Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
1993 Dodge Colt
We'll connect you with nearby partnered installers who know this exact setup.
Access Toolbox Edition Soft, Roll-Up Tonneau Cover
Part Number: A62439
$593.30
Retail:$698.00
You Save: $104.70
1993 Dodge Colt
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (138)
- Q & A (0)
- Photos
Access Tonneau Cover - A62439
Highlights
- Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
- Secure Gear Behind Toolbox: Fits behind most 19"–21" toolboxes with a tight, weather-blocking seal.
- Weather Protection That Lasts: Double-coated UV vinyl and Element seal keep rain, snow, and dirt out.
- Full Bed Access Fast: Rolls up in seconds and stores neatly behind the toolbox with premium straps.
- Locks Down Cargo: AutoLatch II system secures both sides when closed; tailgate lock adds full security.
- Easy Fit Control: XT-Dial tension adjuster fine-tunes cover tightness without tools.
Features to know about
Work and Weather Ready: Tight Toolbox Fit
This cover is made for trucks that need both a toolbox and a sealed bed. It fits neatly behind most 19"–21" over-the-rail toolboxes and sits 1-1/2" above the bed for extra covered space. The front header bar forms a tight barrier against the box while the Element weather seal and reinforced vinyl flap at the tailgate keep out rain, dust, and snow. Even when closed, both the cover and toolbox stay fully functional so you can grab your tools without removing anything.
Reliable Everyday Use: AutoLatch II Dual Locking System
When you roll the cover down, the Deluxe AutoLatch II automatically engages two locks—one on each side—to hold it closed. Just pull the release cord for one-handed access when you need to open it again. Locking the tailgate (lock sold separately) keeps everything inside secure, so gear stays protected when the truck is parked or on site.
Always Smooth and Tight: XT-Dial Tension Control
Temperature swings can loosen a soft cover, but this one solves that with an easy-grip XT-Dial tension adjuster at the front near the toolbox. Just turn the dial to fine-tune how tight the vinyl sits across the bed—no tools required. The cover stays smooth and quiet on the highway without sagging or flapping in wind or heat.
All-Season Durability: Double-Coated Vinyl and Aluminum Frame
The double-coated, UV-resistant vinyl keeps its shape in harsh sun and stays flexible down to -40 °F. Contoured black powder-coated aluminum rails and bows resist rust while supporting the fabric as it rolls up. The aerodynamic Slantback design helps reduce drag and can improve gas mileage by up to 10 percent.
Full Bed Access in Seconds: Roll-Up Design
When you need to haul large cargo, peel back the hook-and-loop sides and roll up the cover. Premium straps hold it tight behind your toolbox so it won’t rub or block visibility. The rails mount inside the bed rails using aircraft-grade aluminum clamps, leaving stake pockets open for racks or tie-downs—ideal when your truck pulls double duty for work and play.
Specs
Fitment and Compatibility
- Fits behind most toolboxes: 19" - 21" wide, over-the-rail
- Tonneau position: Sits 1-1/2" above truck box when closed
- Profile: Standard profile - inside bed rails
- Tool box compatibility: Designed to install directly behind over-the-rail toolboxes
- Rack compatibility: Yes
- Tailgate compatibility: Opens at tailgate; compatible with MultiPro tailgate
- Tailgate lock: Cover provides security when tailgate is locked (lock sold separately)
Construction and Materials
- Cover material: Double coated, reinforced UV-blocking vinyl
- Vinyl properties: Retains shape, won’t fade, remains flexible down to -40°F, and resists shrinkage
- Rails and bows: Contoured, black powder coated aluminum (resists rust)
- Clamps: Aircraft-grade aluminum Tight Bite clamps with integrated teeth for secure grip
- Weather seal components: Front header bar and Element weather seal behind toolbox; reinforced vinyl flap at tailgate
Design and Features
- Design style: Slantback design for a streamlined appearance
- Operation: Soft roll-up tonneau; rolls up in seconds for full bed access
- Storage: Stores neatly behind toolbox with premium straps and clips
- Security: Deluxe AutoLatch II automatically engages 2 locks when closed
- Release mechanism: One-hand release for easy operation
- Tension adjustment: Easy-to-grip XT-Dial allows tool-free tension adjustment
Installation
- Mounting style: Inside truck-bed rails (leaves side rails free for stake-pocket accessories)
- Clamp quantity: Includes 6 clamps for short-bed trucks or 8 clamps for long-bed trucks
- Bed liner compatibility: Fits under-the-rail, drop-in bed liners; over-the-rail liners may require trimming
Performance
- Wind resistance: Aerodynamic design reduces drag, can improve gas mileage by up to 10 percent
- Weather protection: Integrated vinyl seals and waterproof foam gaskets block rain, snow, and dirt
Warranty and Origin
- Warranty: 5-Year limited warranty
- Country of manufacture: Made in the USA
62439 Agri-Cover Inc. (ACI) Tool Box Rollup Truck Bed Cover
This Product Fits The Following Vehicles
- 2020 - 2027 GMC Sierra 2500 8 Foot Bed
- 2020 - 2027 GMC Sierra 3500 8 Foot Bed
- 2020 - 2027 Chevrolet Silverado 2500 8 Foot Bed
- 2020 - 2027 Chevrolet Silverado 3500 8 Foot Bed
Ratings & Reviews
4.5
138 reviews
by:
Gdubb
03/31/2025
I like the design of the Tonneau cover and how it looks, the ease of installation and the follow up support of etrailer. The shipping was pretty fast but there was a portion on one of the side rails that should not have passed quality control at the manufacture. I contacted etrailer, sent in a few pictures of the damaged rail and within a few days got a replacement rail shipped to me. That’s why I like doing business with etrailer!
