Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2003 Yamaha FJR
We'll connect you with nearby partnered installers who know this exact setup.
BAKFlip G2 Hard Tonneau Cover - Folding - Aluminum
Part Number: BAK25RV
In Stock
$1,199.99
2003 Yamaha FJR
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (67)
- Q & A (0)
- Photos
BAK Industries Tonneau Cover - BAK25RV
Highlights
- Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
- Full Bed Access: Folds up flat or upright so you can haul large gear without removal.
- Hard Cover Keeps Gear Safe: Locks with the tailgate so your cargo stays protected.
- Keeps Cargo Dry: Rubber seals and drain hoses channel water out of the bed.
- Tough Aluminum Build: 1/2" thick rustproof panels support up to 300 lbs evenly.
- 10 Minute Install: Clamps on with a wrench; no drilling needed.
Features to know about
Full Bed Access: Tri-Fold Aluminum Design
Most hard covers make you choose between security and access. The BAKFlip G2 solves that with a tri-fold, all-aluminum design that flips open in sections so you can reach part of the bed or fold it completely upright for full use. Prop rods hold it securely behind the cab while you drive, and built-in rubber bumpers keep it from touching the rear window. You can even keep visibility out of the back glass by folding just partway and securing it with the integrated straps and buckles.
Reliable Security: Automatic Latching Panels
Keeping your gear safe is simple with the G2’s automatic latches. Each panel locks down as it closes—no separate keys or handles to mess with. Once the tailgate is shut and locked, the entire cover is sealed. The ½" thick aluminum panels resist prying or cutting, so tools, camping gear, or groceries stay protected day and night without extra steps.
Built to Handle Work and Weather: Heavy-Duty Aluminum Panels
When you need a cover that lasts through job sites, storms, and road trips, this one holds up. Each rustproof aluminum panel has an insulated core for added strength and supports up to 300 lbs of evenly distributed weight when closed. The matte black finish with hair-cell texture resists corrosion and UV damage, while rubber perimeter seals and a built-in drainage system route water away from your cargo.
Clean Look and Quick Install: Low-Profile Inside Rail Mounting
The G2 sits flush inside the bed rails for a clean, low-profile look that keeps your truck lines smooth. Mounting inside the rails also leaves stake pockets open for racks or tie-downs. Installation is straightforward—no drilling required. The rails clamp on with a wrench, and adjustable hinge brackets help fine-tune the fit so everything sits tight and even.
Specs
Construction and Materials
- Panel thickness: 1/2"
- Panel material: Rustproof aluminum
- Panel core: Insulated, closed-cell foam
- Rail material: Aircraft-grade, rustproof aluminum
- Rail finish: Black powder coat
- Seal material: Matte black rubber
- Finish: Black paint with hair cell texture
Weight Capacity
- Load rating: 300 lbs (evenly distributed)
Fit and Compatibility
- Mounting style: Inside bed rails
- Compatible accessories: Stake-pocket-mounted accessories and raised side rails
- Cover type: Tri-fold hard tonneau
- Profile: Low-profile design
Operation
- Opening style: Folding (tri-fold)
- Latch type: Automatically latching panels
- Release: Pull cords located on panel corners
- Prop rods: Included for upright, open-bed driving position
- Integrated buckle system: Secures folded, flipped-up, or closed positions
- Tailgate operation: Opens at tailgate; secures when tailgate is closed and locked
Installation
- Installation type: No-drill
- Tools required: Wrench
- Attachment method: Clamps to inside of bed rails
- Front hinge rail mounting: Secured with included bolts
Protection
- Weather resistance: Matte black rubber seals and built-in drainage system
- UV protection: Yes (UV-resistant finish)
- Corrosion resistance: Yes (rustproof aluminum and powder-coated rails)
- Drainage: Integrated gutter system with drain hoses
Performance and Aerodynamics
- Design benefit: Aerodynamic style reduces wind drag and improves fuel mileage
Warranty
- Warranty length: 3 years
Origin
- Manufactured in: USA
226324 BAK Industries BAK Flip G2 Hard Folding Truck Bed Cover
This Product Fits The Following Vehicles
- 2022 - 2028 Ford Maverick
Ratings & Reviews
4.6
67 reviews
by:
Al in OK
12/29/2022
Great Tonneau Cover for my Ford Maverick, no issues in a year so I don't suppose there will be any. Fit is perfect and adds class to my little truck. Thanks for a good product.
by:
Jim
11/30/2023
Great cover!! It was easy to install and has kept everything stored under it clean and dry. I would definitely recommend it.
Jim
12/2/2024
Generally this cover continues to perform well. There is a small leak, which I haven’t been able to locate, but it’s not enough to do any harm to whatever may be in the bed. I would still recommend this cover.
by:
Marshall L
05/25/2023
Follow the installation instructions and it will be installed in about 30 minutes with simple hand tools. Prompt shipping, easy to install. Wonderful product.
by:
Greg
10/28/2026
The cover looks good, if I ever get it on. Need 8 claps to put on side rails, only got 6! Had to call to get 2 more shipped to me.
by:
Steven M.
