
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Rain, snow, or road grime—this cover handles it all. The Revolver X4s uses double-coated, reinforced vinyl over 1/4" thick, aircraft-grade aluminum slats to keep your gear dry and secure. The matte black finish resists UV damage and scratches, while internal rubber seals and beveled edges direct water away without the need for drain tubes. When locked, those aluminum slats prevent cutting or sagging, giving you the strength of a hard cover with the smooth roll-up function of a soft one.




Big cargo or tall gear isn’t a problem here. The X4s rolls up easily by hand and secures behind the cab with built-in nylon straps and sturdy buckles. Four rubber bumpers keep the rolled cover from rubbing against the cab. Because it mounts inside the bed rails, you can still use stake pockets or tie-downs for racks and gear. When closed, the cover sits nearly flush—only about 1-1/2" above the rails—for a clean, low-profile look.




Opening or closing the cover takes just one person. Roll it out, press down the rear slat at the tailgate, and the side latches automatically engage along the rails. When the tailgate is locked, your bed is fully secured. To open, drop the tailgate and pull either release cord on the rear slat—both sides release at once so you can roll it up in one motion. No Velcro or snaps to fight with, and the reinforced latch gussets never need adjustment.



You can load it up without worry. When closed, the Revolver X4s holds up to 400 lbs of evenly distributed weight on top, thanks to its aluminum skeleton beneath the vinyl top layer. Felt undersides protect your hands from hot or cold metal and keep the slats from scratching as they roll. Whether you’re hauling tools, bikes, or camping gear, this setup delivers long-term durability backed by a 5-year warranty.
Installing this cover is straightforward. The side rails clamp to the inside of your bed with no drilling required, and slotted brackets let you fine-tune alignment. Pre-installed shims and spacers keep everything square, so you get a tight fit and smooth operation right from the first install.

Ratings & Reviews

Lazer S.
2/24/2026
Glad to hear you are still happy with it, Todd! These hard roll up covers are definitely nice and durable. What are you keeping in your bed? I have a bunch of survival type gear in a milk crate. Can never be too prepared!

Brian P.
6/14/2023
The cover has been on my truck for a little over a year now. It looks exactly as it did the day I installed it. By far the best tonneau cover I have ever put on one of my trucks. Also, the roll up is much more convenient than the older tri-fold models I have had before. This thing looks good and is tough as nails. It has not been babied over the last year, but shows no signs of weartear. My one year review is 5 STARS!! I highly recommend this cover!

Roger
9/21/2023
I had a second warranty claim in June 2023 due to the same issues. I contacted BAK warranty claims and once again they were quick to respond. I asked them to replace my cover with a BAKFLIP MX4. They agreed and shipped the replacement very quickly. So far the new cover is working fine. Im interested to see how it works in cold and freezing conditions. My personal belief is the BAK Revolver is too heavy when rolled up against the cab on an 8 foot bed. The weight causes it to flex, stressing the hinged ribs. The ribs then start to separate. Im guessing a cover for a shorter bed would not cause the ribs to separate due to less weight when rolled up.

Tim
8/24/2023
My previous review still stands. I have to reposition cover at least once a month. Still love the cover other than that issue. I believe a redesign of the connector would be in order for this product to get 5 stars.

Tim
9/7/2025
Not great anymore… the glued on waterproof liner started peeling up about 1 year into service, the the pivot points on the tool up part started to separate towards the back and now it doesn’t roll back flat or seal properly.


Jerry
9/20/2025
One year later and still doing well. I highly recommend them & would purchase again.


Katrina B.
2/7/2023
Holy wind strength! Luckily this has a 5 year warranty. I will send you more detailed information about contacting BAK in an email.

Katrina B.
2/23/2023
Holy wind strength! Luckily this has a 5 year warranty. I will send you more detailed information about contacting BAK in an email.

Steven
1/18/2024
The Tonneau Cover has been working Great no leaks. I really think this product works as advertised. I would and have recommended this product to other people.

Tim B.
8/25/2023
Two years in and still very pleased. I get compliments frequently for the tidy appearance and minimal bed capacity impact. One more gotcha I should note: when below freezing, it’s rigid and can be difficult to roll away. Generally a minor issue for me in the mid-Atlantic mid morning sun warms it enough that it’s OK. However, having spent time in NY last winter there were times I simply couldn’t roll it away without concern about damage. If you’re in a more northerly climate, be aware.

Brooke M.
6/27/2022
I see that this cover comes with a five year limited warranty. The manufacturer prefers to handle all of their own warranty claims. I will send you their contact information via email.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Brooke M.
7/25/2025
Lauren is great! So glad she was able to help you with this. The cover looks right at home on your new truck! Thanks for sharing the pics :)