My only complaint is when I purchased the product, it took them 3 delivery to provide the right attachment parts for my vehicle. Poor workmanship from the manufacturer. This problem as nothing to do with etrailer, which I'm happy with.
We bought (2) of these covers a year ago and would definitely highly recommend them. This is a well thought-out, nicely featured and well designed product of excellent quality. In the past we used Velcro strip hold-down "tarp-type" Tonneau covers in the past and will never go back. These covers roll up effortlessly and very quickly compared to the Velcro type. And, (as long as you keep the lock-down bar & track clean) they just as effortlessly roll out, lay down, lock down, and stay down - no stretching and having to take time working to get the tarp tight so that it doesn't "flap" in the wind. Wonderful product.
It’s a great fit on our Ford Maverick. It is very easy to open up when we need to haul larger items and very easy to close when more room is not necessary. We are extremely happy with this cover and etrailer.com.
I couldn't be more pleased by this tonneau cover except if they found a way to make it magically disappear into the cab when I want to use the whole bed. It did its job throughout both summer and winter, keeping snow and rain out of the bed of my Tundra. By virtue of its unique rolling design, it's also one of the few options compatible with my TracRac: I can fully roll and unroll it no matter where the racks are placed.
Great tonneau cover! It's amazing how easily a well made product installs. I replaced my soft folding IMPORTED tonneau cover with this sweet piece and I can honestly say I now understand the difference in price. The Revolver X2 fits flush, looks great, closes securely, and just makes me feel a little cooler knowing it's back there ( I need all the help I can get). Bottom line, I was apprehensive spending so much for a tonneau cover but now that I did I will shout from the rooftops "YOU GOTTA GET ONE OF THESE REVOLVER X2s!" etrailer is a no-brainer as well, you can buy BAK tonneau covers from dozens of other retailers but I know etrailer, I trust etrailer, and I know if there's ever a problem (which I doubt there will be) etrailer will be there to fix it.
Easy to install and works better than e xpected!
I ordered a BAK Revolver X2 Hard Tonneau cover for my 2013 Nissan Frontier pickup truck. Navigating the website was easy, I liked the price and the free shipping that were offered. I immediately received tracking information for my item so I knew what to expect. The item arrived on time and was professionally packaged and undamaged during shipment. The installation instructions were easy to follow and the kit included everything necessary to complete the installation, which took approximately 30 minutes. The cover looks great and works great. I am a very satisfied customer.
Overall I'm satisfied with the product, but for the price I expected a little better attention to detail. The fit and finish leaves something to be desired. All the parts are just cut and are not finished or cut evenly for that matter (see pics). It gives the overall feeling of a hastily finished product. Plus I've already to replaced some parts due to breakage. Fortunately they were rreplaced free of charge. But it does the job and fits my needs, so I'm giving it 3 stars.
I like the idea of this cover rolling open or closed and the fact it locks when closed. Problem is the plastic guides that push into the aluminum rails do not stay in place. When rolled open and strapped down bouncing down highway the weight of the cover pushes these plastic guides out and allows seal to be damaged and to come out of its grove. I had to insert pieces of wood into the track to hold guides in place at front of track. I pull a 44 ft toy hauler around USA so cover stays rolled open for weeks at a time. The weight of rolled up cover smashes the guide pieces out of place. In the picture that’s paint stir sticks with foil tape on them so they stay dry.
The only issue I've experienced with this cover that I was not pleased with was it blew up from one corner during a very strong crosswind and several of the plastic rail clips broke. I consider it an anomaly since its never happened again. BAK sent me replacement parts at no cost. The repair was simple.
On the positive side the cover gives you additional security from theft due to its construction. It's expensive but I feel worth the money, especially when protection of valuable cargo is needed.
The rollback cover is excellent. It is designed well, and went on my 2003 Silverado easily and it fits well. The only negative I have with my new cover is when it arrived from the manufacturer (BAK), it was full of aluminum chips. As I unrolled it to install it they were wrapped into the cover. I was getting aluminum chips everywhere. The cover had them rolled in the fabric cover, I got them on/in my hands, and on the painted surface of my truck. That was my only concern. eTrailer.com is to be commented on their commitment to customer service. They kept me informed on the progress of the tonneau build continually. Thanks to all at eTrailer.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bob B.
11/21/2017
Still water resistant, works well, and looks great