04/29/2019
2018
GMC
Canyon
Very easy to install. I didn't use the instructions (no, I'm not one of those guys). I used the installation video on the BSK G2 tonneau cover on etrailer.com! It arrived in just a few days and was very well packaged. I can finally store things in the bed of my truck safely. Way to go etrailer and BAK Industries!!
Steven M.
5/20/2020
It has been holding on strong. One of the weather strips was coming undone, but I was able to adhere it back down.
by:
Bud
02/24/2019
2011
GMC
Canyon
I ordered a Bakflip tonneau cover and fob lock for my tailgate. Instructions on the cover were perfect. It looks great. Absolutely no institutional videos on my 2011 GMC Canyon for the remote. The wiring connection portion of the install was just past tedious. Once figured out it works like a dream.
Bud
3/2/2020
Still is exactly what I hoped it would be. Adds security to my pick up bed, looks great and gets compliments. Plus it is easy to use. Great product...
by:
J Schorn
07/01/2016
Dodge
Ram Pickup
Ok the cover is great if you use it to secure items in the back but, the down fall is how the system attaches to the Ram trucks. The pressure applied by the bolts for securing the side rails causes the manufacturers bed rails to buckle in the middle which, is minimal if you live in a cold climate but, for the majority, it causes issues. I love the security but I hate what it does to my bed rails.
by:
J
03/12/2025
Excellent cover! Easy to install. Looks way better on my truck than the old one and being able to fold it all the way up against the back window is very nice.
Mike H.
3/12/2026
After using it for a while Im extremely happy with this cover. It has been a game changer, making my 2008 Ford Ranger bed far more useable and convenient for carrying a variety of items. One of the best purchases Ive ever made for it.
Lazer S.
3/12/2026
@MikeH Glad you are liking it! Hard covers are definitely the way to go! ^___^
What do you typically keep in your bed? I have a milk crate with some survival type things and various tools in it. One can never be too prepared!
by:
Andrew
01/23/2025
2020
Ram
2500
This cover works great and was very simple to instal. Didn’t take much time. The only thing I can recommend is that the instructions are kinda hard to follow at the begging.
by:
Rockin S Texas
06/21/2024
I have had many brands of hard covers and this one out performs the others.
The installation is critical especially with the RAM box configuration as I have.
All the parts were supplied. Take your time, read and measure twice cut once.
The installation is critical especially with the RAM box configuration as I have.
All the parts were supplied. Take your time, read and measure twice cut once.
by:
Silverado Esteban
08/06/2025
This cover has been perfect for my application. Previously I had an electric motorized unit that leaked badly when it rained and had no mechanical override in the event the truck was not running. This cover is nearly waterproof and is easily opened and held open for travel if I choose to do so. It looks and works very well.
by:
Alton
07/16/2025
It’s well built and stout. Installation was a little tough. I’ve had to adjust lock tabs a few times. It sure works great keeping wheelchair covered.
by:
S
09/18/2024
Camera mounting seems off alittle compared to the original tried adjusting but still the same view
by:
Wayne
08/28/2025
Good product. I had to re-drill the prop rods for the cover. They were no where near where they should have been. Other than that, the installation went pretty well. Not quite as sturdy as the one I bought 15 years ago from the same company.
by:
Mike
06/03/2025
The BAKFlip G2 Hard Tonneau Cover has done an excellent job of protecting our various item in he truck bed while running around town or out camping. It is a good solution to securing items in the truck bed from casual theft.
by:
John
05/02/2023
I bought this cover so when I tow my fifth wheel camper I can open up and still leave a section closed to cover my air compressor and inverter and when I drop the trailer I can cover my hitch and lock it. It works perfectly for my application. Great quality and sturdy.
John
5/3/2024
After a year of use the cover still works perfectly and I would highly recommend this cover. I really like the fact that you can open up different sections without having to open the whole thing.
by:
Mardy
10/01/2025
Difficult to install
Makes noise at highway speeds
Need pliers to get latches to click into rails to hold on
Flimsy
Poor quality
Makes noise at highway speeds
Need pliers to get latches to click into rails to hold on
Flimsy
Poor quality
Lazer S.
10/7/2025
Hi Mardy. I have heard this to be a difficult install and the latches to be stiff (though adjusting them helps), but noisy, flimsy, and poor quality are firsts for a BAK product like this. What kind of noise are you getting? Is something maybe not tightened down all the way causing part to stick up? And, what part are you finding flimsy or poor quality?
by:
Conley J
03/25/2017
2013
Toyota
Tacoma
The tonneau cover is excellent when you get it installed properly. I can only give it a 3 rating because the workmanship of their latches the way they installed them was very shabby. Had to move all the latches back into their frame so they would not hit the side rails, had to re-drill holes that fastened most of the latches to the frame. If they would have taken their time installed the latches properly, then it would have been an excellent tonneau cover all over.
Conley J.
