Custom Fit Roof Rack Kit With Y00221 | Y92TR
Item # Y72PB
Our Price: $733.80
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
- All Info
- Reviews (85)
- Q & A (0)
- Videos (3)
- Photos
Yakima Roof Rack - Y72PB
- Crossbars
- Aero Bars
- 2 Bars
- 53 Inch Bar Space
- Yakima
- Black
- Flush
This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's fixed mounting points or tracks.
Features:
Yakima SkyLine FX XL:- Integrated crossbar and tower system lets you carry cargo and accessories on your vehicle with fixed mounting points or tracks
- Flush design provides a streamlined, factory look - no crossbar overhang
- JetStream crossbars with top channels accommodate channel-mount and clamp-on accessories
- Push-down rubber strips in top channels allow for easy attachment of channel-mount accessories
- Sleek towers with matte finish are weather resistant
- Custom installation on your vehicle's fixed mounting points or tracks with Yakima Landing Pads
- Aerodynamic, lightweight aluminum crossbars resist corrosion and reduce wind noise
- Yakima Same Key System (SKS) lock cores (sold separately) deter theft
Yakima Landing Pad 1 (Set of 2):
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with C-shaped factory rack tracks
- Attach to factory tracks with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
8000221 Landing Pad 1 for Yakima Control or Sky Line Towers
8000181 Yakima Sky Line FX XL - Roof Rack Cross Bar for Fixed Mounting Points and Tracks
Video of Custom Fit Roof Rack Kit With Y00221 | Y92TR
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima SkyLine FX JetStream Aero Crossbars Roof Rack Review
Hi, Matt with etrailer, and today we're gonna talk about the Yakima SkyLine FX roof rack bars. So this gonna be a great option for you if you're looking for a system that's gonna be really easy to take on and off, and you have flush rails. So let's take a closer look at it. Now, this is gonna be able to fit multiple-sized roofs because these do have the ability to expand. You just have to plug in your vehicle into our fit guide and find out what's gonna be the best fit for you. The main appeal of this is how easy it is to take on and off your roof.
Now, you'll just have to make sure you take off all these caps. I've already removed the ones from the passenger side. As you can see right here, with everything removed like that, you just lift up on it, and it pops right off. Putting it back on is just as easy, just sliding on that end cap to finish it off until it clicks into place. Now, we take a closer look at the Yakima system.
Now, the bar itself is gonna use our Yakima JetStream bars that are gonna attach to these towers. And since this design is made this way, this is gonna be a flush-rail system. So what that means is we're not gonna have any overhang, so that's gonna give you more of a clean finish to your system, but it's also gonna take away some real estate of where you can put accessories on top of your bars, too. Now, since this it is a flush-rail system, we're only gonna be able to put our accessories in from one area. That's gonna be this center part on our crossbars.
And you're just gonna plug in whatever T-track accessories you have and slide it in through this channel. Now, what I like about this is it's gonna have this built-in rubber weather strip, and what that's gonna help do is reduce wind noise and keep any debris out of here. And what's really great about this weather strip and is that you don't have to cut this down to size since it is built in. Taking a closer look at the SkyLine towers now, if I just remove this end cap, which gives it that really nice clean finish to it, we can take a closer look at the hardware inside of it. Now, you'll notice we have this access door, and that's gonna lock everything down into place so no one can take this off real quick.