by:
Ralph
07/11/2025
Easy to install. Nice fit. Good look. Kit included a seal for both sides of the toolbox.
by:
Steven
11/04/2025
chevrolet
Silverado
Perfect fit for my 2021 3500 Silverado (8-foot bed) with a cross-bed storage box. Rolls up snug when we have the 5th wheel hooked up. Stays taught when extended and covering the truck bed. After one year I'm very Pleased with this product.
by:
David
01/01/2021
Excellent product, took a few times adjusting the position to get the perfect fit. Just take your time and the payoff will be worth it.
by:
Larry
09/09/2022
Works as described. Easy install, easy to roll up for bed access and even easier roll back into place. Matches up to the toolbox perfectly. Very eased with the cover.
Customer service was a pleasure to speak with, they made certain I had the correct product and knew what I was purchasing was for use with a toolbox.
I've bought other items from etrailer and have never had a bad or unpleasant experience.
Customer service was a pleasure to speak with, they made certain I had the correct product and knew what I was purchasing was for use with a toolbox.
I've bought other items from etrailer and have never had a bad or unpleasant experience.
by:
Doug Ader
10/06/2023
2024
Chevrolet
Silverado 3500
Directions were somewhat to be desired but after a couple of U-tube videos we got it
by:
Dennis
11/09/2023
Excellent product. Simple installation instructions. Still
Looks brand new. As always, it shipped promptly. Great service as usual.
Looks brand new. As always, it shipped promptly. Great service as usual.
by:
Matt
10/08/2022
Easy install, fits well. Mostly water-tight, but there are some small areas where water can seep in - not an issue for me. Like all metal on metal fasteners, they will loosen - use thread lock and you will be good to go.
by:
Kevin
01/08/2025
by:
Ron
11/30/2021
by:
Dane
10/18/2026
This cover was exactly what I was looking for, easy to install, Toolbox compatible, and waterproof.
Andrew N.
10/20/2026
That's great to hear! It also looks really good on there :). What kind of toolbox did you go with?
by:
Tim
06/16/2025
After a little over a year, this tonneau cover is still working great and is a perfect fit with my crossover toolbox.
Gwendolyn Y.
6/18/2025
It still looks brand new, Tim! I'm glad to hear you love the cover so far!
by:
Rick
06/30/2026
The tonneau fit really well and worked with my Silverado. However, customer service is one star at best. I sent pictures to a representative of my truck and toolbox and she said the tonneau I picked out for him would not work with my toolbox. She then recommended another tonneau that she said was made for my toolbox and truck (I pull a fifth wheel so that made things difficult.) I ordered the one she recommended but it didn’t work either. I emailed her and nothing but crickets. I got an email from a different representative asking how things went and I explained the whole mess and again, nothing but crickets. I had to really get creative to get it to work and now it does, but it’s tricky getting in the tool box. Disappointing to say the least. I’ve ordered from etrailer before and had good experiences. This time, 5 star product, one star customer service.
by:
Tyler
08/07/2025
2014
Ford
F-150
The measurements were a little off for the gap of the tailgate and I had to readjust after install of the side rails. Also there were some cuts after pieces were painted it looked like. Unsure if this was done to adjust a common part to make work for several different bed styles or what. Still needs a few adjustments on my part but overall am happy with it.
Directions could of been a little better as well but I was able to fumble through.
Directions could of been a little better as well but I was able to fumble through.
by:
Craig
04/16/2025
2023
Ford
F-350 Super Duty
This tonneau cover is great! It fits and looks perfect. The quality seems very good and should last a very long time.
