Stylish, sleek dinette tabletop has cherry wood-grain finish that matches the decor in your RV or camper. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack. Leg kit sold separately.
Features:
Specs:
Need to directly replace the scratched-up etrailer dinette tabletop in your RV? Or perhaps you just want to upgrade to a stronger, more durable tabletop surface? This wood-grain laminate dinette tabletop provides you and your family with a level, sturdy surface in your RV or camper to enjoy meals, play board games, or work on your laptop. The tabletop's high-density EPS foam core is strong enough to hold up through years of family dinners. And the contemporary, cherry finish will look great with the decor in your RV.
Looking for a complete table with legs? We offer this tabletop with a single leg kit (e78CR, e88CR) and a dual leg kit (e49BR, e77BR) as well.
Unlike other furniture that have raw wood edges, this long-lasting tabletop has edge banding trim around all 4 sides to prevent peeling, cracking, or warping. That means it won't break if one of the kids accidentally drops a drinking glass, and it'll seal out the moisture from the spilled water. The color of trim matches the rest of the tabletop, which gives you a clean, seamless look.
There are 3 white circles on the back, which give you a general suggestion for where to mount your existing leg kit. For the best table stability, we recommend installing a 1-leg kit onto the middle circle and a 2-leg kit onto the outer circles, or no more than 24" apart. But you can install the leg kit anywhere along the internal steel mounting plate. The 30" x 10" plate will help improve screw retention for when you attach the leg kit to the tabletop.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today I'm gonna take a look at this Replacement etrailer 40-inch by 30-inch Cherry Wood RV Dinette Tabletop. Now this part'll replace or upgrade the tabletop that's on your etrailer RV Dinette Table, or it can be used with other dinette brands of the same size. It is designed to work as a direct replacement for the etrailer dining tables, part number e78CR and e88CR. Both of those tables we sell separately on our website.
Now this is just for the tabletop itself. It will require one or two table leg kits for complete setup. And those table leg kits we sell separately on our website and they're listed on this product page as a related product. If you want the flush mount table leg, it's a part number e69RR. If you want the surface mount table leg, it's e79RR.
Now this is a nice ultra-strong high-density EPS foam tabletop core, ensures durability and stability. Has a nice cherry wood grain laminate on it, provides the perfect accent color for your existing decor and has the edge banding. I wanna show you. We're gonna zoom in on that. I zoom in.
If you look all the way around the table edge, they use this banding that'll reinforce the table sides, helps seal moisture out, prevents the tabletop from any peeling, cracking or warping. And you can see it has the same cherry wood grain as your table. Now on the underside of this tabletop, we're gonna flip it over so you can see. We wanna explain to you there's three large circles there. And the reason those are there, this will let you know where the internal screw plate is located on the inside of this tabletop.
And that'll basically, that screw plate will help you assist with screw retention when you attach your table leg to the table. Now, if you install one leg, you wanna put it in the middle circle right here. If you install two legs, would be the two outer circles. But basically this is the same size as the flange on your table leg. So you just line up the flange circle with this one on the table, put in the screws to hold it into place. This part is made in the USA. Two specs on this, the dimensions. The length, this end to this end, is 40 inches. The width, this side to this side, is 30 inches. And the thickness on this table top is right at one-and-a-quarter inches thick. Total weight on this is about 20 pounds. But that should do it for the review on this Replacement etrailer 40-inch by 30-inch Cherry Wood RV Dinette Tabletop..
Ratings & Reviews
To be honest with you, I think the table top by itself was pretty high priced. But we have fast delivery and in excellent condition.
Great Selection @ Great Prices w/ Free Delivery
We love the table top but a came with a little chip it should be packaged with foam all the way around, because I think UPS don’t care and probably damaged it.
It is pretty heavy. It weighs 23.5 pounds. I’m replacing my Airstream dinette table top, and that only weighs 11.5 pounds. I’m concerned about the ability of the pedestal to support it.
Appears to be very high quality and in perfect condition on arrival. It is about 1/2 inch wider than the original table in my Thor FW 23U, but I knew that when I placed the order.
surprisingly good quality. moved my front bench up and put table on same dream dinette lift even though lift was offset to match orig table, whole install came out clean
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.