Now, I will say the lock core that we have on here is just a plastic lock core that you can unlock with a screwdriver or with some quarters. So it's not really that secure. Anybody could come by and take it off real quick. What I'd recommend doing is going to our website and checking out some of the Yakima lock cores that we have. And those will be metal lock cores that you can get keyed to lock to any of your other Yakima accessories, too. To take a closer look at the hardware underneath here, I'm just gonna unlock this access door, open it up. Now you'll notice we have two bolts in here. We're gonna have one on top, and that's gonna adjust your pitch. The way you'll adjust that is with an included Allen key. You just tighten and loosen that up. And what that's gonna do is change the angle of the crossbar itself to accommodate different types of roofs. If you are someone who's very particular on how this fits on your roof, then that's gonna give you more control. And the other setting we're gonna have in here is gonna be this bolt that adjusts your length of your crossbars to fit on top of your roof. So just to give you an example of that, what that's gonna look like. You just have to lift this up some, close that back in. You can even access it even with the access door closed. Loosen up that bolt some until it's loose enough to adjust. And once it is, then you can see how it telescopes, just like that. Now, I know we've been talking a lot about how this is gonna lock into place, and that's gonna lock into place to your fit kit. And you can find what's gonna be the best one for you using the fit guide on our website. Something that I really like about this design as opposed to some of the other Yakima crossbars is just gonna be how sleek it fits up here. You don't have to worry about anything that's bulky, hanging off the sides of it, and just how those towers fit onto those crossbars, it's just gonna give you an overall better look. Now, you're gonna have a weight capacity of up to 165 pounds, and what I recommend doing is just checking what your roof is rated for so you don't overload it. But if you liked everything you saw today, that's just a look at the Yakima SkyLine FX roof rack bars. Thanks for watching.
Customer Reviews
Custom Fit Roof Rack Kit With Y00221 | Y92TR - Y72PB
Average Customer Rating: 4.8 out of 5 stars (85 Customer Reviews)
This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's fixed mounting points or tracks.by: Frank P.03/06/2016
Fit good with the OE track on roof. I like the new covers they supplied with the mounts.
by: Bryan03/27/2024
Very nice and heavy duty. They don’t look too fragile on a lifted truck with oversized tires.
by: Rob04/19/2023
Honestly, I love etrailer. I love the expert help that you all provide. It's clear by the 1 year follow-ups that you care more about the relationships with your customers then just making a sale. Your service is friendly, informative and fast. I always come here first to look for my next purchase. Thanks again-Rob.
by: Aaron 02/10/2024
Perfect match
by: Pat G08/29/2013
Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash.
Will definitely be doing business with you all again.
by: Ric 07/22/2023
Honestly went back to etrailer after buying something i couldnt find on the big A before because their support was so good and delivery speed was soo fast.
by: William 01/11/2024
Shipment received, as ordered! Thanks again to Bryce D., for assistance.
by: Nelson06/26/2023
Ford
It was what it was advertised and fit perfectly on my 2023 Ford Maverick
by: Dan 11/06/2023
Great company! Fast delivery.
by: Jerry 07/29/2023
I have ordered several times from Etrailer and have always received efficient, timely and reasonable shipped items. Did not use customer service with this order but it has always been good.
by: Doug02/16/2022
First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.
by: See11/03/2022
with so many variables having someone that could sort through all them was very helpful Thanks etrailer
by: Hogan06/09/2023
I’ve placed 2 separate orders with etrailer in the last 6 weeks. Their service, response, pricing and follow-through have been terrific each time. I will use them every chance I get.
by: John02/18/2022
These will mount to the rhino rack tracks so I could use my Yakima control towers and rack.
by: Luke 07/24/2023
Works as described
by: Earthdog Mom05/11/2023
Quality product, timely shipping, transported with care. Packaging received fully intact with no damage.
Thank you etrailer for yet another great ordering experience!
by: Dennis08/15/2019
1996 Ford Explorer
Om my 1996 Ford Explorer, after the plastic factory cross bars failed, I was able to use the etrailer web site and tech support to determine that landing pads were available that fit the factory track and would allow me to use my Yakima towers and round bars. This was a great fix!
by: Matt08/17/2020
This company is great! I was looking everywhere for a set of crossbars that would fit my pop up camper. After not being satisfied with the options I called the customer service line and spoke with Crystal. She was great at recommending which parts would work on my camper. I had a lot of questions and she answered them all. If she didn't know the answer she found out for me. I installed my new crossbars on my camper this afternoon and they fit perfectly! They're solid as a rock! I'm so excited to use them!
