To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
7,500-lb Capacity. 7" Diameter LoadLifter 7500 XL air springs upgrade your rear suspension for high-quality, full-time load support. They level your vehicle, improve braking and ride comfort, and reduce the strain on your factory suspension.
Features:
Specs:
LoadLifter 7500 XL springs have up to 20 percent more air spring volume than LoadLifter 5000 springs. The available volume in these 7" double-bellows air springs enable greater leveling strength at lower pressures. This ensures maximum load-lifting abilities and a great ride quality no matter the load.
The internal jounce bumper prevents you from damaging your system when driving with an uninflated or underinflated air bag.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer. Let's take a quick look together at this Air Lift Loadlifter 7,500 XL Rear Axle Air Helper Spring Kit. Now this kit has been designed to fit your 2016 and current Chevrolet Silverado and GMC Sierra 3500s, the cab and chassis, and on custom fit parts, such as this kit, I do recommend taking advantage of our vehicle fit guide here at etrailer. Simply input the year, make, and model of your vehicle and our fit guide will confirm if this will work for you or if we have something comparable that will work for you. Now as I hope you can see, I do kind of have these springs loosely put together with the roll plates and with the brackets 'cause I just kind of wanted to give you an idea of what this is going to look like put together and of what it's gonna look like on your vehicle.
Now this system is designed to help your truck stay level and feel more controlled when you're hauling or towing heavy loads. And this is gonna give you up to 7,500 pounds of load leveling support and that's gonna take away the a lot of the strain off of your factory rear suspension and it's gonna make your whole driving experience safer and smoother. Now what makes this setup stand out is the large seven inch diameter air springs. Because they have more internal volume than standard Loadlifter 5,000 springs, they're gonna give you stronger leveling support at lower air pressure. So what that means for you is better performance without the ride feeling stiff or harsh.
Now when you've got a heavy trailer or a bed full of gear, these air springs are gonna help keep your truck level from front to rear. So that's gonna help improve steering, braking and overall stability. It's also gonna help keep your headlights aimed properly and help prevent unseen, uneven rather tire wear. Small details that's gonna make a big difference on long drives or frequent towing situations. You're gonna be able to manually adjust the air pressure to match the loads that you're carrying, anywhere from five to 100 PSI.
So you're never gonna be over or under supported. Each air spring can be inflated independently too, which is great if your load isn't perfectly centered or you need side to side leveling. Beyond leveling, this system's also going to improve your ride quality. It's gonna help reduce sway, absorb road shock, and help your truck feel more planted and comfortable, even with heavy weight on board. These built-in metal roll plates that you see right here, they're gonna help strengthen these air springs and protect them from damage while an internal jounce bumper is going to prevent issues if the bags ever run low on air.
Now, durability is another strong point. Now these springs are made from two ply, fabric reinforced rubber and the end caps, let me just see if I can remove this here so you can see a little bit better. The end caps here use high strength Zytel nylon, which is lighter, stronger, and more corrosion resistant than steel. So everything that you need to install here is going to be here. You're gonna of course, get the brackets. So we've been talking about, again, these brackets are custom fit for your truck. I'll just put that on there carefully. Obviously, you're gonna have hardware holding everything together here. Like I said before, I just kind of have it set up here, but you're gonna get all the hardware that you need to get these springs installed into place. You saw the airlines here as well. Manual inflation valves, and by the way, the valves typically will mount on your bumper, giving you that easy access. Instructions are included as well. Now if you want more convenience later, you can always add an optimal compressor system with end cap gauges to monitor and adjust air pressure automatically while you drive. And that's something that you could take a look at on the related products tab on this product page. This is gonna be compatible with most fifth wheel and gooseneck hitches, but it is important to note that this system, while the system is going to greatly improve your load leveling and ride quality, this does not actually increase your truck's weight carrying capacity. So you do wanna make sure that you're not exceeding your manufacturer's recommended weight limits. If you happen to have any other questions, whether it's about this kit or anything else that we have here at etrailer, don't hesitate to reach out. We wanna make sure that you're getting exactly what you need. Well, again, my name is Andy, thank you for joining me.
Customer Satisfaction Score:
24% were satisfied with this product
76% of customers were not satisfied
Ratings & Reviews

Victoria H.
2/15/2025
That's too good to hear, Paul! Let us know what you think once you get to put them to the test.

Paul
2/14/2026
After a year we are very impressed with how smooth our ride is with the air ride system! We have put about 2500 miles on with our 42ft toy hauler and its great! We recommend the 7500 XL its a great product. From speedy delivery, great service, on the phone help etrailer was great all in all it was a great experience!

Michael
5/26/2025
I still love them as much as I did on day 1. They have made a huge difference in the ride quality of my truck when towing. I run them with 12 psi in them. Now to add the on-board air compressor.

Lauritz
2/12/2022
Awesome!

Nick S.
9/29/2025
That is awesome to hear! I agree the Timbrens are good but airbags tend to increase that ride quality more. I am glad these have worked well for you. What kind of 5th wheel are you towing?


Condition: Installed
Notes: There are install marks from previously being test fitted. All hardware is included.
Condition: Installed
Notes: There are install marks from previously being test fitted. All hardware is included.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Rob
3/27/2026
First review was for Air Pump AL7400. Item AL89DQ installed on 2025 F350 Longbox. LOVE THEM! The airbags make for a level tow for our 5th wheel that as a tongue weight of 3,100 lbs. The ride with the 5th wheel trailer at 70psi is much improved. Level and fills like you are riding on a cloud. Yes, when not towing, and filled to 7psi, the load is a little more stiff than without the bags. To be expected though. Prior to installation, take time to confirm you received ALL parts including hardware pieces as I was missing the required M10 x 1.5 nut. I suggest watching the video a couple of times and keep it handy to review again along with the written instructions during installation. One thing not in the video, I suggest to remove both rear shocks to make placement of the assembled air boots MUCH easier as it gives you more open area to maneuver each into place. Installation took about 8hrs laying on my garage floor. You will need both Imperial and Metric sockets deep wrenches to complete the job. Purchase a new tube cutting tool to insure a clean cut on your air tubes. $10 to avoid air leak frustrations is a bargain. As I have a long box, cutting the first tube to the correct length is a must as there is not much extra tube available. I think I had 6 inches of waste and could not route it my preferred way. Have additional zip ties available so you can snug the air tubes to an existing harness or frame location.