Repair kit contains the most frequently used, on-the-job repair parts for your Meyer snow plow. Narrow, plastic storage box stows easily under your seat.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna take a look at the replacement under the seat emergency repair kit for Meyers snow plow. This is going to be a really handy kit for whenever you're out plowing in the snow and something happens to fail on your snow plow. This is going to have a lot of the common parts that are going to need to be replaced so you can get out and back on the road safely.It comes with a box to house all of your parts. It's gonna be just a simple, sleek box that can fit under the seat easily. The box itself is going to measure 17.5 inches long by 7.75 inches wide and it's gonna be 2.50 inches tall. Inside the box, we pull out on those tabs on either side of it, or either end of it.
It helps if you can press down and then pull out on those tabs to release from the box.On the inside you'll see there's a label showing all the parts that the kit comes with, along with the part numbers so that if you we're to need to replace one of these parts, you can pick up that component separately.Now inside there we'll get our 45 inch hose with those connectors on either end. We'll get the eye bolt with nuts and a spring washer, the trip spring, the hydraulic quick coupler, the hinge pins with clips; this is going to come as a pair. Has those spring clips to get those in to place and to snap over and to keep those secure. Have a 90 degree swivel elbow as well as the motor solenoid with the hardware, which is going to be two larger nuts and two spring washers as well as a small nut and a small spring washer. It's to get all those connections made correctly on there.
And we'll also get four blade guide tips.Everything's gonna fit really nicely inside our box, so you can just pack everything back up. The only thing that doesn't quite fit in here is that solenoid. The bolt on the top there just makes it a little bit tricky to get this in place, but the box does have enough flex that it will still close with that in there. The best way I found to put it in there is just with the flat side at the top and then you can kind of get the box to flex over the top of it.To close it up, you'll just press down until you hear it snap and then you're ready to go.And that's gonna do it for our look at the replacement under the seat emergency repair kit for Meyers snow plow.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.