by: Greg05/18/2011
Was very pleased with the Yakima racks and installation was a snap! First time customer of etrailer and was elated with whole experience! Shipping was lighting fast too!!! Will do business again...
by: Brad G02/04/2023
I ordered a Yakima roof rack system here and it was easy to find what I needed for parts to install on my truck cap. Very solid product and this company ships quickly every time I've ordered from them
by: KDS05/18/2019
Delivery was fast and efficient. Everything arrived in good shape with excellent feedback from the website. Have always had a great experience with etrailer.com
by: Mike 07/07/2022
Easy to order, best price. Not your fault due to supply chain was on back order. You followed through well. Appreciate not forgetting me or just telling me you cant get it. Nice work!
by: Clifford04/10/2018
Product worked well with my already installed Yakima rails and the towers attached to bars that I use on another vehicle. Easily installed. Now I can switch the kayak carrying Yakima bar and tower rigs from one vehicle to the other with minimal effort.
by: Mickey H03/27/2017
I've been using the roof rack a lot in the last year for recreation and for work. They give me confidence that the load will stay put, and arrive safely. I also take them off frequently since they hum happily at highway speeds, so I'm happy that the bars are easy to lock on or take off.
25
289
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Is There A Better Roof Rack Solution For A 2011 Toyota Corolla Than My Yakima Q-TowersThe aftermarket roof tracks, such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 39-3/16" Long - Qty 2, part # RRRTS534, are not test fit for vehicles. The rack manufacturers recommend that you to a garage that specializes in aftermarket body work to do the installation. It will be up to the shop you take your 2011 Toyota Corolla to determine whether or not the Rhino-Rack RT Style Roof Rack will fit your vehicle. If you get the OK for the Rhino Rack tracks you will need these...
view full answer... - Length of Crossbars Needed on ARE Cap for Thule Hullavator & Motion XT Cargo BoxYou can mount the Thule Motion XT Rooftop Cargo Box # TH629806 and Thule Hullavator Pro Kayak Carrier # TH898 on your Tacoma's ARE truck cap with Yakima tracks, but the 60 inch bars aren't wide enough. The Motion XT is 36" wide and the Hullavator takes up 28-1/2" of crossbar space so there isn't quite enough room for both to fit comfortably. What you will need instead are the 70" crossbars, the Yakima JetStream Crossbars 70" Long - # Y00427. Since you already have the tracks, the other...
view full answer... - How To Mount Yakima Towers In Retrax Tonneau Cover TracksIf you have the Yakima Skyline or Control Towers then you can use the Landing Pad 1 for Yakima SkyLine and Control Towers part # Y00221 to mount them into tracks/channels like those found on select Retrax Tonneau Covers.
view full answer... - Roof Rack And Kayak Carrier Recommendation For A 2022 A.R.E CXW Camper Shell On A Toyota TacomaThe rails on your A.R.E camper shell is made by Yakima, so to install a roof rack onto the rails, you will need: -4 Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027. -2 Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221. -1 set of the Round 58" CrossBars for Yakima Roof Rack System # Y00409. Since you also mentioned you wanted to carry kayaks, you can use the Yakima JayLow Kayak Carrier w/ Tie-Downs - J-Style or Post Style # Y04073, which will mount to...
view full answer... - Roof Rack Recommendation for a 1995 Pontiac Grand Prix 2 DR CoupeI recommend going with a Yakima Roof Track System for your 1995 Pontiac Grand Prix 2 Dr Coupe. This track mounts directly to the roof of your Grand Prix with PlusNut hardware. Installation does require drilling through the roof of your vehicle so if you are uncomfortable doing this yourself, I strongly encourage you to take your vehicle to a local body shop to have the track system installed. Each component for the Yakima Roof Track System is sold separately so in order to have the complete...
