bing tracking image
  1. RV Awning
  2. Solera
  3. Patio Awnings
  4. 10-1/2 Feet Wide
  5. Black Fade
  6. Fabric/Rollers
Replacement Roller and Fabric Kit for 10-1/2' Solera Power RV Awning - Built-in LED - Black Fade
Solera

Replacement Roller and Fabric Kit for 10-1/2' Solera Power RV Awning - Built-in LED - Black Fade

Part Number: LCV000322436
In Stock
$854.37
RV Awning
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Solera 10'6" power awnings with a built-in LED strip that extends 8' from your RV. Installs more easily than replacing just the fabric. Great Prices for the best rv awning from Solera. Replacement Roller and Fabric Kit for 10-1/2' Solera Power RV Awning - Built-in LED - Black Fade part number LCV000322436 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (93)
  • Q & A (0)
  • Videos (2)
  • Photos

Solera RV Awning - LCV000322436

Highlights

  • Saves Hours on Replacement: Roller and fabric come pre-assembled, so you just slide on and go.
  • Brightens Campsite Evenings: Built-in LED light strip hardwires to your existing light switch.
  • Holds Up in Harsh Weather: 13.5-oz vinyl is cold-crack tested to -25°F with heat-welded seams.
  • Clean, Modern Look: Black Fade fabric transitions from black at the RV wall to white at the edge.
  • Fits 10-1/2' Solera Power Awnings: Designed for 126" arm spacing and 8' (96") extension.
  • Backed for Long Use: Includes 1-year limited warranty on roller and 5-year on fabric.
Made in USA

Features to know about

Save Time on Awning Repairs: Roller and Fabric Come Pre-Assembled

This replacement kit for Solera 10-1/2' power awnings makes it easy to swap out old or damaged parts. The roller tube and heavy-duty 13.5-oz vinyl fabric come pre-installed together, so you don’t have to wrestle with feeding fabric through the roller or rail. Just slide the fabric into the awning rail, attach the roller to the arm heads, and you’re ready to go. It’s a straightforward fix that gets your setup working again without losing a whole weekend.

Replacement Roller and Fabric Kit for 10.5-foot Solera Power RV Awning with built-in LED light strip in black fade color, showing the roller tube and fabric layout.

Built-In LED Strip: Enjoy Light Without Extra Wiring

The roller assembly includes a built-in LED light strip that connects to your existing Solera light switch. Once installed, it gives you bright and even lighting right under your awning without having to add separate fixtures. If you already have the switch from kit LC674282 or LC674283, the lights are ready to wire in and use.

Lasting Protection in Any Weather: Durable 13.5-oz Vinyl Fabric

The fabric is made from premium 13.5-oz vinyl that’s built to handle outdoor exposure season after season. It’s cold-crack tested down to -25°F, so it keeps its flexibility in freezing weather instead of stiffening or splitting. The seams are heat-welded to stop water from seeping through, giving you a long-lasting barrier against rain and sun.

Clean, Modern Look: Black Fade Fabric and Black Roller Tube

The Black Fade design starts dark at the roller and gradually lightens toward the outer edge, giving your setup a clean, modern look when extended. The black roller tube blends nicely when the awning is retracted, keeping the overall appearance sleek and consistent.

Get the Right Size the First Time: Fits 10-1/2' Solera Power Awnings

This assembly fits Solera 10'6" power awnings with a built-in LED strip that extends 8' from your RV. The roller measures 10-1/2' wide, and the fabric is 9'7" (115") wide. Measure from the center of your awning’s left arm to the center of its right arm—126" on center—to confirm fit. Do not order based on the old fabric width, as it will come up short.

Warranty: 1-Year limited on the awning roller and 5-Year on the fabric.

Specs

Application

  • Application: Solera 10'6" power awnings with an LED light strip
  • Width: 126" (measured from center of left arm to center of right arm)

Dimensions

  • Fabric: 9'7" (115") wide
  • Roller tube: 10-1/2' wide

Warranty

  • Awning roller: 1-Year limited
  • Fabric: 5-Year

Note

  • Important: You must already have the switch from kit LC674282 or LC674283 to use the LED lights.

