Hellwig Pro Series Helper Springs - Above Axle
This item does not fit your vehicle
2025 Ford Ranger
These items fit your vehicle
2025 Ford Ranger
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re towing a trailer or hauling a bed full of gear, these Hellwig Pro Series helper springs step in with up to 2,500 lbs of load-leveling support. They mount above your factory rear leaf springs to keep your truck from sagging and to maintain confident steering and braking under weight. By taking strain off your stock suspension, tires, and brakes, they help extend the life of the parts that do the heavy lifting every day.
Big loads can make a truck bounce or sway through corners, but these helper springs flex along with your leaf springs for a more stable, even ride. The progressive rate design automatically adjusts to match the load, so you get firm support when hauling and a comfortable feel when driving empty. It’s steady confidence whether you’re on the highway or backing up with a trailer attached.
No one wants clunks or rattles from the rear suspension. Hellwig’s Silent Ride urethane bushings keep noise down while letting the springs move freely with each bump. The durable steel construction and silver vein hammer-tone powder coat finish hold up against corrosion and wear, giving you lasting performance through years of towing and hauling.
Not every load sits perfectly even, so these helper springs let you fine-tune support where it’s needed most. The U-bolts can be adjusted for different loads, and each side can be set independently to handle uneven weight in the bed or trailer tongue. You get a level stance and balanced handling no matter how you stack your cargo.
Adding serious rear support doesn’t have to be complicated. This kit bolts above your existing leaf springs with included mounting hardware, making installation straightforward for DIYers with common hand tools. Once installed, it’s ready to go—no drilling or major modifications required for solid load control every time you hook up or haul out.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Aiden here at Etrailer. Today we're gonna be taking a look at the line of Hellwig Pro Series Helper Springs. This is gonna be a great solution to help enhance your suspension and help protect the factory suspension on your truck. Let's check it out. Now, the first thing to know is that these come in a variety of different shapes and sizes.
The ones in my hand are not the exact same as the ones installed on the truck behind me. So what you wanna do is take your vehicle information and plug it into our fit guide. Your year, make, model, will have a set of these that work for it, and that's the one you wanna pick up. So you can find the right one for you and your truck and they all install about the same way. I mean, it's the same idea where you've got U-bolts attaching this to your leaf springs, and for the most part, they will function the exact same way too.
So the idea behind these springs is that they become a maintenance free enhancement for your suspension, allowing you to get more support on maybe some bumpier, heavier loads and still let your truck ride at a normal ride height and bring it back to that factory ride height quicker. Rather than maybe hitting a big bump with a heavy trailer and your truck and trailer taking a long time to correct before again, you've just hit another bump. So it's gonna smooth out the ride quality, hopefully bring you out a little bit more level and do things like align your headlights and improve the contact that your front tires are making on the ground because we're sagging less. Now because these work in tandem with your factory leaf springs, it's also going to help reduce the stress on those, helping your factory suspension components last a little bit longer and not having them flex near as much because they have those helper springs, helping them out and reducing the amount that they have to work. And they are somewhat adjustable.
And what I mean by that is during the initial install process, there's gonna be some outer U-bolts that you tighten down a certain amount, tighten them down more, and you're gonna apply more preload, essentially causing these to engage a bit quicker and helping out with those heavier loads a bit quicker. Don't thread them in as much and you're not gonna feel it as much. It's gonna be more true to factory ride quality and better for the lighter loads. We've got ours set right in the middle right now, so after continued use we can re-evaluate and see what we need to do, but chances are you're gonna set it and maybe change it once to fit your needs a bit better after towing with it for a little bit and probably just leave it there. This isn't like an airbag where you've got that on demand filling or letting out air pressure to accommodate for a wide range of different trailers.
This is for your one trailer and truck combination that you can set and really dial it in because with an option like a sumo spring or a timber in, you're stuck with just that one setting. And if it doesn't quite work for your truck and trailer combination, you're gonna find yourself in a pinch where it just doesn't work super well. Whereas with this, if it doesn't work out of the gate as we want it, we can adjust it a bit and fine tune it from there. And that'll do it for our look at the line of Hellwig Pro Series Helper Springs. Thanks for watching.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
everything went like clockwork - thanks for your help. Will do more business in the future.
Easy install on 2015 NV2500. No noticeable difference in unloaded ride quality. Van is level for towing my RV.
Great add on for trucks someone was thi nking
good install. works well with a light or heavy load.
Everything showed up as scheduled and the box was fully intact, all parts were accounted for. Now waiting for a good weather day to install.
Easy enough to install but the kit needs locknuts! Also a better example of how to adjust properly!
The only reason I gave the kit 4 stars is because Im a vistual person, the picture/ instructions for my spring mounting locations and where they acually mount up are different so I felt I was doing something wrong but finally got them mounted. The customer service I give (6) stars because the shipper damaged the box and parts fell out, called customer service had my missing parts in 2 days. 2023 GMC Denali 2500hd couldn't find an install video to use as a reference.
These spring are insufficient for my use. My fifth-wheel RV applies 2918lbs to the bed of my 2024 RAM 3500. Between the factory springs and the HE67QR kit, I'm left with about a 2" drop in bed height. During the day isn't a problem, but makes night towing a little dicey since the headlights are noticeable raised. The rubber insulators have lost a fair amount of resistance because of the squish applied while towing and can require the mounting nuts to be re-tightened after several uses to stop the shackles from rattling. These springs would probably be a better choice for loads at less than two thousand pounds.
I needed to play with every nut so it wouldn’t cross thread. It took a few minutes on each nut
What a great product! Unfortunately, even though the helper springs fit beautifully over the factory provided chassis leaf springs, the design of my Leisure Travel van has frame supports that prevent me from utilizing the helper spring set up. The clearances were too tight between the metal framing of my Leisure Travel van to her Mercedes 3500 cutaway chassis. All the other upgrades all went smoothly without any difficulty and the overall ride is so much I previously had. This is my third upgrade/Do it yourself Project from e-trailer and will not be my last, such a great company to work with.
The product is very well made and sturdy. The pro series was very easy to install. Overall I think it is going to work as I intended.
Still giving five stars, one thing that could improve are the instructions. Specifically torque specs. The table is helpful, but just spell it out in the instructions.
Directions not the best got very confused putting it on watched a lot of you tube videos they were not that good either. I did have problems with my nuts stripping on the foward u-bolts on both sides fwd of the axle. I did torque the nuts with a calibrated torque wrench. Not sure if it was caused by me or the poor directions. Reached out to the manufacturer he said never heard of that before and said he would send new hardware. I am out of state in a rv park will see what happens when I reinstall. Oh had to cut it off in a Safeway parking lot on my way to TX
Works great! Easy to install and definitely helps with level towing
No more squatting the back end of my truck!
Quick shipping decent price, good produ ct.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
3/15/2024
I am sorry that you had to resort to getting new hardware for your installation. I am glad that the manufacturer is sending you some new hardware. It is easy to overtighten the hardware, which results in the hardware stripping. I am not saying that is necessarily what happened in this situation, but we always recommend to make sure that we torque only to the specs in the instructions.