view full answer... - Recommended Tonneau Cover with Rails for 2019 Ford Ranger For Kayak or SUP TransportFor your 2019 Ford Ranger I recommend the Pace Edwards UltraGroove Metal Hard Tonneau Cover - Retractable - Aluminum - Matte Black # 311-KMFA31A62 for a 6 foot bed or # 311-KMFA30A61 for a 5 foot bed. The The T-tracks on the UltraGroove are designed to work with roof rack crossbars and other accessories. To add a set of crossbars to these tracks I recommend the Yakima 60 inch JetStream Bars # Y00425 along with the Landing Pad # Y00221 and Towers # Y53TR to attach them to the tracks. If...
view full answer... - Replacement Parts for Yakima Roof Rack Installed on 2011 Chevrolet Suburban with Roof TracksThe Yakima Replacement Hardware Kit # Y8890028 that you referenced is the correct one for use with their Landing Pad 1 for roof racks. The Yakima Landing Pad 1, part # Y00221, is the correct one for your 2011 Chevrolet Suburban with factory installed roof tracks. Please see the linked page.
view full answer... - Recommended Roof Rack System for A.R.E. Camper Shell with TracksThe items mentioned in your question are exactly what you need to install a roof rack system to the A.R.E. Camper Shell on your Ford F-150. Just to confirm, you will need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper...
view full answer... - Will the Rhino Rack Tracks Work with Yakima Control Towers and What Is the Length of Mounting BoltsThe 63 inch Rhino Rack RTC Style Roof Rack Tracks, # RTC16, come with 8 T-bolts for each track, 16 total, and each T-bolt measures 1 inch long. Although manufacturers typically do not recommend using another company's towers on their track, I went to our warehouse and pulled a set of the RT Style Rhino Roof Tracks and the Yakima Landing Pad1, #Y00221 to perform a test fit to ensure compatibility. All parts performed just as they should so yes, the Rhino Rack RTC Style Tracks will work...
view full answer...
- Is Yakima Landing Pad 1 Compatible With Rhino-Rack RTC-Style Roof Rack Tracks - Channel MountYes, the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long - Qty 2, part # RTC18, will work with Yakima's Landing Pad 1. The rack will consist of the following; SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4, part # Y53TR, Two pair of Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2, part # Y00221, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204, and the correct sized Yakima crossbars. The...
view full answer... - Can I Put a Tent on Top of My 1995 Jeep YJ with a Hardtop?While we do have roof rack systems that will fit your jeep, the issue is that your roof has a maximum weight capacity of 100 lbs. Even if you got the roof rack system with parts # Y00426, # Y01126, # Y53TR, # Y00221, you wouldn't have enough weight capacity for a tent. For example, the Yakima Sky Rise Tent # Y07436 weighs 101 lbs on its own and requires a roof weight capacity of at least 165 lbs. Your options from here is to either try to find an exo-style system to increase your roof...
view full answer... - Yakima Roof Rack and Bike Rack Recommendation for Tracks on a Pop-Up CamperFrom the looks of your photos, you have the Yakima Round Crossbars like the # Y00411 along with the old Control Towers # Y8890027. If you are looking for a newer model of crossbars that have a more aerodynamic design that fit into the tracks, I recommend the following setup: - Yakima JetStream Crossbars - 70" # Y00427 - Yakima SkyLine Towers # Y53TR - 2 sets of the Landing Pad 1 # Y00221 - Same-Key Locks # Y07204 With this setup, the JestStream crossbars create a much quieter ride and...
view full answer...
- Roof Rack And Cargo Carrier For 2001 Ford ExcursionWe do offer a roof rack system that will fit your 2001 Ford Excursion with the factory side rails. I recommend the Yakima roof rack that has 58 inch round crossbars. When ordering this roof rack system you will need to order part # Y00409, part # Y00221, part # Y03536, and part # Y53TR. We currently do not offer any roof baskets that have open ends as you are describing. The largest roof basket i can recommend is the Surco Safari Rack 5.0 Rooftop Cargo Basket, part # SPS5084-Y400. This...