V000322436 Replacement Lippert Solera Power Awning Roller Assembly - 10' 6" Awning - 9'7" Fabric - Black Fade





Video of Replacement Roller and Fabric Kit for 10-1/2' Solera Power RV Awning - Built-in LED - Black Fade
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Solera Replacement Awning Fabric Measurement and Installation

Hi there RV and camper owners. Today we're going to be replacing the awning fabric here with Solera's replacement fabric. These fabrics come in a variety of different sizes and color scheme, so you can get the best one to match your particular RV or trailer. We're going to be covering in detail on how to measure and determine the appropriate size for your trailer, as well as in detail steps on how to get that old fabric removed and your new one installed. If your old worn out fabric looks like this, where you've got stains and mold and dirt and debris, sure you can clean some of it but it's probably never going to come completely clean again. And to top it off, we've got some tears and stuff here, so when we're sitting outside, we get drips on our head.

The best way to correct that is to just replace the entire fabric. Now, regardless of how long your awning is, they are all going to install the same. Now whether it's a short one or a long one, let's go ahead and get into it and get this old one retired and a nice new one up on there. And now don't worry if your awning has a built-in LED strip, we also have RV awnings replacement fabric with the LED strip installed in them as well. With a replacement fabric the main thing that you need to figure out is how big the fabric is that you're going to be replacing, because the replacement is going to be basically the same for all of our Solera fabrics here for your Solera systems.

So in order to determine which fabric is going to fit your motorhome, cause you can't necessarily just go off the make and model of your trailer or RV because there's so many different sub models and you can have various different lengths of awnings that can come pre-installed on those, based on those various sub models and options that are out there. So, to determine the correct size, we're gonna measure center to center between our arms. And what I like to do is clip onto the inside lip of one arm, and then if I stretch this out from the inside lip of that arm, and go all the way down and go to the outside lip of our other arm, that's going to give us our center measurement. And we're right at 21' for this setup, so that way we know we need to order a 21' fabric. Now the fabric itself is not going to be exactly 21'.

It's going to be properly sized to fit an awning that is spaced 21' apart. So, whatever yours measure center to center, make sure you order that correct fabric here at etrailer. We begin our installation by extending our awning out by about a foot here. We then want to take our arm here and we want to tie it to the upper pin here, and that'll ensure that it's going to stay in place for us here. We're going to use some zip ties.

