See what our Experts say about this Yakima Accessories and Parts

• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• Parts Needed To Install Yakima Platform On 5' Leer Topper
  Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54" Tracks for Roof Racks # Y26RR - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (you will need two of these) - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - LockNLoad SL...
  view full answer...
• How Can I Mount a Pioneer Platform to My RetraxPRO Hard Cover on My 2022 Ram 1500?
  I have an answer for you. Without knowing the exact bed size or whether you have RamBox installed on your 2022 Ram 1500, if you are looking to use a Retrax Pro model with the included rails like the RetraxPRO Hard Tonneau Cover # RTT-80245, I cannot guarantee that the Landing Pad 26 # Y75ZR fit into the dimensions of the tracks of the Retrax tonneau cover. Yakima unfortunately does not test their landing pads on other manufacturers' tracks, so there is no way to tell if the LockNLoad platform...
  view full answer...
• How To Attach the Yakima LockNLoad To a Yakima OverHaul HD On a Toyota Tacoma
  Yes, the Crossbar Clamps for Yakima LockNLoad Roof Rack part # Y05039 is what you need to install the Yakima LockNLoad Platform Roof Rack part # Y05044 on the Yakima OverHaul HD Truck Bed Ladder Rack part # Y01151-5868 which is a confirmed fit for your 2018 Toyota Tacoma. That said, you will need to order two sets of the clamps. The Yakima OverHaul HD Truck Bed Ladder Rack when paired with the Yakima LockNLoad Platform Roof Rack is by far the best option to carry a tent on your Tacoma...
  view full answer...
• What is Needed to Add Yakima LockNLoad to 2021 Subaru Outback With Side Rails
  Hey Jeremy, I believe you're asking what you need to mount the Yakima LockNLoad Platform Roof Tray # Y05044 directly to the side rails on your 2021 Subaru Outback, and if so, I verified directly with Yakima the exact parts you'll need: - SkyLine Towers # Y53TR - Landing Pad 27 # Y46VR - LockNLoad SL Adapters # Y05042-2 And that's it! These parts are all need to mount the LockNLoad directly to your Outback.
  view full answer...
• Will Yakima LockNLoad FIt 2010 Toyota RAV4 Factory Roof Rack
  Hey Austin, Yep, you can mount the Yakima LockNLoad Platform Roof Tray # Y05044 to the factory roof rack of your 2010 Toyota RAV4. You'd just need to get two sets of the Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039 so you can attach the platform to your RAV4 and you'd be set.
  view full answer...
• Can Yakima DeepSpace 10 Rooftop Cargo Box Be Installed on Yakima LockNLoad Platform Tray
  The Yakima DeepSpace 10 Rooftop Cargo Box # Y65RR can be mounted to the Yakima LockNLoad Platform Roof Tray, like part # Y05044, but you'll be using the clamps for the installation since the DeepSpace 10 currently (July 2023) doesn't have any T-Slot hardware. I confirmed with Yakima that this will work though so you'll be good to go with this combination!
  view full answer...
• Can I Size Down From A LockNLoad Platform B To A LockNLoad Platform K
  You should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part # Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems mounting the platform to your vehicle. Do keep in mind that you will need an adapter to mount this platform directly to your towers. The LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers - Qty 4, part # Y05042-2, will attach directly to your Yakima...
  view full answer...
  
• What Tie Downs Can I Use With The Yakima LockNLoad # Y05044
  The Ladder Pegs for Rhino-Rack Heavy-Duty Crossbars - 3" Tall # RSLP will not fit in the tracks of the Yakima LockNLoad Platform Roof Tray # Y05044, but I have something similar that you can use with the LockNLoad. The Ladder Pegs are made to fit in the rhino rack heavy duty crossbars # RB1375B-2. You can use the Yakima Eye Bolts # Y01162 with the lock in load on your 2019 Jeep Grand Cherokee.
  view full answer...
• What is Height of LockNLoad Platform Rack for LEER Camper Topper on a 2020 Nissan Frontier
  To install the LockNLoad on your 2020 Nissan Frontier 5' Bed LEER camper topper you need the following parts: - 55" Long x 49" Wide Yakima LockNLoad Platform Roof Tray # Y05044 - TrackTowers # Y52AV - LockNLoad SL Adapter # Y05042-2 The TrackTowers sit about 2" tall and the LockNLoad is around 4" tall so you'll be adding about 6" to the height of your LEER topper which is pretty standard for a track mount platform. You'll be pretty hard-pressed to find something only sitting 3-1/2"...
  view full answer...
• Yakima LockNLoad Fit For 2022 Chevy Suburban With Factory Roof Rack
  Hello Dave, Your 2022 Chevy Suburban with factory crossbars can mount the LockNLoad, but there are no cargo boxes compatible with it, including a Roam Adventure or any other box. If you did want to use the LockNLoad for other purposes, I verified with Yakima the correct LockNLoad size as well as clamps needed to fit your '22 Suburban: - Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide # Y05044 - Two Sets Of: Crossbar Clamps for Yakima LockNLoad # Y05039 Otherwise,...
  view full answer...
• How Many Crossbar Clamps Are Needed for Yakima LockNLoad Platform Rack
  In order to install the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide # Y05044 you will need two sets of the Crossbar Clamps for Yakima LockNLoad Platform Rack - Qty 2 # Y05039. So that will be 4 clamps total. Instead of buying them separately you can get the Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 55" Long x 49" Wide # Y05044-39 which comes with everything you need.
  view full answer...
• Crossbar Spacing For A Yakima LockNLoad Platform Rack On A 2018 Lexus GX 460
  The Yakima LockNLoad Platform Roof Tray # Y05044 (K) you're looking at requires that the spacing from the center of the front crossbar to the center of the rear crossbar needs to be 27" to 33" apart. The platform rack will most likely overlap with the sunroof.
  view full answer...
• How To Attach Yakima LockNLoad Platform Roof Tray To Factory Crossbars of 2020 Honda Passport
  The Yakima LockNLoad Platform Roof Tray part # Y05044 will fit to your factory cross bars with 2 sets of the Crossbar Clamps for Yakima LockNLoad Platform part # Y05039. This will be as low profile as possible with the factory cross bars, the clamps are 1" tall and the platform itself is about 4" tall.
  view full answer...
  