view full answer... - What Yakima Roof Rack Do You Recommend For My 2022 Toyota Tacoma With A Camper ShellYou will be able to put Yakima tracks on your shell. The rack will consist of the following: Yakima 42" Tracks for Roof Racks, part # Y01126 Yakima CoreBar Crossbars, part # Y00421, SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 1 for Yakima SkyLine and Control Towers, part # Y00221, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. The crossbars have a weight limit of 220 lbs, but check your shell owner's manual to find out its weight limit. Your racks maximum...
view full answer... - Parts Needed to Add Yakima Rack to Thule Tracks on Leer CamperYep, you can put a Yakima roof rack in the Thule tracks on your Leep truck cap. I'll go ahead and list out the parts you need: - (Order a quantity of 2 of these) Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - SkyLine Towers for Yakima Crossbars # Y53TR - 50" Long Yakima JetStream Crossbars # Y00425 OR - 60" Long Yakima JetStream Crossbars # Y00426 OR - 70" Long Yakima JetStream Crossbars # Y00427 You'll want to measure the width of your tracks and get ones that extend...
view full answer... - Landing Pad Recommendation for Yakima Roof Tracks Y01127 for Installing 48 inch Round CrossbarsThe correct landing pad to go with the Tracks part # Y01127 is the Landing Pad 1 part # Y00221. Then for control towers you would need part # Y8890027 for individual towers, and then for 48 inch crossbars part # Y8810021.
view full answer... - What Are Yakima Shear Blocks Y8810006 and Yakima Shear Block Bases Y8810007 Made Out OfThe Yakima Shear Block # Y8810006 you mentioned are made out of aluminum, and the Shear Block Bases # Y8810007 are made out of a tough Zytel nylon. You may be able to modify these to secure your Yakima round bars to the side of your trailer, but these towers were designed to attach to rain gutters like what you would find on some Jeeps. You may be able to modify these components to allow them attach to a flat surface but I do not have any information on what would need to be done. To...
view full answer... - Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack TracksYes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following: 48" Round Bars - # Y00408 58" Round Bars...
view full answer... - Roof Rack for Leer Cap With Factory Tracks on 2015 Ram 1500You can absolutely get a roof rack for the factory tracks of the Leer cap on your 2015 Ram 1500. I have spoken about this exact issue with Yakima and they have told me the exact parts you need for a roof rack on your truck cap, which is the following: - Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2) - SkyLine Towers for Yakima Crossbars # Y53TR Crossbars (the correct length will depend on how wide the tracks are on your Leer cap, so just be sure to measure and then choose...
view full answer... - How to Order Yakima HardTop Roof Rack without Roof TracksYou'd need two sets of the Landing Pad 1 # Y00221, the 60 inch CoreBars # Y00422, and SkyLine Towers # Y53TR and you'd have everything the discontinued Y01618 has without the tracks.
view full answer... - Yakima Roof Rack to Fit Truck Topper Tracks on 2005 Nissan FrontierSince you already have Yakima tracks on your topper you can complete the roof rack using Landing Pad 1, part # Y00221, with Control Towers, part # Y8890027, and round crossbars. You need two sets of the landing pad and four control towers. Then choose your length of crossbar: 48 inch - # Y00408 58 inch - # Y00409 66 inch - # Y00410 78 inch - # Y00411 86 inch - # Y00420
view full answer... - Roof Rack Fit Recommendation for ARE Truck TopperThere were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: 4 of the Yakima Control Towers # Y8890027 2 sets (2ea) Yakima Landing Pad 1 # Y00221 1 set (2ea) Yakima Crossbars: 58 inch bars are # Y00409 66 inch bars are # Y00410 78 inch bars are # Y00411
view full answer... - Roof Rack For 2005 Buick Rendezvous That Can be TransferredThe only roof rack that can be transferred from your 2005 Buick Rendezvous to a different vehicle is one that uses vacuum cups to attach, the SeaSucker Monkey Bars Roof Rack # 298-SX6000B. Otherwise, roof racks are specific to each vehicle, so if you wanted a custom fit rack, the only option for your '05 Rendezvous is the following from Yakima: - Yakima JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 1 # Y00221
view full answer... - Yakima HD Crossbars Compatible With RetraxONE XR Hard Tonneau Cover # RTT-60245 On 2021 Ram 1500You can use the Yakima HD Crossbars # Y01159 with the SkyLine Towers # Y53TR as long as you use the HD Bar SL Adapter # Y03541. You will need 2 sets of the Landing Pad # Y00221 to connect the towers to the T-Slots in the RetraxONE XR Hard Tonneau Cover # RTT-60245. The SkyLine tower is going to give you 3" of height while the landing pad for attaching to the t-track will give you another 1" of height so you will have the clearance necessary to clear the latch.
