To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Many covers make you choose between bed protection and hauling space. The TonnoSport rolls up easily toward the cab so you can use the full bed whenever you need it. A nylon strap and strong buckle keep the cover secure while driving, so there’s no need to remove it. When it’s time to close it again, just unroll the soft vinyl top and press it into place along the rails—it seals up fast and clean.
If you prefer a sleek setup that doesn’t change the truck’s lines, this cover fits the bill. It sits just 1/2 inch above the bed for a flush, aerodynamic appearance that’s subtle but sharp. The low-drag design can even help improve fuel mileage by up to 10 percent, all while keeping wind noise down on the highway.
The TonnoSport locks automatically when closed, thanks to its trigger latch system. Slide locks on each side add another layer of security, keeping the bed protected when the tailgate is locked. You can open the tailgate anytime without removing or undoing the cover, and releasing it takes just one quick pull on the latch.
Changes in weather can loosen some covers, but this one stays tight year-round. The EZ-Dial tension system lets you fine-tune the fit with a simple twist—no tools required. A Velcro edge keeps the vinyl secure against the aluminum rails so it won’t flap or gap in the wind.
Installing the TonnoSport is straightforward and tool-free. Six aircraft-grade aluminum clamps grip the bed rails with Tight Bite teeth for a solid hold. Once the rails are on, the cover rolls out smoothly and attaches along both sides. The UV-resistant vinyl top and rustproof aluminum hardware give it the strength to handle everyday use and all-season exposure.
| Access TonnoSport | Other Access Covers |
|---|---|
| Straight, unpainted aluminum rails and support bows | Contoured, black powder coated aluminum rails |
| A single nylon securing strap | 2 Nylon securing straps |
| EZ Dial barrel-style tension adjustment | XT Dial easy-grip tension controls |
| Weather seal that runs along the truck bed sides | Full-length weather seal that runs along truck bed sides and continues along the cab side of the box |
| 2-Year limited warranty | 3- or 5-Year limited warranty |
| Affordable, entry-level alternative | Feature-rich covers with prices to match |
Ratings & Reviews
The quality is ok for the money but the installation instructions could use some improvement. I tried to follow them and finally had to figure it out on my own. It could also use some type of seal between it and the front of the bed. I am sure the first rain its going to leak.
Latch has an interference. Knew about the interference with the rollup and the in-bed hatch. Looks like they just shortened their standard product without regard to any special requirements of the Santa Cruz.
Fit ment was perfect, way better then what i expected, thanks again...
Good product and Very fast shipping
Arrived on time. Had it installed today looks great. Very pleased with my cover. Thanks very much
Fast delivery, great communication, fit perfectly on 98 chevy ,absolutely would order again and the price was very reasonable..
Installation of this product is very difficult for Hyundai Santa Cruz (2025). The 2 sets of instructions are some of the worst I've ever seen plus you'll need to cross reference videos online for other models of trucks to fill out the missing information. I have it installed which look ok but it still needs more adjustment. Also when rolled up the Santa Cruz's back support frame next to the cab window area tapers up together at the top so the roll up doesn't fit up to the cab back window. I'll need to by clip extensions to hold it in it's rolled up position.
When installing the rails they would not sit square after tightening the clamps. The bed I have on my Santa Cruz has a plastic liner. Not sure if that was the problem. My son-in-law put two washers behind each clamp in order to square up the rail. That seemed to work. After the headache of trying to figure out how to correct the problem our solution worked. The cover itself looks great on the truck.
Very well built just poor instructions on installation. Would buy again.
Hard to find size, so I appreciate finding it and it being advertised appropriately. Easy enough to install and looks good. If I could change something, the side rails are mounted inside bed, would be nice if they could go on top of the side wall to not take up that space
I like the cover. Instructions could be a bit clearer. Had to still look up a video for installation.
The customer service at eTrailer is absolutely outstanding. They have a great process other companies should follow. I reviewed all the applicable tonneau covers and videos for my 09 Dodge 3500 4x4 LB many times before I chose the Access TonnoSport Soft, Roll-Up. It had to be compatible with complete access to a tool chest & 5th wheel. Once I received the item, the directions described the pieces in "Access's" technical terms. Some pics were dark contrasted, hard to figure out, drawings would have helped. I made slight adjustments according to the troubleshooting page. Overall, pleased with product & the outcome.
Love it - have had it for a year and its held up great. Compatible with bed rails.
For the price and install time, I really like the cover.
After installation the fit was great.
The only thing is it wasn't very clear how to install the cab weather strip but I got it.
Overall it has been a great product. I do wish that it wasn't so baggy. But, I understand that the material it is made from tends to do that depending on temperature.
It fits and looks great. Shipping was extremely fast!! I didn't give it a five star rating because the cover mounting instructions were very difficult to follow and not specific to my compact pickup truck.
The install was easy,I installed it by myself. I have taken it through 15 car washes, it has been through 3 rain storms and has not let any water into the bed. If purchasing again I would get the same exact one as i love the extreme low profile.
Good value. After one year in the hot Georgia sun, an especially cold winter, and lots of recent rain; the cover continues to hold up well and looks as good as the day I installed it. The installation was fairly easy, but the instructions could use improvement. However, with a little patience the result is nearly a custom fit. I have no negative comments regarding the quality and effectiveness of the product. Easy to use and keeps cargo dry even in the hardest of rainfall.
Looks fantastic on my 2016 Nissan Titan XD I love the low profile
Install was less than 15 mins following the included instructions.
Works well with the Utili-track installed in my bed.
Highly recommend.
These covers are the best. Getting this one for my 3rd new truck in 14 years. The last one is still in great shape and handled a 40" snow load in 2021. That cover was 5 years old at the time.
Product is great the directions not so great. After the bulkhead rail and side rails are put in tonneau cover should be rolled from the back to the front so you know exactly where everything's going.
The cover fits perfect on my 2024 Silverado. It was pretty easy to install with help from a installation video. I took my time and it took about an hour to install. I needed this type of cover so I could install my ladder racks.
Great cover for a fair price. Easy installation and a sleek, seamless look. This cover is far superior to the one this truck had for its first 25 years.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.