• How to Add Platform Rack to 2020 Toyota Highlander With Naked Roof
  While you can add a platform rack to your 2020 Toyota Highlander, I checked with our manufacturers and there isn't a direct-mount option for your vehicle. So the only option for your Highlander, assuming it does have a naked roof without flush rails, is to add a roof rack which you can then add the platform rack to. There is one option for this from Yakima, and I verified with them the correct parts for the rack, as well as the correct size of platform needed. The exact parts that will...
  view full answer...
• Fitting Yakima LockNLoad Platform Roof Tray to Round Crossbars
  The Yakima LockNLoad can fit round crossbars but you will need to use the Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039. RoundBar SL Adapters won't allow you to mount the platform to the rack, as they are designed to mount crossbars to certain Yakima roof rack towers. The Crossbar Clamps # Y05039 will fit LockNLoad trays like the Yakima LockNLoad Platform Roof Trays, which come in different sizes such as the 55" Long x 49" Wide # Y05044 and 84" Long x 62" Wide # Y05049.
  view full answer...
• Height of Yakima LockNLoad Above Crossbar Clamps and Cargo Basket Fit
  The Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039 are a total of 1 inch in height, but when they are clamped around your crossbars, the LockNLoad is almost directly on the crossbars, as it attaches right to the top of the clamp. These clamps will work with the Yakima LockNLoad Platform Roof Trays like the 55" Long x 49" Wide # Y05044 or 84" Long x 54" Wide # Y05048. As for the mounts, those will not work for a LockNLoad, and while you can't mount a rooftop cargo box to...
  view full answer...
• Is There A Yakima LockNLoad Platform For My 2018 Subaru Forester XT?
  Looking at the available platform style racks for your Forester, we've found that the best fit for your 2018 Subaru Forester is going to be the 60 inch long by 49 inches wide Rhino-Rack Pioneer SX Platform Rack # JA9133. There is no Lock N Load # Y05044 that we have confirmed to fit on your Subaru. This is the same exact thing just a different brand. This rack comes with the SX feet that will connect to your factory raised rails. You do not have to buy the Timberline Lockable Brackets for...
  view full answer...
• Smallest Yakima Lock N Load Platform For 2018 Ford Expedition
  The smallest size Lock N Load Platform made is 55 inches long by 49 inches wide # Y05044. You can use the same adapters and towers for this to fit on your 2018 Ford Expedition. This is the closest size to your panel you have.
  view full answer...
• Correct Yakima LockNLoad Platform Roof Tray For a 2016 Honda CR-V with Flush Side Rails
  In order to use the Yakima LockNLoad Platform Roof Tray on a 2016 Honda CR-V with flush side rails you will need to use the following; part # Y05044, part # Y53TR, part # Y05042-2, and part # Y00245. This will be a direct mount option which mounts to factory fixed points . The tray also mounts directly to the mounting feet so there is no need for additional crossbars and adapters.
  view full answer...
• Parts Needed to Install Yakima LockNLoad on 2018 Subaru Outback Limited for Rhino Rack Batwing
  The easiest solution would be to order the part # Y05044-39 as this is a kit that includes both the # Y05044 and the # Y05039. The Rhino Rack Batwing part # RR33400 would easily fit to this as well since it can attach to the channels that are present on top of the LockNLoad.
  view full answer...
• Can I Use The Yakima LockNLoad Platform Tray If My Facrory Crossbars Don't Adjust On My 2020 Rav4?
  The Yakima LockNLoad Platform Roof Tray # Y05044 is a pretty versatile tray as it gives you multiple points to mount it to the crossbars on your 2019 Toyota Rav4. All you need is two sets of the Crossbar Clamps # Y05039 and then once you put the tray on your roof rack, position it over your factory bars and use the clamps to secure it down! No need to have adjustable crossbars, the tray will have many different spots to connect the clamps! I've included a video of the LockNLoad so you...
  view full answer...
• Will the Rhino-Rack Pioneer Platform # JB0892 Fit on My 2014 Jeep Grand Cherokee with Flush Rails?
  I have a solution for you. As far as mounting a Pioneer platform 72" x 56" and Backbone like the # JB0892 on your black and chrome raised rails of your 2014 Jeep Grand Cherokee, I confirmed with Rhino-Rack that they do not have an engineered fit of that size of platform for your roof. Also, we do not carry a Backbone that is guaranteed to fit your roof. Regrettably, your rails will not work with the RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCL6 either. With that being...
  view full answer...
• Will Small Thule Caproc k Platform Tray Fit 2024 Subaru Forester with Raised Rails
  According to my research you'll be able to install the Small version of the Thule Caprock on your 2024 Subaru Forester. The parts you'll need to accomplish this are the following: - Thule Caprock Platform Roof Tray 59" Long x 52-3/8" Wide # TH58YE - Evo Raised Rail Feet # TH710401 - Lock Core Kit # TH450400 (optional) Yakima lists their 55" Long x 49" Wide LockNLoad Platform Roof Tray # Y05044 fitting your vehicle with their specific leg kit and they have photo evidence of this platform...
  view full answer...

Do you have a question about this Accessories and Part?