You can use some twine if you've got that at home. Whatever you really have to just loosely secure it. And we'll secure the other side the same way. Once we've got both sides zip tied, we're going to take the screw here that's holding our fabric into the rail, and we're going to remove it. In most cases, that's going to be a 1/4" socket. And then you also want to see the gap here. That's where the cord for our fabric runs through. And it's secured into place with a single screw as well. So we're going to remove that. We're using a Phillips screw to remove this one. It looks like it would also accept the square bit. We're going to be removing those bolts over on the other side as well to get our fabric free so we can get it out of here. Now I'm going to use a little paint stick. I just want to make sure that I've got it marked on each side, so I know which way that this is going to roll. So our fabric comes in on the top. And we're just going to put a down arrow on this side, And we're going to put a down arrow on the other side showing that the fabric goes down over the top of it. This is just to make it easier to ensure that when we're putting this back together, we've got it spooled up with the tension and everything all in the correct direction, so that way it's going to operate the way it used to. We don't want this to be underslung either, cause that can potentially cause water to pool up and lead to water damage and stains and everything else, and mold underneath here. So, we want it to be just like our old one here. Now we'll want to take out the screws in our end cap here. There's going to be three around our end cap. I recommend a square bit on these. You can use a Phillips, but a #2 square bit just seems to work better. When we go to remove our roller assembly down here, we're going to need one, possibly two or three extra sets of hands here, depending on how long our roller tube is. So, now we've got these loose, we're going to loosen them on the other side. Now you just want to check your drip channel here at the end on both the front and rear. See which one's going to be easier for you to slide your fabric out. It looks like ours is going to be able to slide out through the channel here with no issue. But if you're, if this is going to be in the way of getting your fabric out, you want to make sure you remove this, and you can reinstall it once we get our new fabric on. Now, we've got ourselves an extra set of hands here. We're going to take our arms here, and we're going to slide the caps off the ends. After we've got it loose from both ends, we just need to slide it down and work it on its way. You may need to stop and move your ladder at a couple of points. That's why we've got so many extra sets of hands. Alright, thank you, boys. Now it's on a large flat area where we can lay this out, your driveway should work pretty well, and then we'll just start to unroll it. And now that we've got it all rolled out, the tube assembly here, it's just going to slide right off. Now we can get our old fabric retired here. We're going to go ahead and get it rolled up and get it out of the way. We're going to take our new fabric and we're going to lay it out just like you see here with our new fabric. Now, your new one's going to come in a much smaller box than you would imagine because it is all folded up, so you just need to get it unfurled. So, now we can take new fabric. This here is the small flap that kind of hangs down over the end. And the other side is the side that will attach to the strip that goes across the top of your RV or trailer. So, we can take our roller assembly now. Our new fabric only has a single channel unlike the dual that we had before. That's no big deal. It's still going to function the same as it did before. So, we're just going to just slide it through one channel. So, we'll just take the end, line it up there, and then we're just going to gently work this down, kind of lifting up on it slightly cause I don't want the roller to drag on our fabric. So we don't want to gouge into it while we're trying to slide this down. This is a used, you know, it's an older roller, so it's been out in the elements for a while, so the edges might not be as smooth as they used to be when it was brand new. And as I'm working this down, I'm trying to keep my fabric taut. That makes it slide a little bit easier as we're doing this. Kind of using my knee and my arms here as a brace to do so. Then I want to just get our fabric centered on our tube. And then if we roll it in just a little bit, we can see the cord here where it slid into our tube. We can also kind of see the markings from where our cap is. We want to re-install the screw that holds our fabric in place. Thread it in there. Make sure this screw though doesn't end up underneath where your cap's going to go. So, we're going to go in just a little bit from that. And this is just the old screw that we had before, we're just reinserting it. We're going to do the same thing on the other side as well to ensure that our fabric is held. And another thing that I'm going to do as I go down the other side, I'm just going to double-check the cord to make sure that it is pulled taut all the way down. Now, with extra hands we're going to have them pull our fabric taut, and we're just going to roll it up. We just want to keep it snug on the roller as we're rolling it. And we need to get it most of the way rolled up. We're going to keep about a foot like we had before when we we're removing our old one, so we can get it slid back in. So, now with our extra hands once again, we're going to get this fed back in the end here. Your just going to slide it right in to the end where we've removed our old one. And you get that set into place. You want to be careful not to tear your fabric. You just kind of work it slowly down in the groove and feed it on down. When you're feeding this down, you just gotta take your time and work at it. Sometimes you gotta lift it up and down to get the right angle to get it to keep on sliding. You can also use a little bit of silicone spray to help make it a little easier if it's really stuck. Once you've got it all the way fed down, we can then bring it back and we're going to push it back into our cup. Line up the slots with the slots in your cup and push it together. Once you've got it pressed in and then we'll just re-install our hardware into the opening holes. So now that we're fully attached here, we can go ahead and remove our straps that we had put into place. And really the only thing left at that point, is to reinstall the screws here. But I like to extend the awning out first, so that way I can make sure that I've got this slid in the position I want it to, so it's nice and straight and it's going to roll up properly. So, I do recommend that you maybe operate it once or twice, get this centered, and then run that screw in. So we're gonna go ahead and do that now. So, we'll extend our awning here. And now that we've got it extended out, we can go ahead and adjust our ends here, and run those screws back in, which that looks pretty good. So now that we've verified we've got it nice and centered so it'll roll up nice and smooth and not be offset, we can re-install our set screws here, to keep our awning in place so it stays centered. And now we're just going to retract it and make sure it rolls up properly. And if everything works good here, at that point, our installation is complete. Ready to get back out on the campsite and enjoy our new shade. Everything looks like it tucked up nicely. I do like to come on the ends here after I rolled it up to check to see if we've got like a cone shape here on the end showing that it's rolling up uneven. And we've got a very minimal one. I would say the cone is no more than about 1/4", and that's probably about as close as your going to be able to get it there. So that's pretty much perfect. It looks good on both sides. So we're ready to get out there and enjoy ourselves. And that completes our installation of Solera's awning fabric..