view full answer... - Is There A Better Roof Rack Solution For A 2011 Toyota Corolla Than My Yakima Q-TowersThe aftermarket roof tracks, such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 39-3/16" Long - Qty 2, part # RRRTS534, are not test fit for vehicles. The rack manufacturers recommend that you to a garage that specializes in aftermarket body work to do the installation. It will be up to the shop you take your 2011 Toyota Corolla to determine whether or not the Rhino-Rack RT Style Roof Rack will fit your vehicle. If you get the OK for the Rhino Rack tracks you will need these...
view full answer... - Length of Crossbars Needed on ARE Cap for Thule Hullavator & Motion XT Cargo BoxYou can mount the Thule Motion XT Rooftop Cargo Box # TH629806 and Thule Hullavator Pro Kayak Carrier # TH898 on your Tacoma's ARE truck cap with Yakima tracks, but the 60 inch bars aren't wide enough. The Motion XT is 36" wide and the Hullavator takes up 28-1/2" of crossbar space so there isn't quite enough room for both to fit comfortably. What you will need instead are the 70" crossbars, the Yakima JetStream Crossbars 70" Long - # Y00427. Since you already have the tracks, the other...
view full answer... - How To Mount Yakima Towers In Retrax Tonneau Cover TracksIf you have the Yakima Skyline or Control Towers then you can use the Landing Pad 1 for Yakima SkyLine and Control Towers part # Y00221 to mount them into tracks/channels like those found on select Retrax Tonneau Covers.
view full answer... - Roof Rack And Kayak Carrier Recommendation For A 2022 A.R.E CXW Camper Shell On A Toyota TacomaThe rails on your A.R.E camper shell is made by Yakima, so to install a roof rack onto the rails, you will need: -4 Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027. -2 Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221. -1 set of the Round 58" CrossBars for Yakima Roof Rack System # Y00409. Since you also mentioned you wanted to carry kayaks, you can use the Yakima JayLow Kayak Carrier w/ Tie-Downs - J-Style or Post Style # Y04073, which will mount to...
view full answer... - Roof Rack Recommendation for a 1995 Pontiac Grand Prix 2 DR CoupeI recommend going with a Yakima Roof Track System for your 1995 Pontiac Grand Prix 2 Dr Coupe. This track mounts directly to the roof of your Grand Prix with PlusNut hardware. Installation does require drilling through the roof of your vehicle so if you are uncomfortable doing this yourself, I strongly encourage you to take your vehicle to a local body shop to have the track system installed. Each component for the Yakima Roof Track System is sold separately so in order to have the complete...
view full answer... - Recommended Tonneau Cover with Rails for 2019 Ford Ranger For Kayak or SUP TransportFor your 2019 Ford Ranger I recommend the Pace Edwards UltraGroove Metal Hard Tonneau Cover - Retractable - Aluminum - Matte Black # 311-KMFA31A62 for a 6 foot bed or # 311-KMFA30A61 for a 5 foot bed. The The T-tracks on the UltraGroove are designed to work with roof rack crossbars and other accessories. To add a set of crossbars to these tracks I recommend the Yakima 60 inch JetStream Bars # Y00425 along with the Landing Pad # Y00221 and Towers # Y53TR to attach them to the tracks. If...