Craig
4/17/2026
The cover is still going strong. It looks the same as the day I installed it. No issues what so ever.
by:
Ken
01/27/2023
We travel a lot with our RV and frequently keep stuff in the back of the truck. I wanted something to hide it all. This cover is excellent. It looks fantastic and is easy to use (roll/unroll). Installation was okay but two sets of hands or clamps make it a lot easier. The instructions are just okay but it all worked out. The cover was a smidge short so I had to double-up on the rubber seal at the tailgate. No biggie. Also, no need to have a separate cover for my 5th wheel hitch. Very happy!
Ken
1/28/2024
After a year, the cover has been fantastic. No tears, rips or even fading. After a few months a plastic part broke but I called the company and they sent a replacement immediately. Im very happy.
by:
The Best Cover!
02/24/2026
2016
ford
F-250 Super Duty
Wow, this Tonneau roll up bed cover is absolutely great. I like the quality of all parts, ease of installation and finally the look! Installed on my 2016 Ford F250 Super Duty.
Kate F.
2/25/2026
The Best Cover, glad we had the right fit for you, you are happy with the fit and the quality. I am happy you are happy about your purchase =)
by:
Scott
10/02/2026
Instructions were a bit vague but I figured it out.
by:
Matt W.
07/06/2013
2013
Ford
F-150
Installed on a 2013 F150 with 6-1/2' foot bed. I had already installed a toolbox across the bed rails and then decided to add an Access cover since I knew I could get this tool box compatible version. I had an Access cover on a previous truck and knew I wanted the same brand again.
Plan on buying additional bulb weather stripping as the cap between the tool box and the front of the bed is wide depending on tool box width. My gap was wider than what came with the installation kit. You have to put the toolbox exactly where it needs to meet the bed cover header.
Installation was easy for the cover as the struggle was getting the toolbox weather stripping installed. I put the bulb seal in the kit on the front of the toolbox and then added my larger bulb weather stripping onto the front of the truck bed so that both mated up once the toolbox was put back into place per the instructions. Any local parts store should carry the seal material.
I do like how you need to open the tailgate to operate the latching system. If you lock your tailgate, it cannot be accessed. My previous Access cover had a push button you could use to unlatch the cover with the tailgate closed. Not great if you want to keep other out of your truck bed.
Plan on buying additional bulb weather stripping as the cap between the tool box and the front of the bed is wide depending on tool box width. My gap was wider than what came with the installation kit. You have to put the toolbox exactly where it needs to meet the bed cover header.
Installation was easy for the cover as the struggle was getting the toolbox weather stripping installed. I put the bulb seal in the kit on the front of the toolbox and then added my larger bulb weather stripping onto the front of the truck bed so that both mated up once the toolbox was put back into place per the instructions. Any local parts store should carry the seal material.
I do like how you need to open the tailgate to operate the latching system. If you lock your tailgate, it cannot be accessed. My previous Access cover had a push button you could use to unlatch the cover with the tailgate closed. Not great if you want to keep other out of your truck bed.
John B.
7/24/2013
I have a 12 inch tool box installed on my 2013 ford F150 sxt can I grt a cover to fit this truck.
Patrick B.
7/24/2013
The Access Toolbox edition covers will only work with tool boxes that are 20-21 inches wide. With a 12 inch wide box there will be a large gap and the tonneau will not work as designed.
Nathan D.
12/20/2013
Is this option able to work with a back rack toolbox combo?
Patrick B.
12/27/2013
The objects in front of the tonneau, between the tonneau and the cab, would have to total 20-21 inches. Measure from the inside edge of the truck bed up at the cab, and back. If your tool box does not end in the 20-21 inch windown, the tonneau will not properly fit.
by:
Paul
09/14/2020
The cover fits well over the truck bed and snug against the tool box. RAM 3500 with 8' bed.
Paul
9/15/2021
The cover is still functioning well.
by:
Dick S
12/18/2021
Cover has lived up to expectations. Easy to install. I integrated it with a 5th wheel tool box which conveniently allows separate access to either. Protects my hitch from the elements when I am not towing. Easily rolls up and down. When rolled up, it does not block my rear view when I hitch my 5th wheel. Stays securely fastens when closed. No water intrusion, even in a car wash. Every couple of months I apply a good coating of a quality vinyl UV protectant.
by:
Byron
10/27/2024
Ford
F-350 Super Duty
Surprised by the early delivery! Installation instructions need some help, but the product is just what I wanted for our '20 F350 DRW.