3/26/2018
After year of use I love the tonneau cover. had issues installing but after using for a year I would give it a five star.
by:
Tom L.
07/21/2017
Love this cover. It was better than I expected. Equally as important I like working with etrailer. Good people that understand and can explain the details of their products. I have used them for a lot of stuff for my boat trailers always with good results.
Tom L.
7/23/2018
Actually its closer to two years and I could not be more pleased. I have done a few rainy road trips and the one thing that worried me was if it would keep the contents dry and it did. Al else about the cover has been good too. Good product and it fit like a glove.
by:
Connie
07/02/2025
This cover has made leaving items in our truck bed much easier.
I do wish it had a way to secure it when not fully open, I.e. one section open.
I do wish it had a way to secure it when not fully open, I.e. one section open.
by:
Sid
01/18/2022
I was impressed with how your company staff received my order request, how company staff kept me updated on order status and delivery. Installation went very well. The instruction manual was well detailed. I am very satisfied with your cover. The cover fits perfectly. I continue to receive compliments. Thank you from a very satisfied customer.
Sid M.
1/19/2023
Pleased with product. Working out well.
by:
Jeffrey
09/12/2018
2017
GMC
Sierra 3500
This is the second BAKFlip G2 Hard Tonneau Cover we have purchased. The first was for our 2005 Chevy. This is for our 2017 GMC. The 2005 fit much better. The 2017 model is not wide enough to actually fit the bed allowing water to easily enter the bed. Also the posts that hold the cover up against the cab were drilled wrong. You have to remove the slide to fit the prop rod. They simply drilled the hole for the nutzert in the wrong spot on the passenger side. Just not the same quality fit or finish as the 2005 version. We would have returned it but sending it back was going to be too much of a hassle due to its size.
This cover is now completely junk due to a hail storm. No fault of BAKflip but the hail storm destroyed the cover is seconds. The aluminum used in this model is just too light to protect from any type of impact.
This cover is now completely junk due to a hail storm. No fault of BAKflip but the hail storm destroyed the cover is seconds. The aluminum used in this model is just too light to protect from any type of impact.
by:
Kevin
09/13/2020
2019
Dodge
Ram Pickup
We purchased the BAK Industries BAKFlip G2 Tonneau Cover for our 2019 Ram 2500. We use this cover for security/keeping the weather off of our camping accessories for our RV. The cover works great and is fairly waterproof. The only issues we have had is the 1st latching cable, most of the time we need to pull the cable release from both sides to release the locking lugs to open. Over-all a good purchase, and would recommend it for anyone looking for a hard cover.
by:
Tim M.
09/13/2019
Overall, a good product. This is the third BakFlip I've owned on different trucks. Quality wasn't as good as older units. The wires to release the latches are too long and get trapped inside the cover so you can't reach them. I added pieces of tape to fix this problem. Also, the nylon straps to hold it open are a nice addition but the plastic buckles broke almost immediately. Older units with metal rings for you to attach bungee cords was a better design.
As always, etrailer service & delivery are outstanding!
As always, etrailer service & delivery are outstanding!
by:
Earl
10/14/2023
Ford
F-350 Super Duty
This is the third Bak flip G2 Yard Tonneau Cover. Like that they are strong enough to hold test shap and fold flay enough the I can use the bed camera on my F-350 to help me hook up to the 5th wheel. And when it is closed and my tailgate is locked does provide some protection against theft of anything in the bed. I would recommend the cover to anyone that needs one.
25
67
true
Show More Reviews
See what our Experts say about this BAK Industries Tonneau Cover
- Will the TS Rails for TruXedo Elevate Rack System work with the Gator EFX Hard Folding Tonneau CoverHello Tyler. Unfortunately, the TS Rails for TruXedo Elevate Rack System - Full Size - X-Short Bed - 63" - Aluminum # TH75FR does NOT work with the Gator EFX Hard Folding Tonneau Cover. Gator is not a brand that we carry, so I reached out to my contact at Truxedo who verified this information. The rails do work with the BAKFlip G2 like # BAK25RV which is also a fold up cover. If you would like to give me the year, make, model, and bed size of your truck, I would be happy to find the...
view full answer... - Do the Crossbars of the TruXedo Elevate # TX76NV Clear the Cab on My 2022 Ford Maverick? I went ahead and called my tech at Rhino-Rack, and she confirmed that the TruXedo Elevate Truck Bed Rack System # TX76NV has a total height of 28 inches from the bottom of the mounting feet to the top of the crossbar. In order to know for sure if this is enough height to clear your cab, I recommend measuring from your truck bed rail caps to the top-most point on your 2022 Ford Maverick's cab. As long as that does not exceed 28 inches tall, you are good to go! If you need straps to secure...
view full answer...
Do you have a question about this Tonneau Cover?
Info for this part was:
Updated by:
Wilson B
Written by:
Matthew S
Edited by:
Daron K
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Al O.
12/30/2023
Great product, I have had no problems whatsoever and it enhanses the look of my truck.