view full answer... - Replacement Parts for Yakima Roof Rack Installed on 2011 Chevrolet Suburban with Roof TracksThe Yakima Replacement Hardware Kit # Y8890028 that you referenced is the correct one for use with their Landing Pad 1 for roof racks. The Yakima Landing Pad 1, part # Y00221, is the correct one for your 2011 Chevrolet Suburban with factory installed roof tracks. Please see the linked page.
view full answer... - Recommended Roof Rack System for A.R.E. Camper Shell with TracksThe items mentioned in your question are exactly what you need to install a roof rack system to the A.R.E. Camper Shell on your Ford F-150. Just to confirm, you will need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper...
view full answer... - Will the Rhino Rack Tracks Work with Yakima Control Towers and What Is the Length of Mounting BoltsThe 63 inch Rhino Rack RTC Style Roof Rack Tracks, # RTC16, come with 8 T-bolts for each track, 16 total, and each T-bolt measures 1 inch long. Although manufacturers typically do not recommend using another company's towers on their track, I went to our warehouse and pulled a set of the RT Style Rhino Roof Tracks and the Yakima Landing Pad1, #Y00221 to perform a test fit to ensure compatibility. All parts performed just as they should so yes, the Rhino Rack RTC Style Tracks will work...
view full answer... - Is Yakima Landing Pad 1 Compatible With Rhino-Rack RTC-Style Roof Rack Tracks - Channel MountYes, the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long - Qty 2, part # RTC18, will work with Yakima's Landing Pad 1. The rack will consist of the following; SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4, part # Y53TR, Two pair of Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2, part # Y00221, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204, and the correct sized Yakima crossbars. The...
view full answer... - Can I Put a Tent on Top of My 1995 Jeep YJ with a Hardtop?While we do have roof rack systems that will fit your jeep, the issue is that your roof has a maximum weight capacity of 100 lbs. Even if you got the roof rack system with parts # Y00426, # Y01126, # Y53TR, # Y00221, you wouldn't have enough weight capacity for a tent. For example, the Yakima Sky Rise Tent # Y07436 weighs 101 lbs on its own and requires a roof weight capacity of at least 165 lbs. Your options from here is to either try to find an exo-style system to increase your roof...
view full answer... - Yakima Roof Rack and Bike Rack Recommendation for Tracks on a Pop-Up CamperFrom the looks of your photos, you have the Yakima Round Crossbars like the # Y00411 along with the old Control Towers # Y8890027. If you are looking for a newer model of crossbars that have a more aerodynamic design that fit into the tracks, I recommend the following setup: - Yakima JetStream Crossbars - 70" # Y00427 - Yakima SkyLine Towers # Y53TR - 2 sets of the Landing Pad 1 # Y00221 - Same-Key Locks # Y07204 With this setup, the JestStream crossbars create a much quieter ride and...
view full answer... - Roof Rack And Cargo Carrier For 2001 Ford ExcursionWe do offer a roof rack system that will fit your 2001 Ford Excursion with the factory side rails. I recommend the Yakima roof rack that has 58 inch round crossbars. When ordering this roof rack system you will need to order part # Y00409, part # Y00221, part # Y03536, and part # Y53TR. We currently do not offer any roof baskets that have open ends as you are describing. The largest roof basket i can recommend is the Surco Safari Rack 5.0 Rooftop Cargo Basket, part # SPS5084-Y400. This...
view full answer... - What Yakima Roof Rack Do You Recommend For My 2022 Toyota Tacoma With A Camper ShellYou will be able to put Yakima tracks on your shell. The rack will consist of the following: Yakima 42" Tracks for Roof Racks, part # Y01126 Yakima CoreBar Crossbars, part # Y00421, SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 1 for Yakima SkyLine and Control Towers, part # Y00221, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. The crossbars have a weight limit of 220 lbs, but check your shell owner's manual to find out its weight limit. Your racks maximum...