Ratings & Reviews

4.7

93 reviews
5 Stars
(76)
4 Stars
(12)
3 Stars
(2)
2 Stars
(1)
1 Star
(2)
Review Sort Icon
by:
Perfect replacement on my 2018 Thor Freedom Elite 30FE
by:
?????

Installed this awning roll tube assembly today, and everything fit exactly as it should. The assembly arrived in good condition, was straightforward to install, and operated smoothly once completed. The construction feels solid, and the awning rolls in and out evenly. Very satisfied with the quality and fit.
Kate F. profile picture
Etrailer Expert

Kate F.

8/31/2026

I am glad we had the right fit to keep you shady on your adventures Derek! What was your favorite adventure this year?

by:
Great product. fit well and easy instal.
Also great customer service from etrailer.
Kenny profile picture

Kenny

5/4/2026

Still looks like new. great product,would buy it again

by:
The awning and tube was well packaged and product undamaged.
by:
excellent service as always from etrailer came surpisingly quick great people to do business with and will continue to do so
by:
Typically people buy these for RV installations or replacements, I’m an avid RV’er and like most of us have awnings on our rigs. I decided why not on my house too! They’re easy to install and adjustable to give us the summer shade on the back of our house which faces due West. The only thing you need to do is buy a 115vac to 12vdc converter that can handle up to 80% of 30amps. Plenty of those are available. Using the Lippert “smart” arms also provide additional flexibility.
by:
I am extremely happy with my new awning. My original awning was destroyed by my own neglect. ETRAILER.COM was great, ordered a new awning unfortunately came in damaged. Contacted ETRAILER.COM sent a couple of pictures, and they sent me a whole new awning. With thier videos and instructions, it was extremely easy to install. I will recommend them to anyone that needs a new awning. Thank you ETRAILER.COM!
by:
Easy to install at a great price. Exactly what I was looking for.
by:
Stacey A. and the entire etrailer team are outstanding!
Replacement awning fabric and roller tube kit was exactly what I needed and it shipped quickly.
by:
I will recommend etrailer for all. everything I order came with in the time. I was very happy with the free shipping offered.
Aaron profile picture

Aaron

3/16/2025

I screwed up and ordered the wrong one, but I put my own led lights in, so my mess up still worded i am very happy with its still

Kate F. profile picture
Etrailer Expert

Kate F.

3/17/2025

@Aaron Glad you were able to get things figured out Aaron!
by:
I still don’t have the product and I want a refund!!
by:
So far, I have not uncrated the item as it is raining at our location. The customer service and delivery team have been simply awesome!!!
by:
Worked great, easy to install. Very happy.
by:
Great customer service!
Great shipping s
ervice.
All around excellent experience.
by:
It looked great. When the RV Repair Tech arrived and removed it from the shipping tube, it had been driven over with something pretty heavy. It broke the tube completely into and put a large flat spot on the roll. Tech saw it and said it could not be installed.
Mike L. profile picture
Etrailer Expert

Mike L.

9/4/2026

That's not good!! I'll get that replaced for you.

by:
Got the awning and it worked good. The package was damaged on the end but luckily the awning tube was not damaged. Thanks
by:
Delivery was a little off schedule (I guess do to factory coordination?) but telephone assistance and product delivery/quality were Good!
by:
Exactly like the stock one. At least before I ripped it off on that one lane road an hour outside of Nashville. Easy to replace. Pretty straight forward and it works like a charm.
by:
This was an exact replacement for a 10 year old camper/awning. etrailer had the materials in stock and the web site was easy to order from. I did note on the tracking info that there was damage reported early in the shipment. When the package arrived at the local terminal I received an delivery scheduling phone call. We discussed the note in the shipping history (the scheduler even sent me a pic from his cell) and I was able to convince the shipper to reject prior to delivery thus saving a good deal of hassle. A phone call to customer service at etrailer explaing the circumstance yielded a quick shipment of another awning. The awning came in a couple days and I was able to get it installed prior to a major trip.