Byron
10/28/2025
Cover has worked well - all that I expected it to be.
by:
Dennis
02/19/2026
happy with the results they all where not installed yet but measured the pieces and they and were all within tolerance went to Home Depot and bought some weather stripping as the tool box (huskie) WILL HAVE TO BE FARTHER out so you can open it full without hitting the rear window and still have a water tight seal
by:
Lamar F
09/29/2023
2015
Chevrolet
Silverado 1500
I've been looking for years for a cover to fit my bed with the toolbox and all I ever heard was they don't make them. I love this cover and thanks etrailer. I was a little confused with the instructions provide, so it was a combination between the video and instructions that helped me complete the task. I really recommend if your in the market for this kind of tonneau cover.
by:
Terrance
10/13/2026
Had to return it
25
138
true
Show More Reviews
See what our Experts say about this Access Tonneau Cover
- Recommended Toolbox with Aluminum Rolling Tonneau Cover for 2020 GMC Sierra 3500There are limited solutions for the tool box and rolling hard cover. I recommend the UWS Truck Bed Chest - Secure Lock Under Tonneau Series - 8.85 cu ft - Bright Aluminum # UWS08297 or the UWS Truck Bed Chest - Secure Lock Under Tonneau Series - 8.85 cu ft - Matte Black Powder Coat # UWS08298. I then recommended the BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black # BAK54ZR. If you aren't absolutely needing a hard tonneau, then the Access Toolbox Edition...
view full answer...
- Tonneau Cover That Will Fit 2020 Chevrolet Silverado With A Toolbox And 8 Foot BedAs you can see in the picture I've included, when rolled up the cover sits lower than a normal tool box. These tend to sit about 3-5 inches above the rails of the truck. The access Tollbox Edition Tonneau # A62439 will be around 4-1/2 inches when rolled up and will fit your 2020 Chevrolet Silverady 3500. Since it's a soft tonneau cover, you could always take some ties to scrunch it down a bit more.
view full answer...
- Access Tonneau Cover for a 2020 Chevrolet Silverado 3500 with a Toolbox in an 8-Foot BedI spoke with Access. The Toolbox Edition Soft, Roll-Up Tonneau Cover, part # A62439, is designed to fit behind toolboxes that between 19" and 21". With yours being only a half-inch longer than that, they stated that it would be a tight fit, but it should work out fine. You may have to lodge it all the way on top of the bulkhead, but they were confident that you shouldn't have a problem with this cover on your 2020 Chevrolet Silverado 3500.
view full answer... - Recommended Tonneau Cover and Toolbox for a 2021 Chevy Silverado 3500 8' BedI have a excellent toolbox and tonneau cover combo option for a 2021 Chevrolet Silverado 3500 with 8' bed, the Access Toolbox Edition Soft, Roll-Up Tonneau Cover part # A62439 with UWS Low Profile Truck Bed Toolbox part # UWS07730. This combo will allow you to access the toolbox without having to mess with the cover. It's the only combo of it's kind I am aware of. I am not sure what type of toolbox you were looking for but if this was not it just let me know.
view full answer... - Does Access Toolbox Edition Tonneau Cover Work w/ MultiPro Tailgate on 2021 GMC Sierra 3500 Long BedGood question, and the MultiPro tailgate on your 2021 GMC Sierra 3500 is 100 percent compatible with the Access tonneau cover you asked about; the correct fit for the Toolbox Edition on a '21 Sierra 3500 with an 8 foot bed is the following: - Access Toolbox Edition Soft, Roll-Up Tonneau Cover # A62439 This tonneau sits just above the actual tailgate, so it won't interfere with either the fit or the functionality of it on your truck. I have added a link below to a video review for you...
view full answer... - Recommended Tonneau Cover for 2021 GMC Sierra 3500 with DRW Used with Transfer Tank/Tool Box ComboI may have a solution for you, but as of April 2021 there are not any powered retractable tonneau covers that are available for a 2021 GMC Sierra 3500 DRW. I'll add that I do believe you might have issues finding a transfer tank/tool box combo that is short enough to fit under a tonneau cover and also does not interfere with the cannister on a retractable cover. I do believe the reason that the # PE62CV won't function with the DRW models is the bed rails are slightly different on those...
view full answer... - Tool Box Compatible Tonneau Cover for a 2022 Sierra 3500I have a great tonneau cover for your 2022 Sierra 3500 that will accommodate your tool box and be long enough for an 8' bed. It is the Access Toolbox Edition Soft, Roll-Up Tonneau Cover item # A62439. This cover is designed to fit behind your toolbox. It features a tight seal between the toolbox and cover and it works with 19" - 21" wide tool boxes. The tonneau sits 1-1/2" above your GMC Sierra 3500's bed.
view full answer... - Does Access Toolbox Tonneau Cover # A62439 Fit with Multi Pro TailgateThe Access Toolbox Edition Tonneau Cover part # A62439 does fit the 2022 GMC Sierra 3500HD long bed with the multi-pro tailgate and does not require any additional seals.
view full answer...
Do you have a question about this Tonneau Cover?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Chris R
Updated by:
Matthew S
Written by:
Mark S
Installed by:
Adam E
Video by:
John S
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
4/1/2025
Well thank you! I'm happy we made it right :) Thanks for sticking with us