view full answer... - Parts Needed to Add Yakima Rack to Thule Tracks on Leer CamperYep, you can put a Yakima roof rack in the Thule tracks on your Leep truck cap. I'll go ahead and list out the parts you need: - (Order a quantity of 2 of these) Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - SkyLine Towers for Yakima Crossbars # Y53TR - 50" Long Yakima JetStream Crossbars # Y00425 OR - 60" Long Yakima JetStream Crossbars # Y00426 OR - 70" Long Yakima JetStream Crossbars # Y00427 You'll want to measure the width of your tracks and get ones that extend...
view full answer... - Landing Pad Recommendation for Yakima Roof Tracks Y01127 for Installing 48 inch Round CrossbarsThe correct landing pad to go with the Tracks part # Y01127 is the Landing Pad 1 part # Y00221. Then for control towers you would need part # Y8890027 for individual towers, and then for 48 inch crossbars part # Y8810021.
view full answer... - What Are Yakima Shear Blocks Y8810006 and Yakima Shear Block Bases Y8810007 Made Out OfThe Yakima Shear Block # Y8810006 you mentioned are made out of aluminum, and the Shear Block Bases # Y8810007 are made out of a tough Zytel nylon. You may be able to modify these to secure your Yakima round bars to the side of your trailer, but these towers were designed to attach to rain gutters like what you would find on some Jeeps. You may be able to modify these components to allow them attach to a flat surface but I do not have any information on what would need to be done. To...
view full answer... - Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack TracksYes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following: 48" Round Bars - # Y00408 58" Round Bars...
view full answer... - Roof Rack for Leer Cap With Factory Tracks on 2015 Ram 1500You can absolutely get a roof rack for the factory tracks of the Leer cap on your 2015 Ram 1500. I have spoken about this exact issue with Yakima and they have told me the exact parts you need for a roof rack on your truck cap, which is the following: - Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2) - SkyLine Towers for Yakima Crossbars # Y53TR Crossbars (the correct length will depend on how wide the tracks are on your Leer cap, so just be sure to measure and then choose...
view full answer... - How to Order Yakima HardTop Roof Rack without Roof TracksYou'd need two sets of the Landing Pad 1 # Y00221, the 60 inch CoreBars # Y00422, and SkyLine Towers # Y53TR and you'd have everything the discontinued Y01618 has without the tracks.
view full answer... - Yakima Roof Rack to Fit Truck Topper Tracks on 2005 Nissan FrontierSince you already have Yakima tracks on your topper you can complete the roof rack using Landing Pad 1, part # Y00221, with Control Towers, part # Y8890027, and round crossbars. You need two sets of the landing pad and four control towers. Then choose your length of crossbar: 48 inch - # Y00408 58 inch - # Y00409 66 inch - # Y00410 78 inch - # Y00411 86 inch - # Y00420
view full answer... - Roof Rack Fit Recommendation for ARE Truck TopperThere were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: 4 of the Yakima Control Towers # Y8890027 2 sets (2ea) Yakima Landing Pad 1 # Y00221 1 set (2ea) Yakima Crossbars: 58 inch bars are # Y00409 66 inch bars are # Y00410 78 inch bars are # Y00411
view full answer... - Roof Rack For 2005 Buick Rendezvous That Can be TransferredThe only roof rack that can be transferred from your 2005 Buick Rendezvous to a different vehicle is one that uses vacuum cups to attach, the SeaSucker Monkey Bars Roof Rack # 298-SX6000B. Otherwise, roof racks are specific to each vehicle, so if you wanted a custom fit rack, the only option for your '05 Rendezvous is the following from Yakima: - Yakima JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 1 # Y00221
view full answer... - Yakima HD Crossbars Compatible With RetraxONE XR Hard Tonneau Cover # RTT-60245 On 2021 Ram 1500You can use the Yakima HD Crossbars # Y01159 with the SkyLine Towers # Y53TR as long as you use the HD Bar SL Adapter # Y03541. You will need 2 sets of the Landing Pad # Y00221 to connect the towers to the T-Slots in the RetraxONE XR Hard Tonneau Cover # RTT-60245. The SkyLine tower is going to give you 3" of height while the landing pad for attaching to the t-track will give you another 1" of height so you will have the clearance necessary to clear the latch.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.