First class customer service from etrailer!
Perfect part installed in about an hour.
by:
Great product, but wish it provided a way to mount my awning light the way my original awning did. There were no other issues.
by:
The awning is made very well. The end caps would not work on my arms. I was able to use the ones from my old tube. The length of the tube and material was 3 inches shorter than the awning I replaced. I had to modify it and add a piece of metal to make it wide enough so it would retract and line up with the arms. It is working fine. I was given conflicting information from e-trailer about if it would work with my current frame. I had no other choice but to modify and make it work.
by:
I think I may have,ordered the wrong product. I have a power awning and this appears to be for a manual system. Going to attempt to use the motor off existing tube. Thanks
Katrina B. profile picture
Etrailer Expert

Katrina B.

3/18/2022

I have checked out this product and spoke with one of our installers and the awning you had purchased LCV000223189 is a replacement for power awnings. As long as you have the Solera RV arms, this awning will fit perfectly into your set up. I have also attached a link below of our installation video., showing this particular awning being installed onto Solera power awning arms.

by:
Great add putting the electric awning on my rig. Reasonably easy to install and works great. Love the adjustable extension arms to lower a corner to run water off in one direction.
by:
This awning is a better quality than the original. It was very easy to replace even though we aren't professionals. Take note of how the original was set. Read the instructions. Easy! Thank you, etrailer!
by:
Awesome product.Thanks to Bob and his crew for the great install. See the install video.
Joe H. profile picture

Joe H.

5/3/2022

Holding up very well. No cracking or peeling.

25
93
true
Show More Reviews

See what our Experts say about this Solera RV Awning

  • Can Awning Fabric Be Glued Back Together If It Starts To Separate?
    Hey Jason, thanks for reaching out. You can try to glue it but, in my experience, there isn't really a reliable way to reattach the fabric once it starts to separate. The fabric is originally bonded and mechanically captured at the factory, and adhesives or tape (like duct tape) usually only work short term before heat, tension, and wind cause it to fail again. There really isn’t a “by-the-book” repair for that connection. Trying to glue it back in may buy you a little time, but it’s likely...
    view full answer...
  • Replacement 10-1/2 foot Wide Roller and Fabric with LED Light Strip LCV000322436
    Thanks for getting me the part number, based on that we have just what you need with the Replacement 10-1/2' Wide Roller and Fabric for Solera RV Awnings # LCV000322436 which is correct awning fabric and also has the LED strip light you mentioned as well.
    view full answer...
  • Is There An Awning Available Which Will Mount The Arms 126" on Center?
    You will need the Replacement Roller and Fabric Kit # LCV000322436 along with the Power Arms # LC434723 or Manual Arms # LC434727 as we do not have a all in one kit. This will place the awning arms 126" on center like you are needing.
    view full answer...
  • Availability of Awning Fabric Without Roller For Solera 10-1/2' Awning
    Hi Kyle; assuming your arm spacing is 126" center arm to center arm, the Replacement Roller and Fabric Kit for 10-1/2' Solera Power RV Awning # LCV000322436 is the only option. Unfortunately, the fabric is not available separately for this 10-1/2 awning. I recommend double checking the spacing just to be sure. If you end up with a different measurement feel free to add it in the comments below and I'll help you find the right replacement fabric. What kind of trailer do you have?
    view full answer...

Do you have a question about this RV Awning?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Matthew E
Updated by:
Matthew E
Employee Carrie F
Updated by:
Carrie F
Employee Amanda K
Updated by:
Amanda K
Employee Mike S
Written by:
Mike S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.