Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Sleek, hybrid RV kitchen faucet has 1/4-turn ceramic stems that prevent leaks so you won't have to worry about wasted water. The gooseneck spout rotates around so you can access the faucet from multiple angles around your countertop.
Features:
Specs:
To install, use the brass inlet shanks to drop the new faucet and deck plate in place of your existing faucet. Then tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Phoenix Faucet's brushed nickel finish, 8 inch dual handle, RV kitchen faucet. This faucet has a nice brushed nickel finish to it. It is a combination plastic polymer, powdered metal hybrid shield and under-body. Basically what it means is the spout portion, the base, the handles, are all a powdered metal. Underneath is a polymer lining. If you see the brass shanks are used for the waterline connections, and then they use the plastic lock nuts with rubber washers to install. On the inside of this faucet they do use a ceramic cartridge.
The handles you can see, they're a dual lever handle for hot and cold water. You notice they are a quarter turn handle, so they use the quarter-turn washerless valves on the inside. This faucet does have a flow rate of 2.2 gallons per minute. To install this it is a 2-hole mount. Basically the brass shanks is what will connect to your water lines. I just want to give you a measurement of the distance center to center between the two is 8 inches.
Basically when you go to install this, you just remove your plastic lock nuts and the rubber washers on each shank. Just align the faucet with the holes in your sink or your counter. Drop it into place. Put your washers on. Put your plastic lock nuts on, and then tighten it down to secure it. I do want to give you a few measurements.
The spout length; we're basically going to measure from the back here to the end here. You can see it's going to be right at 9 inches for the spout length. Now the heighth; we're going to measure when this is installed from the base all the way up to the very top portion. If we put a ruler on the very base, and if you see up to the top portion, it's going to be right at about 11 inches for the heighth. The depth will be measured from the front of the spout to the very back here. Again, if we put it on there all the way to the back it's going to be about 10 inches for the depth.
The width would basically be the width right here of the base portion, edge to edge. If we put a ruler on that, we can see it's going to be right at 10-1/4 inches. The last measurement is going to be the shank length. That's the measurement of these brass shanks that the waterlines connect to, from the bottom of the base to the end is going to be right at 2 inches for the shank length. This faucet does come with a nice set of detailed instructions. The instructions are very helpful because it tells you how to install this. That should do it for the review on the Phoenix Faucet's brushed nickel finish, 8 inch dual handle, RV kitchen faucet.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews

Brooke M.
6/24/2025
That's awesome, William! Thank you very much :D I will also be sure to pass this along to Courtney - I know it's going to make her day that much brighter, too :)

Tod
5/12/2025
Still going strong after a year! No issues at all.

Ken
10/8/2022
Great faucet. No problems

Doug
2/1/2022
Still works good!!

Jimyg
7/8/2024
Great
Do you have a question about this RV Faucet?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Joann L.
6/17/2020
Still working great